scholarly journals VALIDATION OF ASMR2 SEA ICE CONCENTRATION DATA USING MODIS DATA

2019 ◽  
Vol XLII-2/W13 ◽  
pp. 1741-1746
Author(s):  
K. Cho ◽  
R. Nagao ◽  
K. Naoki
Keyword(s):  
Sea Ice ◽  
Spatial Resolution ◽  
Microwave Radiometer ◽  
Threshold Level ◽  
Passive Microwave ◽  
Concentration Data ◽  
Sea Ice Concentration ◽  
Free Condition ◽  
Modis Data ◽  
Ice Concentration

<p><strong>Abstract.</strong> Passive microwave radiometer AMSR2 was launched by JAXA in May 2012 on-board GCOM-W satellite. The antenna diameter of AMSR2 is 2.0&amp;thinsp;m which provide highest spatial resolution as a passive microwave radiometer in space. The sea ice concentration images derived from AMSR2 data allow us to monitor the detailed sea ice distributions of whole globe every day. The AMSR bootstrap algorithm developed by Dr. Josefino Comiso is used as the standard algorithm for calculating sea ice concentration from AMSR2 data. Under the contract with JAXA, the authors have been evaluating the performance of the algorithm. The sea ice concentration estimated from AMSR2 data were evaluated using MODIS data observed from Aqua satellite within few minutes after AMSR2 observation from GCOM-W. Since the spatial resolution of MODIS is much higher than that of AMSR2, under the cloud free condition, the ice concentration corresponds to the size of a pixel of AMSR2 can be calculated much accurately with MODIS data. The procedures of the evaluation are as follows. Firstly, MODIS band 1 reflectance were binarized to discriminate sea ice(1) from open water(0) and sea ice concentration of each pixel size of AMSR2 were calculated. In calculating sea ice concentration from MODIS data, the selection of the threshold level of MODIS band 1 reflectance is critical. Through the detailed evaluation, the authors selected 5% as the optimum threshold level. Then the AMSR2 sea ice concentration of each pixel was compared with the sea ice concentration calculated from MODIS data. The result suggested the possibility of estimating sea ice concentration from AMSR2 data with less than 10% error under the cloud free condition.</p>

scholarly journals Ice Concentration Retrieval from the Analysis of Microwaves: A New Methodology Designed for the Copernicus Imaging Microwave Radiometer

2020 ◽  
Vol 12 (7) ◽  
pp. 1060 ◽  
Author(s):  
Lise Kilic ◽  
Catherine Prigent ◽  
Filipe Aires ◽  
Georg Heygster ◽  
Victor Pellet ◽  
...  
Keyword(s):  
Sea Ice ◽  
Spatial Resolution ◽  
Microwave Radiometer ◽  
Optimal Estimation ◽  
Arctic Sea Ice ◽  
The Arctic ◽  
Special Focus ◽  
Polar Regions ◽  
Sea Ice Concentration ◽  
Ice Concentration

Over the last 25 years, the Arctic sea ice has seen its extent decline dramatically. Passive microwave observations, with their ability to penetrate clouds and their independency to sunlight, have been used to provide sea ice concentration (SIC) measurements since the 1970s. The Copernicus Imaging Microwave Radiometer (CIMR) is a high priority candidate mission within the European Copernicus Expansion program, with a special focus on the observation of the polar regions. It will observe at 6.9 and 10.65 GHz with 15 km spatial resolution, and at 18.7 and 36.5 GHz with 5 km spatial resolution. SIC algorithms are based on empirical methods, using the difference in radiometric signatures between the ocean and sea ice. Up to now, the existing algorithms have been limited in the number of channels they use. In this study, we proposed a new SIC algorithm called Ice Concentration REtrieval from the Analysis of Microwaves (IceCREAM). It can accommodate a large range of channels, and it is based on the optimal estimation. Linear relationships between the satellite measurements and the SIC are derived from the Round Robin Data Package of the sea ice Climate Change Initiative. The 6 and 10 GHz channels are very sensitive to the sea ice presence, whereas the 18 and 36 GHz channels have a better spatial resolution. A data fusion method is proposed to combine these two estimations. Therefore, IceCREAM will provide SIC estimates with the good accuracy of the 6+10GHz combination, and the high spatial resolution of the 18+36GHz combination.

Sea–ice concentration at 1 km resolution in summer from merged visible and microwave radiometer observations

2021 ◽  
Author(s):  
Valentin Ludwig ◽  
Gunnar Spreen
Keyword(s):  
Spatial Resolution ◽  
Microwave Radiometer ◽  
Thermal Infrared ◽  
Passive Microwave ◽  
The Arctic ◽  
Sea Ice Concentration ◽  
Ice Concentration ◽  
Statistical Consistency ◽  
Microwave Data ◽  
Infrared Data

&lt;p&gt;Sea&amp;#8211;ice concentration, the surface fraction of ice in a given area, is a key component of the Arctic climate system, governing for example the ocean&amp;#8211;atmosphere heat exchange. Satellite&amp;#8211;based remote sensing offers the possibility for large&amp;#8211;scale monitoring of the sea&amp;#8211;ice concentration. Using passive microwave measurements, it is possible to observe the sea&amp;#8211;ice concentration all year long, almost independently of cloud coverage. The spatial resolution of these measurements is limited to 5 km and coarser. Data from the visible and thermal infrared spectrum offer finer resolutions of 250 m&amp;#8211;1 km, but need clear&amp;#8211;sky scenes and, in case of visible data, sunlight. In previous work, we developed and analysed a merged dataset of passive microwave and thermal infrared data, combining AMSR2 and MODIS satellite data at 1 km spatial resolution. It has benefits over passive microwave data in terms of the finer spatial resolution and an enhanced potential for lead detection. At the same time, it outperforms thermal infrared data due to its spatially continuous coverage and the statistical consistency with the extensively evaluated passive microwave data. Due to higher surface temperatures in summer, the thermal&amp;#8211;infrared based retrieval is limited to winter and spring months. In this contribution, we present first results of extending the existing dataset to summer by using visible data instead of thermal infrared data. The reflectance contrast between ice and water is used for the sea&amp;#8211;ice concentration retrieval and results of merging visible and microwave data at 1 km spatial resolution are presented. Difficulties for both, the microwave and visual, data are surface melt processes during summer, which make sea&amp;#8211;ice concentration retrieval more challenging. The merged microwave, infrared and visual dataset opens the possibility for a year&amp;#8211;long, spatially continuous sea ice concentration dataset at a spatial resolution of 1 km.&lt;/p&gt;

scholarly journals A long-term and reproducible passive microwave sea ice concentration data record for climate studies and monitoring

2013 ◽  
Vol 6 (1) ◽  
pp. 95-117
Author(s):  
G. Peng ◽  
W. N. Meier ◽  
D. J. Scott ◽  
M. H. Savoie
Keyword(s):  
Sea Ice ◽  
Passive Microwave ◽  
Climate Data ◽  
Concentration Data ◽  
Sea Ice Concentration ◽  
Ice Concentration ◽  
Data Record ◽  
Climate Data Record ◽  
Climate Studies

Abstract. A long-term, consistent, and reproducible satellite-based passive microwave sea ice concentration climate data record (CDR) is available for climate studies, monitoring, and model validation with an initial operation capability (IOC). The daily and monthly sea ice concentration data are on the National Snow and Ice Data Center (NSIDC) polar stereographic grid with nominal 25 × 25 km grid cells in both the Southern and Northern Hemisphere Polar Regions from 9 July 1987 to 31 December 2007 with an update through 2011 underway. The data files are available in the NetCDF data format at http://nsidc.org/data/g02202.html and archived by the National Oceanic and Atmospheric Administration (NOAA)'s National Climatic Data Center (NCDC) under the satellite climate data record program (http://www.ncdc.noaa.gov/cdr/operationalcdrs.html). The description and basic characteristics of the NOAA/NSIDC passive microwave sea ice concentration CDR are presented here. The CDR provides similar spatial and temporal variability as the heritage products to the user communities with the additional documentation, traceability, and reproducibility that meet current standards and guidelines for climate data records. The dataset along with detailed data processing steps and error source information can be found at: doi:10.7265/N5B56GN3.

scholarly journals Ice Concentration Retrieval from the Analysis of Microwaves: Evaluation of a New Methodology Optimized for the Copernicus Imaging Microwave Radiometer

2020 ◽  
Vol 12 (10) ◽  
pp. 1594
Author(s):  
Catherine Prigent ◽  
Lise Kilic ◽  
Filipe Aires ◽  
Victor Pellet ◽  
Carlos Jimenez
Keyword(s):  
Sea Ice ◽  
Spatial Resolution ◽  
Microwave Radiometer ◽  
Fine Tuning ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Polar Regions ◽  
Sea Ice Concentration ◽  
High Frequencies ◽  
Ice Concentration

A new methodology has been described in Kilic et al. (Ice Concentration Retrieval from the Analysis of Microwaves: A New Methodology Designed for the Copernicus Imaging Microwave Radiometer, Remote Sensing 2020, 12, 1060, Part 1 of this study) to estimate Sea Ice Concentration (SIC) from satellite passive microwave observations between 6 and 36 GHz. The Ice Concentration Retrieval from the Analysis of Microwaves (IceCREAM) algorithm is based on an optimal estimation, with a simple radiative transfer model derived from satellite observations at 0% and 100% SIC. Observations at low and high frequencies have different spatial resolutions, and a scheme is developed to benefit from the low errors of the low frequencies and the high spatial resolutions of the high frequencies. This effort is specifically designed for the Copernicus Imaging Microwave Radiometer (CIMR) project, equipped with a large deployable antenna to provide a spatial resolution of ∼5 km at 18 and 36 GHz, and ∼15 km at 6 and 10 GHz. The algorithm is tested with Advanced Microwave Scanning Radiometer 2 (AMSR2) observations, for a clear scene over the north polar region, with collocated Moderate Resolution Imaging Spectroradiometer (MODIS) estimates and the Ocean Sea Ice—Satellite Application Facilities (OSI SAF) operational products. Several algorithm options are tested, and the study case shows that both high spatial resolution and low errors are obtained with the IceCREAM method. It is also tested for the full polar regions, winter and summer, under clear and cloudy conditions. Our method is globally applicable, without fine-tuning or further weather filtering. The systematic use of all channels from 6 to 36 GHz makes it robust to changes in ice surface conditions and to weather interactions.

scholarly journals A long-term and reproducible passive microwave sea ice concentration data record for climate studies and monitoring

2013 ◽  
Vol 5 (2) ◽  
pp. 311-318 ◽  
Author(s):  
G. Peng ◽  
W. N. Meier ◽  
D. J. Scott ◽  
M. H. Savoie
Keyword(s):  
Sea Ice ◽  
Passive Microwave ◽  
Climate Data ◽  
Concentration Data ◽  
Sea Ice Concentration ◽  
Ice Concentration ◽  
Data Record ◽  
Climate Data Record ◽  
Climate Studies

Abstract. A long-term, consistent, and reproducible satellite-based passive microwave sea ice concentration climate data record (CDR) is available for climate studies, monitoring, and model validation with an initial operation capability (IOC). The daily and monthly sea ice concentration data are on the National Snow and Ice Data Center (NSIDC) polar stereographic grid with nominal 25 km × 25 km grid cells in both the Southern and Northern Hemisphere polar regions from 9 July 1987 to 31 December 2007. The data files are available in the NetCDF data format at http://nsidc.org/data/g02202.html and archived by the National Climatic Data Center (NCDC) of the National Oceanic and Atmospheric Administration (NOAA) under the satellite climate data record program (http://www.ncdc.noaa.gov/cdr/operationalcdrs.html). The description and basic characteristics of the NOAA/NSIDC passive microwave sea ice concentration CDR are presented here. The CDR provides similar spatial and temporal variability as the heritage products to the user communities with the additional documentation, traceability, and reproducibility that meet current standards and guidelines for climate data records. The data set, along with detailed data processing steps and error source information, can be found at http://dx.doi.org/10.7265/N55M63M1.

scholarly journals Evaluation of a New Merged Sea-Ice Concentration Dataset at 1 km Resolution from Thermal Infrared and Passive Microwave Satellite Data in the Arctic

2020 ◽  
Vol 12 (19) ◽  
pp. 3183
Author(s):  
Valentin Ludwig ◽  
Gunnar Spreen ◽  
Leif Toudal Pedersen
Keyword(s):  
Sea Ice ◽  
Spatial Resolution ◽  
Thermal Infrared ◽  
Poor Quality ◽  
Passive Microwave ◽  
The Arctic ◽  
Sea Ice Concentration ◽  
Continuous Coverage ◽  
Uncertainty Estimates ◽  
Ice Concentration

Sea-ice concentration (SIC) data with fine spatial resolution and spatially continuous coverage are needed, for example, for estimating heat fluxes. Passive microwave measurements of the Advanced Scanning Microwave Radiometer 2 (AMSR2) offer spatial continuity, but are limited to spatial resolutions of 5 km and coarser. Thermal infrared data of the Moderate Resolution Imaging Spectroradiometer (MODIS) provide a spatial resolution of 1 km, but are limited to cloud-free scenes. We exploit the benefits of both and present a merged SIC dataset with 1 km spatial resolution and spatially continuous coverage for the Arctic. MODIS and AMSR2 SIC are retrieved separately and then merged by tuning the MODIS SIC to preserve the mean AMSR2 SIC. We first evaluate the variability of the dynamically retrieved MODIS ice tie-point. Varying the starting position of the area used for the tie-point retrieval changes the MODIS SIC by on average 1.9%, which we mitigate by considering different starting positions and using the average as ice tie-point. Furthermore, the SIC datasets are evaluated against a reference dataset derived from Sentinel-2A/B reflectances between February and May 2019. We find that the merged SIC are 1.9% smaller than the reference SIC if thin ice is considered as ice and 4.9% higher if thin ice is considered as water. There is only a slight bias (0.3%) between the MODIS and the merged SIC; however, the root mean square deviation of 5% indicates that the two datasets do yield different results. In an example of poor-quality MODIS SIC, we identify an unscreened cloud and high ice-surface temperature as reasons for the poor quality. Still, the merged SIC are of similar quality as the passive microwave SIC in this example. The benefit of merging MODIS and AMSR2 data is demonstrated by showing that the finer resolution of the merged SIC compared to the AMSR2 SIC allows an enhanced potential for the retrieval of leads. At the same time, the data are available regardless of clouds. Last, we provide uncertainty estimates. The MODIS and merged SIC uncertainty are between 5% and 10% from February to April and increase up to 25% (merged SIC) and 35% (MODIS SIC) in May. They are identified as conservative uncertainty estimates.

Sign in / Sign up

Export Citation Format

Share Document