Natural Fillers as Potential Modifying Agents for Epoxy Composition: A Review

Epoxy resins as important organic matrices, thanks to their chemical structure and the possibility of modification, have unique properties, which contribute to the fact that these materials have been used in many composite industries for many years. Epoxy resins are repeatedly used in exacting applications due to their exquisite mechanical properties, thermal stability, scratch resistance, and chemical resistance. Moreover, epoxy materials also have really strong resistance to solvents, chemical attacks, and climatic aging. The presented features confirm the fact that there is a constant interest of scientists in the modification of resins and understanding its mechanisms, as well as in the development of these materials to obtain systems with the required properties. Most of the recent studies in the literature are focused on green fillers such as post-agricultural waste powder (cashew nuts powder, coconut shell powder, rice husks, date seed), grass fiber (bamboo fibers), bast/leaf fiber (hemp fibers, banana bark fibers, pineapple leaf), and other natural fibers (waste tea fibers, palm ash) as reinforcement for epoxy resins rather than traditional non-biodegradable fillers due to their sustainability, low cost, wide availability, and the use of waste, which is environmentally friendly. Furthermore, the advantages of natural fillers over traditional fillers are acceptable specific strength and modulus, lightweight, and good biodegradability, which is very desirable nowadays. Therefore, the development and progress of “green products” based on epoxy resin and natural fillers as reinforcements have been increasing. Many uses of natural plant-derived fillers include many plant wastes, such as banana bark, coconut shell, and waste peanut shell, can be found in the literature. Partially biodegradable polymers obtained by using natural fillers and epoxy polymers can successfully reduce the undesirable epoxy and synthetic fiber waste. Additionally, partially biopolymers based on epoxy resins, which will be presented in the paper, are more useful than commercial polymers due to the low cost and improved good thermomechanical properties.

Towards biowastes valorization: Peanut shell as resource for quality chemicals and activated biochar production

The purpose of this work was to transform a regional biowaste into value-added chemicals and products through a modest thermo-catalytic pyrolysis process. ZSM-11 (Zeolite Socony Mobile-11) zeolites modified by nickel (Ni) incorporation (1–8 wt%) were synthesized and characterized by means of X-Ray Diffraction, Inductively Coupled Plasma Atomic Emission Spectroscopy, Infrared Fourier Transform Spectroscopy, UV–Vis Diffuse Reflectance Spectra and Temperature Programmed Reduction. Results demonstrated that Ni was mainly incorporated as oxide. These porous materials were evaluated as heterogeneous catalysts to improve biooil composition. In this sense, higher hydrocarbon yields, and quality chemicals were obtained and oxygenates were diminished. The deactivation of the most active material was studied over six cycles of reaction. In order to achieve the circular bioeconomy postulates, the obtained biochar (usually considered a residue) was further transformed through a physicochemical activation. The obtained activated biochars were extensively characterized.

Sustainable Management of Peanut Shell through Biochar and Its Application as Soil Ameliorant

The current research encompasses utilization of peanut shells (PS) as feedstock for pyrolysis carried out at various temperatures (250, 400, and 550 °C) for deriving biochar, namely PS-BC250, PS-BC400, and PS-BC550. After analyzing the biochar types physicochemically, it was applied as a soil ameliorant for the growth of cucumber. The results showed that in prepared biochar type, bulk density, volatile contents, hydrogen, oxygen, and nitrogen content decreased, whereas pH, electrical conductivity, ash content, fixed carbon content, and surface area increased with the increasing temperature. Scanning electron microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR) presented high porosity, re-orientation of vessels, and a greater number of aromatic compounds, respectively, for PS-BC prepared at 550 °C. On applying PS-BC250, PS-BC400, and PS-BC550 as amendments in potted soil at 2, 4, and 6% (w/w), it improved soil quality (viz pH, ECe, BD, and soil water holding capacity) and increased the yield of cucumber. Because of improved soil properties and crop yield, PS-BC550 at the rate of 4% (w/w) demonstrated a great potential for agricultural application while provisioning dual circular economic indicators in the form of diverting PS waste to an effective alternative of chemical fertilizer having intensive carbon footprints in cucumber production.

Functionalized Porous Nanoscale Fe3O4 Particles Supported Biochar From Peanut Shell For Pb(II) Ions Removal From Landscape Wastewater

The large amounts of heavy metal from landscape wastewater have become serious problems of environmental pollution and risks for human health. It affects the growth of plant and aquatic, and leads to the destruction of landscape. Therefore, the development of efficient novel adsorbent is a very important for treatment of heavy metal. A low-cost and easily obtained agricultural waste (Peanut Shell) was modified by nanoscale Fe3O4 particles. Then, the functionalized porous nanoscale Fe3O4 particles supported biochar from peanut shell (PS-Fe3O4) for removal of Pb(II) ions from aqueous solution was investigated. The characterization of PS-Fe3O4 composites showed that PS from peanut shell was successfully coated with porous nanoscale Fe3O4 particles. The pseudo second-order kinetic model and Langmuir model were more fitted for describing the adsorption process of Pb(II) ions in solution. The maximum adsorption capacity of Pb(II) ions removal in solution by PS-Fe3O4 composites could reach 188.68 mg/g. The adsorption process of Pb(II) ions removal by PS-Fe3O4 composites was a spontaneous and endothermic process. The adsorption mechanisms of Pb(II) ions by PS-Fe3O4 composites were mainly controlled by the chemical adsorption process. They included Fe-O coordination reaction, co-precipitation, complexation reaction and ion exchange. PS-Fe3O4 composites were thought as a low-cost, good regeneration performance and high efficiency adsorption material for removal of Pb(II) ions in solution.