Large-Eddy Simulations of an Oblique Shock Impinging on a Turbulent Boundary Layer: Effect of the Spanwise Confinement on the Low-Frequency Oscillations

2010 ◽  
pp. 361-367 ◽  
Author(s):  
Emile Touber ◽  
Neil D. Sandham
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Low Frequency ◽  
Oblique Shock ◽  
Large Eddy Simulations ◽  
Boundary Layer Effect ◽  
Low Frequency Oscillations ◽  
Large Eddy ◽  
Layer Effect

Large Eddy Simulations on Fan Shaped Film Cooling Hole with Upstream Boundary Layer Turbulence Effect Generated by Trip Strip

2021 ◽  
pp. 1-37
Author(s):  
Young Seok Kang ◽  
Sangook Jun ◽  
Dong-Ho Rhee
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Film Cooling ◽  
Main Flow ◽  
Large Eddy Simulations ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Cooling Flow ◽  
Large Eddy ◽  
Cooling Hole

Abstract Large eddy simulations on the well-known 7-7-7 fan shaped cooling hole were carried out. Like using a trip strip to create turbulent boundary layer in practical experiments, trip strips with different configurations were placed upstream of the cooling hole to investigate incoming turbulent boundary layer effect on the film cooling flow behavior. Without the trip, horseshoe vortex generated by laminar boundary layer induced laterally discharging cooling flow in the lateral direction. Meanwhile, the induced cooling flow formed high film cooling effectiveness region around the film cooling hole. When the incoming boundary flow was turbulent, laterally discharged cooling flow was influenced by the turbulent boundary layer to dissipate to the main flow and resultant high effectiveness region disappeared. Depending on the trip configuration, quantitative characteristics of boundary layer such as turbulent intensity, momentum thickness and shape factor were strongly affected. Some trip configurations resulted in fully developed turbulent boundary layer just before leading edge of the film cooling hole. In such cases, distribution of the film cooling effectiveness showed a reasonable agreement with available experimental data where the quantitative properties of the turbulent boundary layer were similar. However, when the trip was located too close to the film cooling hole, the separated and reattached flow did not develop into the stabilized turbulent boundary layer. Then strong turbulence intensity in the main flow boundary layer stimulated break down of the cooling flow vortex structure and early dissipation to the main flow. It resulted in restricted film cooling flow coverage.

High-Pass Filtered Eddy-Viscosity Models for Large-Eddy Simulations of Compressible Wall-Bounded Flows

2004 ◽  
Author(s):  
Steffen Stolz
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Eddy Viscosity ◽  
Large Eddy Simulations ◽  
Scale Model ◽  
Subgrid Scale ◽  
Smagorinsky Model ◽  
Viscosity Models ◽  
Large Eddy ◽  
High Pass

Eddy-viscosity models such as the Smagorinsky model [1] are the most often employed subgrid-scale (SGS) models for large-eddy simulations (LES). However, for a correct prediction of the viscous sublayer of wall-bounded turbulent flows van-Driest wall damping functions or a dynamic determination of the constant [2] have to be employed. Alternatively, high-pass filtered (HPF) quantities can be used instead of the full velocity field for the computation of the subgrid-scale model terms. This approach has been independently proposed by Vreman [3] and Stolz et al. [4]. In this contribution we consider LES of a spatially developing supersonic turbulent boundary layer at a Mach number of 2.5 and momentum-thickness Reynolds numbers at inflow of approximately 4500, using the HPF Smagorinsky model. The model is supplemented by a HPF eddy-diffusivity ansatz for the SGS heat flux in the energy equation. Turbulent inflow conditions are generated by a rescaling and recycling technique proposed by [5] where the mean and fluctuating part of the turbulent boundary layer at some distance downstream of inflow is rescaled and reintroduced at inflow.

Large-Eddy Simulations of Longitudinal Vortices Embedded in a Turbulent Boundary Layer

AIAA Journal ◽  
2006 ◽  
Vol 44 (12) ◽  
pp. 3032-3039 ◽  
Author(s):  
Donghyun You ◽  
Meng Wang ◽  
Rajat Mittal ◽  
Parviz Moin
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Large Eddy Simulations ◽  
Longitudinal Vortices ◽  
Large Eddy
Sign in / Sign up

Export Citation Format

Share Document