scholarly journals Joint interpretation of magnetotelluric, seismic, and well-log data in Hontomín (Spain)

Solid Earth ◽  
2016 ◽  
Vol 7 (3) ◽  
pp. 943-958 ◽  
Author(s):  
Xènia Ogaya ◽  
Juan Alcalde ◽  
Ignacio Marzán ◽  
Juanjo Ledo ◽  
Pilar Queralt ◽  
...  
Keyword(s):  
Seismic Data ◽  
Velocity Model ◽  
Unconsolidated Sediments ◽  
Well Log ◽  
Storage Site ◽  
Near Surface ◽  
Log Data ◽  
Velocity Models ◽  
Joint Interpretation

Abstract. Hontomín (N of Spain) hosts the first Spanish CO2 storage pilot plant. The subsurface characterization of the site included the acquisition of a 3-D seismic reflection and a circumscribed 3-D magnetotelluric (MT) survey. This paper addresses the combination of the seismic and MT results, together with the available well-log data, in order to achieve a better characterization of the Hontomín subsurface. We compare the structural model obtained from the interpretation of the seismic data with the geoelectrical model resulting from the MT data. The models correlate well in the surroundings of the CO2 injection area with the major structural differences observed related to the presence of faults. The combination of the two methods allowed a more detailed characterization of the faults, defining their geometry, and fluid flow characteristics, which are key for the risk assessment of the storage site. Moreover, we use the well-log data of the existing wells to derive resistivity–velocity relationships for the subsurface and compute a 3-D velocity model of the site using the 3-D resistivity model as a reference. The derived velocity model is compared to both the predicted and logged velocity in the injection and monitoring wells, for an overall assessment of the computed resistivity–velocity relationships. The major differences observed are explained by the different resolution of the compared geophysical methods. Finally, the derived velocity model for the near surface is compared with the velocity model used for the static corrections in the seismic data. The results allowed extracting information about the characteristics of the shallow unconsolidated sediments, suggesting possible clay and water content variations. The good correlation of the velocity models derived from the resistivity–velocity relationships and the well-log data demonstrate the potential of the combination of the two methods for characterizing the subsurface, in terms of its physical properties (velocity, resistivity) and structural/reservoir characteristics. This work explores the compatibility of the seismic and magnetotelluric methods across scales highlighting the importance of joint interpretation in near surface and reservoir characterization.

scholarly journals Joint interpretation of magnetotelluric, seismic and well-log data in Hontomín (Spain)

2016 ◽  
Author(s):  
X. Ogaya ◽  
J. Alcalde ◽  
I. Marzán ◽  
J. Ledo ◽  
P. Queralt ◽  
...  
Keyword(s):  
Seismic Data ◽  
Velocity Model ◽  
Co2 Injection ◽  
Well Log ◽  
Storage Site ◽  
Near Surface ◽  
Log Data ◽  
Velocity Models ◽  
3D Velocity Model ◽  
Joint Interpretation

Abstract. Hontomín (N of Spain) hosts the first Spanish CO2 storage pilot plant. The subsurface characterisation of the site included the acquisition of a 3D seismic reflection and a circumscribed 3D magnetotelluric (MT) survey. This paper addresses the combination of the seismic and MT results, together with the available well-log data, in order to achieve a better characterisation of the Hontomín subsurface. We compare the structural model obtained from the interpretation of the seismic data with the geoelectrical model resulting from the MT data. The models corr elate well in the surroundings of the CO2 injection area with the major structural observed related to the presence of faults. The combination of the two methods allowed a more detailed characterisation of the faults, defining their structural and fluid flow characteristics, which is key for the risk assessment of the storage site. Moreover, we use the well-log data of the existing wells to derive resistivity-velocity relationships for the subsurface formations and compute a 3D velocity model of the site using the 3D resistivity model as a reference. The derived velocity model is compared to both the predicted and logged velocity in the injection and monitoring wells, for an overall assessment of the resistivity-velocity relationships computed. Finally, the derived velocity model is compared in the near surface with the velocity model used for the static corrections in the seismic data. The results allowed extracting information about the characteristics of the shallow subsurface, enhancing the presence of clays and water content variations. The good correlation of t he velocity models and well-log data demonstrate the potential of the two methods for characterising the subsurface, in terms of its physical properties (velocity, resistivity) and structural/reservoir characteristics. This work explores the compatibility of the seismic and magnetotelluric methods across scales highlighting the importance of joint interpretation in reservoir characterisation.

Seismic reservoir characterization of the Bone Spring and Wolfcamp Formations in the Delaware Basin: Challenges and uncertainty in characterization using rock physics — A case study: Part 2

2020 ◽  
Vol 8 (4) ◽  
pp. T1057-T1069
Author(s):  
Ritesh Kumar Sharma ◽  
Satinder Chopra ◽  
Larry Lines
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization ◽  
Rock Physics ◽  
Well Log ◽  
Data Set ◽  
Frequency Model ◽  
Log Data ◽  
Delaware Basin ◽  
Seismic Reservoir

The discrimination of fluid content and lithology in a reservoir is important because it has a bearing on reservoir development and its management. Among other things, rock-physics analysis is usually carried out to distinguish between the lithology and fluid components of a reservoir by way of estimating the volume of clay, water saturation, and porosity using seismic data. Although these rock-physics parameters are easy to compute for conventional plays, there are many uncertainties in their estimation for unconventional plays, especially where multiple zones need to be characterized simultaneously. We have evaluated such uncertainties with reference to a data set from the Delaware Basin where the Bone Spring, Wolfcamp, Barnett, and Mississippian Formations are the prospective zones. Attempts at seismic reservoir characterization of these formations have been developed in Part 1 of this paper, where the geologic background of the area of study, the preconditioning of prestack seismic data, well-log correlation, accounting for the temporal and lateral variation in the seismic wavelets, and building of robust low-frequency model for prestack simultaneous impedance inversion were determined. We determine the challenges and the uncertainty in the characterization of the Bone Spring, Wolfcamp, Barnett, and Mississippian sections and explain how we overcame those. In the light of these uncertainties, we decide that any deterministic approach for characterization of the target formations of interest may not be appropriate and we build a case for adopting a robust statistical approach. Making use of neutron porosity and density porosity well-log data in the formations of interest, we determine how the type of shale, volume of shale, effective porosity, and lithoclassification can be carried out. Using the available log data, multimineral analysis was also carried out using a nonlinear optimization approach, which lent support to our facies classification. We then extend this exercise to derived seismic attributes for determination of the lithofacies volumes and their probabilities, together with their correlations with the facies information derived from mud log data.

scholarly journals The Use of Well-Log Data in the Geomechanical Characterization of Middle Cambrian Tight Sandstone Formation: A Case Study from Eastern Pomerania, Poland

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6022
Author(s):  
Małgorzata Słota-Valim ◽  
Anita Lis-Śledziona
Keyword(s):  
Seismic Data ◽  
Reservoir Rock ◽  
Rock Properties ◽  
Hydraulic Fractures ◽  
Well Log ◽  
Tight Sandstone ◽  
Middle Cambrian ◽  
Log Data ◽  
Geomechanical Characterization

Geomechanical characterization plays a key role in optimizing the stimulation treatment of tight reservoir formations. Petrophysical models help classify the reservoir rock as the conventional or unconventional type and determine hydrocarbon-saturated zones. Geomechanical and petrophysical models are fundamentally based on well-log data that provide reliable and high-resolution information, and are used to determine various relationships between measured borehole parameters and modeled physical rock properties in 3D space, with the support of seismic data. This paper presents the geomechanical characterization of the Middle Cambrian (Cm2) sediments from Eastern Pomerania, north Poland. To achieve the aim of this study, 1D well-log-based and 3D models based on seismic data of the rocks’ petrophysical, elastic, and strength properties, as well as numerical methods, were used. The analysis of the Middle Cambrian deposits revealed vertical and horizontal heterogeneity in brittleness, the direction of horizontal stresses, and the fracturing pressure required to initiate hydraulic fractures. The most prone to fracturing is the gas-saturated tight sandstones belonging to the Paradoxides Paradoxissimus formation of Cm2, exhibiting the highest brittleness and highest fracturing pressure necessary to stimulate this unconventional reservoir formation.

Sign in / Sign up

Export Citation Format

Share Document