METHOD FOR MEASURING THE PRESSURE OF A SHOCK-ACOUSTIC WAVE OF AN ELECTRIC EXPLOSION OF A CONDUCTOR IN A DISCHARGE CHAMBER WITH A CONDENSED ENVIRONMENT

An electric explosion of conductors, as well as an electric discharge as a whole, is a poorly studied unique phenomenon that is widely used both in basic scientific research and in various technological processes, which determines the relevance of further studies of ongoing processes. In this paper, we consider the methods and carry out calibration procedures to determine the value of the conversion coefficient for a piezoelectric pressure transducer with a reactive acoustic waveguide made of non-Newtonian fluid material. Designs of calibration plants are shown, the principle of which is based on the method of falling load and the interaction of parallel currents. The results of recording and measuring the pressure of a shock acoustic wave (SAW) generated by an electric explosion of a metal conductor of a ring-shaped geometry in a closed space of conical geometry with a condensed (aqueous) medium are presented. The discharge current and the voltage drop across the exploding flat ring foil (EEFRF) were recorded by the Rogowski belt and voltage divider, respectively. The pressure pulse of the acoustic shock wave was recorded by a piezoelectric pressure transducer. The electrical signals were recorded with a GDS-810 S digital two-beam storage oscilloscope. The amplitude value of pressure was estimated by plastic deformation of the plate sensor in the form of a round thin plate with clamped edges.