scholarly journals Nanostructure development in multilayered polymer systems as revealed by X-ray scattering methods

2005 ◽  
pp. 140-148
Author(s):  
Francisco J. Baltá. Calleja ◽  
Fernando Ania ◽  
Inés Puente Orench ◽  
Eric Baer ◽  
Anne Hiltner ◽  
...  
Keyword(s):  
Polymer Systems ◽  
X Ray ◽  
X Ray Scattering ◽  
Ray Scattering

scholarly journals Mixed-flow design for microfluidic printing of two-component polymer semiconductor systems

2020 ◽  
Vol 117 (30) ◽  
pp. 17551-17557 ◽  
Author(s):  
Gang Wang ◽  
Liang-Wen Feng ◽  
Wei Huang ◽  
Subhrangsu Mukherjee ◽  
Yao Chen ◽  
...  
Keyword(s):  
Solar Cells ◽  
Short Circuit ◽  
Flow Simulation ◽  
Mixed Flow ◽  
Polymer Systems ◽  
Phase Purity ◽  
X Ray ◽  
X Ray Scattering ◽  
Two Component ◽  
Ray Scattering

The rational creation of two-component conjugated polymer systems with high levels of phase purity in each component is challenging but crucial for realizing printed soft-matter electronics. Here, we report a mixed-flow microfluidic printing (MFMP) approach for two-componentπ-polymer systems that significantly elevates phase purity in bulk-heterojunction solar cells and thin-film transistors. MFMP integrates laminar and extensional flows using a specially microstructured shear blade, designed with fluid flow simulation tools to tune the flow patterns and induce shear, stretch, and pushout effects. This optimizes polymer conformation and semiconducting blend order as assessed by atomic force microscopy (AFM), transmission electron microscopy (TEM), grazing incidence wide-angle X-ray scattering (GIWAXS), resonant soft X-ray scattering (R-SoXS), photovoltaic response, and field effect mobility. For printed all-polymer (poly[(5,6-difluoro-2-octyl-2H-benzotriazole-4,7-diyl)-2,5-thiophenediyl[4,8-bis[5-(2-hexyldecyl)-2-thienyl]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl]-2,5-thiophenediyl]) [J51]:(poly{[N,N′-bis(2-octyldodecyl)naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5′-(2,2′-bithiophene)}) [N2200]) solar cells, this approach enhances short-circuit currents and fill factors, with power conversion efficiency increasing from 5.20% for conventional blade coating to 7.80% for MFMP. Moreover, the performance of mixed polymer ambipolar [poly(3-hexylthiophene-2,5-diyl) (P3HT):N2200] and semiconducting:insulating polymer unipolar (N2200:polystyrene) transistors is similarly enhanced, underscoring versatility for two-componentπ-polymer systems. Mixed-flow designs offer modalities for achieving high-performance organic optoelectronics via innovative printing methodologies.

Small-Angle X-Ray Scattering of Polymer Systems

2013 ◽  
pp. 391-407 ◽  
Author(s):  
Carlos A. Avila-Orta ◽  
Francisco J. Medellín-Rodríguez
Keyword(s):  
Small Angle ◽  
Polymer Systems ◽  
X Ray ◽  
X Ray Scattering ◽  
Ray Scattering

Microtubule nucleation sequence studied by time-resolved x-ray scattering and electron microscopy

1983 ◽  
Vol 41 ◽  
pp. 766-767
Author(s):  
Eva-Maria Mandelkow ◽  
Eckhard Mandelkow ◽  
Joan Bordas
Keyword(s):  
Electron Microscopy ◽  
Dynamic Equilibrium ◽  
Time Resolved ◽  
X Ray ◽  
Additional Information ◽  
X Ray Scattering ◽  
Low Concentrations ◽  
Microtubule Growth ◽  
Ray Patterns ◽  
Ray Scattering

When a solution of microtubule protein is changed from non-polymerising to polymerising conditions (e.g. by temperature jump or mixing with GTP) there is a series of structural transitions preceding microtubule growth. These have been detected by time-resolved X-ray scattering using synchrotron radiation, and they may be classified into pre-nucleation and nucleation events. X-ray patterns are good indicators for the average behavior of the particles in solution, but they are difficult to interpret unless additional information on their structure is available. We therefore studied the assembly process by electron microscopy under conditions approaching those of the X-ray experiment. There are two difficulties in the EM approach: One is that the particles important for assembly are usually small and not very regular and therefore tend to be overlooked. Secondly EM specimens require low concentrations which favor disassembly of the particles one wants to observe since there is a dynamic equilibrium between polymers and subunits.

Time-Resolved Cryo-Electron Microscopy of Oscillating Microtubules

1990 ◽  
Vol 48 (1) ◽  
pp. 502-503
Author(s):  
Eva-Maria Mandelkow ◽  
Ron Milligan
Keyword(s):  
Electron Microscopy ◽  
Dynamic Instability ◽  
Entire Solution ◽  
Reaction Scheme ◽  
Time Resolved ◽  
X Ray ◽  
X Ray Scattering ◽  
A Chain ◽  
Ray Scattering

Microtubules form part of the cytoskeleton of eukaryotic cells. They are hollow libers of about 25 nm diameter made up of 13 protofilaments, each of which consists of a chain of heterodimers of α-and β-tubulin. Microtubules can be assembled in vitro at 37°C in the presence of GTP which is hydrolyzed during the reaction, and they are disassembled at 4°C. In contrast to most other polymers microtubules show the behavior of “dynamic instability”, i.e. they can switch between phases of growth and phases of shrinkage, even at an overall steady state [1]. In certain conditions an entire solution can be synchronized, leading to autonomous oscillations in the degree of assembly which can be observed by X-ray scattering (Fig. 1), light scattering, or electron microscopy [2-5]. In addition such solutions are capable of generating spontaneous spatial patterns [6].In an earlier study we have analyzed the structure of microtubules and their cold-induced disassembly by cryo-EM [7]. One result was that disassembly takes place by loss of protofilament fragments (tubulin oligomers) which fray apart at the microtubule ends. We also looked at microtubule oscillations by time-resolved X-ray scattering and proposed a reaction scheme [4] which involves a cyclic interconversion of tubulin, microtubules, and oligomers (Fig. 2). The present study was undertaken to answer two questions: (a) What is the nature of the oscillations as seen by time-resolved cryo-EM? (b) Do microtubules disassemble by fraying protofilament fragments during oscillations at 37°C?

X-ray scattering by 1D molecular Guinier-Preston zones in ordered smectic phases

1992 ◽  
Vol 2 (6) ◽  
pp. 899-913 ◽  
Author(s):  
Patrick Davidson ◽  
Elisabeth Dubois-Violette ◽  
Anne-Marie Levelut ◽  
Brigitte Pansu
Keyword(s):  
X Ray ◽  
X Ray Scattering ◽  
Smectic Phases ◽  
Ray Scattering

An X-ray Scattering Study of Laterally Modulated Structures: Investigation of Coherence and Resolution Effects with a Grating

1996 ◽  
Vol 6 (8) ◽  
pp. 1085-1094 ◽  
Author(s):  
A. Gibaud ◽  
J. Wang ◽  
M. Tolan ◽  
G. Vignaud ◽  
S. K. Sinha
Keyword(s):  
X Ray ◽  
X Ray Scattering ◽  
Modulated Structures ◽  
Scattering Study ◽  
Ray Scattering
Sign in / Sign up

Export Citation Format

Share Document