ChemInform Abstract: THE DETERMINATION OF THE OXIDATION STATES OF NEPTUNIUM IN SODIUM HYDROXIDE SOLUTIONS BY ADSORPTION ON ZIRCONIUM(IV) HYDROXIDE

1981 ◽  
Vol 12 (2) ◽  
Author(s):  
Y. SHIOKAWA ◽  
A. SATO ◽  
S. SUZUKI
Keyword(s):  
Sodium Hydroxide ◽  
Oxidation States

Determination of subnanogram amounts of sulfur dioxide and sulfites by pneumatopotentiometry

1986 ◽  
Vol 51 (10) ◽  
pp. 2077-2082 ◽  
Author(s):  
Jan Langmaier ◽  
František Opekar
Keyword(s):  
Sulfur Dioxide ◽  
Redox Potential ◽  
Sodium Hydroxide ◽  
Porous Membrane ◽  
Membrane Electrode ◽  
Iodine Monochloride ◽  
Membrane Pores ◽  
Relative Standard ◽  
Limit Of Quantitation

Gold porous membrane electrode has been used for the potentiometric determination of small amounts of sulfur dioxide absorbed in the solutions of sodium tetrachloromercurate or sodium hydroxide. Sulfur dioxide is released by the reaction with an acid into a stream of nitrogen and led to the electrode immersed into the solution of iodine monochloride. Part of SO2 penetrates through the membrane pores into the solution where it is oxidized. The electrode redox potential change is a measure of the SO2 concentration in the absorption solution. In the solution of 1 . 10-5 M[ICl2]- in 0.02 M-HClO4 the limit of quantitation was found to be 0.07 ng SO2 . ml-1. The relative standard deviations of 1.4% and 2.5% were found for the determinations of 10 ng and 0.5 ng of SO2, respectively. Higher concentrations of H2S interfere only in the hydroxide solution. About 10 samples can be analyzed per one hour.

Collaborative Study of the Spectrophotometric Determination of Procainamide Hydrochloride

1976 ◽  
Vol 59 (4) ◽  
pp. 807-810
Author(s):  
Jeffrey C Hamm
Keyword(s):  
Sodium Hydroxide ◽  
Acid Medium ◽  
Spectrophotometric Determination ◽  
Spectrophotometric Method ◽  
Collaborative Study ◽  
Dosage Forms ◽  
Standard Deviations

Abstract The USP analysis for procainamide HCl is titrimetric and relatively nonspecific, capsule and tablet dyes may interfere, and the method is not applicable to coated tablets. In the spectrophotofluorometric method the sample deteriorates when exposed to a xenon source. In the ultraviolet spectrophotometric method reported here, the sample is dispersed in acid medium, possible interferences are extracted in chloroform, base is added, procainamide is extracted in chloroform, the residue is dissolved in sodium hydroxide, and the compound is measured by absorption at 272 nm and comparison with a standard. Recoveries of standards added to capsule, tablet, and injection composites ranged from 99.3 to 102%. Twelve collaborators reported duplicate assay results for all 3 dosage forms with per cent standard deviations for 5 samples ranging from 1.01 to 1.27%. The method has been adopted as official first action.

Determination of chlorine in polypropylene after sodium hydroxide refluxing

1971 ◽  
Vol 53 (1) ◽  
pp. 135-139
Author(s):  
R.J. Nadalin ◽  
M.L. Theodore
Keyword(s):  
Sodium Hydroxide

scholarly journals Development and validation of spectrophotometric method for phenylephrine hydrochloride estimation in nasal drops formulations

2008 ◽  
Vol 27 (2) ◽  
pp. 149 ◽  
Author(s):  
Ivana Savić ◽  
Goran Nikolić ◽  
Vladimir Banković
Keyword(s):  
Standard Deviation ◽  
Sodium Hydroxide ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Phenylephrine Hydrochloride ◽  
Relative Standard ◽  
Development And Validation

Simple, accurate and reproducible UV-spectrophotometric method was developed and validated for the estimation of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. Phenylephrine hydrochloride was estimated at 291 nm in 1 mol⋅dm-3 sodium hydroxide (pH 13.5). Beer’s law was obeyed in the concentration range of 10–100 μg⋅cm−3 (r2 = 0.9990) in the sodium hydroxide medium. The apparent molar absorptivity was found to be 1.63×103 dm3⋅mol−1⋅cm−1. The method was tested and validated for various parameters according to the ICH (International Conference on Harmonization) guidelines. The detection and quantitation limits were found to be 0.892 and 2.969 μg⋅cm−3, respectively. The proposed method was successfully applied for the determination of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. The results demonstrated that the procedure is accurate, precise and reproducible (relative standard deviation < 1 %), while being simple, cheap and less time consuming, and hence can be suitably applied for the estimation of phenylephrine hydrochloride in different dosage forms.

Sign in / Sign up

Export Citation Format

Share Document