Effect of operational parameters on the leaching efficiency and recovery of heavy metals from computer printed circuit boards

2015 ◽  
Vol 91 (7) ◽  
pp. 2038-2046 ◽  
Author(s):  
Suthee Janyasuthiwong ◽  
Riccardo Ugas ◽  
Eldon R Rene ◽  
Carucci Alessandra ◽  
Giovanni Esposito ◽  
...  
2019 ◽  
Vol 134 ◽  
pp. 16-22 ◽  
Author(s):  
Muhammad Arinanda ◽  
Quentin van Haute ◽  
Fanny Lambert ◽  
Stoyan Gaydardzhiev

2019 ◽  
Vol 45 (3) ◽  
pp. 355-362
Author(s):  
Zhenfeng Xiong ◽  
Ying Huang ◽  
Kemei Zhou ◽  
Dong Zhang ◽  
Juan Bao ◽  
...  

Waste printed circuit boards (WPCBs) from personal computers were ground and subjected to a two-step leaching process using two inorganic acids (nitric acid and aqua regia) to leach metals. Three kinds of samples were used: the whole WPCB, the golden finger part, and the WPCB excluding the golden finger. Leaching efficiencies of metals from these samples for different nitric acid concentrations (followed by aqua regia) were evaluated to identify the best concentration of nitric acid. The extracted Au concentration from the golden finger was 5.5 times of that from the whole WPCB board. Metals that compete with Au, such as Ni and Fe, have lower mass fractions in the whole WPCB board compared to those in the golden finger. However, Cu comprises a higher proportion in the golden finger. Au can be effectively separated from most other metals by initially leaching the ground WPCB with 5M nitric acid, followed by leaching with aqua regia. Considering the high leaching proportion of Au, it is advantageous to leach Au and base metals separately from the golden finger and from WPCB excluding the golden finger.


RSC Advances ◽  
2015 ◽  
Vol 5 (44) ◽  
pp. 34921-34926 ◽  
Author(s):  
Mengjun Chen ◽  
Jiqin Wang ◽  
Jinxiu Huang ◽  
Haiyan Chen

The leaching behavior of zinc, representing heavy metals, during the process of recycling copper in typical acidic ionic liquids from waste printed circuit boards was examined and the connection between copper and zinc during the leaching process was investigated in detail.


2019 ◽  
Vol 26 (24) ◽  
pp. 24417-24429 ◽  
Author(s):  
Rasoul Khayyam Nekouei ◽  
Farshid Pahlevani ◽  
Rabeeh Golmohammadzadeh ◽  
Mohammad Assefi ◽  
Ravindra Rajarao ◽  
...  

2014 ◽  
Vol 16 (8) ◽  
pp. 1967-1974 ◽  
Author(s):  
Guo-hua Zhao ◽  
Xing-zhang Luo ◽  
Gui Chen ◽  
Yong-jun Zhao

Printed circuit boards (PCBs) are the main components of electrical and electronic equipment (EEE).


Sign in / Sign up

Export Citation Format

Share Document