In this paper the influence of the shaper parameters on the characteristics of acceleration pulses (peak value and duration) reproduced on mechatronic shock machines is analyzed. A comparison of the acceleration pulses obtained experimentally and by computational methods is presented. Recommendations for clarifying the requirements for methodological calculations of pulse parameters are given. The dependence of the elastic force of the shock pulse shaper on its deformation is presented. The influence of this characteristic on the peak value and duration of the acceleration pulse is estimated. The influence of the height of the shaper on the parameters of the acceleration pulses is analyzed. The concept of a device that allows you to automatically change the height of the shaper to obtain a wider range of acceleration pulses is presented. The interaction of the shock table with the shaper by means of computer modeling is modelled. Conclusions about the dependences of the duration and peak value of the acceleration pulses on the parameters of the shaper (stiffness and height) are drawn. Recommendations for selecting the parameters of the shaper to obtain acceleration pulses with the desired parameters are given.
Influence of the shaper parameters on the characteristics of acceleration pulses reproduced by mechatronic shock machines
