AbstractThe performance of factorial designs is still limited due to some uncertainties that usually intensify process complexities, hence, the need for inter-platform auto-correlation analyses. In this study, the auto-correlation capabilities of factorial designs and General Algebraic Modeling System (GAMS) on the effects of some pertinent operating variables in wastewater treatment were compared. Individual and combined models were implemented in GAMS and solved with the trio of BARON, CPLEX and IPOPT solvers. It is revealed that adsorbent dosage had the highest effect on the process. It contributed the most effect toward obtaining the minimum silica and TDS contents of 13 mg/L and 814 mg/L, and 13.6 mg/L and 815 mg/L from factorial design and GAMS platforms, respectively. This indicates a concurrence between the results from the two platforms with percentage errors of 4.4% and 0.2% for silica and TDS, respectively. The effects of the mixing speed and contact time are negligible.
On Construction of Nonregular Two-Level Factorial Designs With Maximum Generalized Resolutions