Development of RSM- and ANN-based models to predict and analyze the effects of process parameters of laser-hardened commercially pure titanium on heat input and tensile strength

2012 ◽  
Vol 65 (9-12) ◽  
pp. 1319-1338 ◽  
Author(s):  
Duradundi Sawant Badkar ◽  
Krishna Shankar Pandey ◽  
G. Buvanashekaran
Keyword(s):  
Tensile Strength ◽  
Process Parameters ◽  
Heat Input ◽  
Pure Titanium ◽  
Commercially Pure Titanium ◽  
Commercially Pure

scholarly journals Tensile and Flexural Strength of Commercially Pure Titanium Submitted to Laser and Tungsten Inert Gas Welds

2013 ◽  
Vol 24 (6) ◽  
pp. 630-634 ◽  
Author(s):  
Juliana Abdallah Atoui ◽  
Daniela Nair Borges Felipucci ◽  
Valeria Oliveira Pagnano ◽  
Iara Augusta Orsi ◽  
Mauro Antonio de Arruda Nobilo ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Flexural Strength ◽  
Laser Welding ◽  
Pure Titanium ◽  
Strength Test ◽  
Inert Gas ◽  
Commercially Pure Titanium ◽  
Middle Point ◽  
Strength Data ◽  
Commercially Pure

This study evaluated the tensile and flexural strength of tungsten inert gas (TIG) welds in specimens made of commercially pure titanium (CP Ti) compared with laser welds. Sixty cylindrical specimens (2 mm diameter x 55 mm thick) were randomly assigned to 3 groups for each test (n=10): no welding (control), TIG welding (10 V, 36 A, 8 s) and Nd:YAG laser welding (380 V, 8 ms). The specimens were radiographed and subjected to tensile and flexural strength tests at a crosshead speed of 1.0 mm/min using a load cell of 500 kgf applied on the welded interface or at the middle point of the non-welded specimens. Tensile strength data were analyzed by ANOVA and Tukey's test, and flexural strength data by the Kruskal-Wallis test (α=0.05). Non-welded specimens presented significantly higher tensile strength (control=605.84±19.83) (p=0.015) and flexural strength (control=1908.75) (p=0.000) than TIG- and laser-welded ones. There were no significant differences (p>0.05) between the welding types for neither the tensile strength test (TIG=514.90±37.76; laser=515.85±62.07) nor the flexural strength test (TIG=1559.66; laser=1621.64). As far as tensile and flexural strengths are concerned, TIG was similar to laser and could be suitable to replace laser welding in implant-supported rehabilitations.

Sign in / Sign up

Export Citation Format

Share Document