Structural characterization of blends containing both PVDF and natural rubber latex

2005 ◽  
Vol 36 (12) ◽  
pp. 1118-1124 ◽  
Author(s):  
R. D. Simoes ◽  
A. E. Job ◽  
D. L. Chinaglia ◽  
V. Zucolotto ◽  
J. C. Camargo-Filho ◽  
...  
2012 ◽  
Vol 626 ◽  
pp. 523-529 ◽  
Author(s):  
Shamala Ramasamy ◽  
Hanafi Ismail ◽  
Yamuna Munusamy

Rice husk powder (RHP) is an abundant agricultural by product that is produced in bulk quantity as part of rice milling. This research is carried out to incorporate RHP with natural rubber latex (NRL) compound. Different loading of RHP is added to NRL compound and is foamed to make natural rubber latex foam (NRLF) using a well known technique called the Dunlop method. The tensile properties of modified NRLF is studied and compared with the controlled NRLF which has zero RHP loading. The morphology and micro structural characterization has been performed by Tabletop microscopy (TM1000). The tensile strength decreases at 2.5 pphr but increases again as the filler loading increases. Elongation at break decreases whereas modulus at 100% elongation (M 100) and hardness increases as the filler loading increases.


2012 ◽  
Vol 51 (6) ◽  
pp. 605-611 ◽  
Author(s):  
Indrajith Rathnayake ◽  
Hanafi Ismail ◽  
Baharin Azahari ◽  
Nalin Dammika Darsanasiri ◽  
Sanath Rajapakse

Polímeros ◽  
2014 ◽  
Vol 24 (3) ◽  
pp. 283-290 ◽  
Author(s):  
Feiyun Wei ◽  
Heping Yu ◽  
Zongqiang Zeng ◽  
Hongchao Liu ◽  
Qifang Wang ◽  
...  

2014 ◽  
Vol 11 (2) ◽  
pp. 109-115 ◽  
Author(s):  
Sweeta Akbari ◽  
Arun Gupta ◽  
Tanveer Ahmed Khan ◽  
Saidatul Shima Jamari ◽  
Norlirabiatuladawiyah Binti Che Ani ◽  
...  

2012 ◽  
Vol 31 (5) ◽  
pp. 586-592 ◽  
Author(s):  
W.G.I.U. Rathnayake ◽  
H. Ismail ◽  
A. Baharin ◽  
A.G.N.D. Darsanasiri ◽  
Sanath Rajapakse

2008 ◽  
Vol 286 (8-9) ◽  
pp. 1049-1059 ◽  
Author(s):  
A. Bogner ◽  
A. Guimarães ◽  
R. C. O. Guimarães ◽  
A. M. Santos ◽  
G. Thollet ◽  
...  

2013 ◽  
Vol 712-715 ◽  
pp. 111-114 ◽  
Author(s):  
Tian Ming Gao ◽  
Mao Fang Huang ◽  
Rui Hong Xie ◽  
Hong Lian Chen

Surface modified nanocrystalline cellulose (NCC) was prepared by silicon-69, and then blended into natural rubber latex to prepare nanocomposites. The nanocomposites properties of tensile properties, tear strength, morphology and thermal dynamic mechanical properties were measured by mechanical property testing, scanning electron microscopy (SEM), and dynamic mechanical analysis (DMA), respectively. The results showed that modified NCC is homogeneously distributed throughout NR matrix, which leads to the enhancement on mechanical properties. Moreover, the storage modulus (E) of modified nanocellulose filled NR is higher than unmodified nanocellulose filled NR, and the tanδ is reversed.


Sign in / Sign up

Export Citation Format

Share Document