scholarly journals Comparative Review of Long-Term Energy Storage Technologies for Renewable Energy Systems

2012 ◽  
Vol 118 (2) ◽  
Author(s):  
A. Andrijanovits ◽  
H. Hoimoja ◽  
D. Vinnikov
Author(s):  
Hilal Bahlawan ◽  
Agostino Gambarotta ◽  
Enzo Losi ◽  
Lucrezia Manservigi ◽  
MIrko Morini ◽  
...  

Abstract Hybrid energy plants, which include both fossil fuel technologies and renewable energy systems, can provide an important step towards a sustainable energy supply. In fact, the hybridization of renewable energy systems with gas turbines which are fed by fossil fuels allows an acceptable compromise, so that high fossil fuel efficiency and high share of renewables can be potentially achieved. Moreover, electrical and thermal energy storage systems increase the flexibility of the energy plant and effectively manage the variability of energy production and demand. This paper investigates the optimal sizing of a hybrid energy plant which combines an industrial gas turbine, renewable energy systems and energy storage technologies. The considered renewable energy system is a photovoltaic system, while the energy storage technologies are electrical energy storage and thermal energy storage. Moreover, a compression chiller and a gas boiler are also considered. For this purpose, the load profiles of electricity, heating and cooling during a whole year are taken into account for the case study of the Campus of the University of Parma (Italy). The sizing optimization problem of the different technologies composing the hybrid energy plant is solved by using a genetic algorithm, with the goal of minimizing primary energy consumption. Moreover, different operation strategies are analyzed and compared so that plant operation is also optimized. The results demonstrate that the optimal sizing of the hybrid energy plant, coupled with the optimized operation strategy, allows high average cogeneration efficiency (up to 84%), thus minimizing primary energy consumption.


Author(s):  
Hilal Bahlawan ◽  
Agostino Gambarotta ◽  
Enzo Losi ◽  
Lucrezia Manservigi ◽  
Mirko Morini ◽  
...  

Abstract Hybrid energy plants, which include both fossil fuel technologies and renewable energy systems, can provide an important step towards a sustainable energy supply. In fact, the hybridization of renewable energy systems with gas turbines which are fed by fossil fuels allows an acceptable compromise, so that high fossil fuel efficiency and high share of renewables can be potentially achieved. Moreover, electrical and thermal energy storage systems increase the flexibility of the energy plant and effectively manage the variability of energy production and demand. This paper investigates the optimal sizing of a hybrid energy plant which combines an industrial gas turbine, renewable energy systems and energy storage technologies. The considered renewable energy system is a photovoltaic system, while the energy storage technologies are electrical energy storage and thermal energy storage. Moreover, a compression chiller and a gas boiler are also considered. For this purpose, the load profiles of electricity, heating and cooling during a whole year are taken into account for the case study of the Campus of the University of Parma (Italy). The sizing optimization problem of the different technologies composing the hybrid energy plant is solved by using a genetic algorithm, with the goal of minimizing primary energy consumption. Moreover, different operation strategies are analyzed and compared so that plant operation is also optimized. The results demonstrate that the optimal sizing of the hybrid energy plant, coupled with the optimized operation strategy, allows high average cogeneration efficiency (up to 84 %), thus minimizing primary energy consumption.


2013 ◽  
Vol 6 (3) ◽  
pp. 1026 ◽  
Author(s):  
Jonathan E. Halls ◽  
Amanda Hawthornthwaite ◽  
Russell J. Hepworth ◽  
Noel A. Roberts ◽  
Kevin J. Wright ◽  
...  

2022 ◽  
pp. 779-804
Author(s):  
Muhammad Asif Rabbani

It is very important that the installed renewable energy system should produce the maximum power outputs with minimum costs, and that can only be achieved with the selection of the best optimization technique applied for the best control strategies along with the introduction of the hybrid energy storage systems (HESS). This chapter presents some optimization techniques applied in control strategies for hybrid energy storage systems in distributed renewable energy systems. The integration of energy production and consumption component through the smart grid concept enables increased demand response and energy efficiency. Hybrid energy storage systems and their applications in the renewable energy systems are extensively discussed besides control strategies involved. The storages systems will play an important role in future related to smart grid.


Energies ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 755 ◽  
Author(s):  
Umashankar Subramaniam ◽  
Sridhar Vavilapalli ◽  
Sanjeevikumar Padmanaban ◽  
Frede Blaabjerg ◽  
Jens Bo Holm-Nielsen ◽  
...  

In remote locations such as villages, islands and hilly areas, there is a possibility of frequent power failures, voltage drops or power fluctuations due to grid-side faults. Grid-connected renewable energy systems or micro-grid systems are preferable for such remote locations to meet the local critical load requirements during grid-side failures. In renewable energy systems, solar photovoltaic (PV) power systems are accessible and hybrid PV-battery systems or energy storage systems (ESS) are more capable of providing uninterruptible power to the local critical loads during grid-side faults. This energy storage system also improves the system dynamics during power fluctuations. In present work, a PV-battery hybrid system with DC-side coupling is considered, and a power balancing control (PBC) is proposed to transfer the power to grid/load and the battery. In this system, a solar power conditioning system (PCS) acts as an interface across PV source, battery and the load/central grid. With the proposed PBC technique, the system can operate in following operational modes: (a) PCS can be able to work in grid-connected mode during regular operation; (b) PCS can be able to charge the batteries and (c) PCS can be able to operate in standalone mode during grid side faults and deliver power to the local loads. The proposed controls are explained, and the system response during transient and steady-state conditions is described. With the help of controller-in-loop simulation results, the proposed power balancing controls are validated, for both off-grid and on-grid conditions.


Sign in / Sign up

Export Citation Format

Share Document