Generalized rational Bézier curves for the rigid body motion design

2015 ◽  
Vol 32 (9) ◽  
pp. 1071-1084 ◽  
Author(s):  
Zhongxuan Luo ◽  
Qian Wang ◽  
Xin Fan ◽  
Yaqi Gao ◽  
Panpan Shui
Keyword(s):  
Rigid Body ◽  
Rigid Body Motion ◽  
Body Motion ◽  
Bezier Curves ◽  
Bézier Curves ◽  
Rational Bézier Curves ◽  
Motion Design

A planar reconfigurable linear rigid-body motion linkage with two operation modes

2014 ◽  
Vol 228 (16) ◽  
pp. 2985-2991 ◽  
Author(s):  
Guangbo Hao ◽  
Xianwen Kong ◽  
Xiuyun He
Keyword(s):  
Rigid Body ◽  
Single Mode ◽  
Rigid Body Motion ◽  
Body Motion ◽  
Reference Guide ◽  
Revolute Joints ◽  
Operation Modes ◽  
Straight Line ◽  
Motion Stage ◽  
Motion Mode

A planar reconfigurable linear (also rectilinear) rigid-body motion linkage (RLRBML) with two operation modes, that is, linear rigid-body motion mode and lockup mode, is presented using only R (revolute) joints. The RLRBML does not require disassembly and external intervention to implement multi-task requirements. It is created via combining a Robert’s linkage and a double parallelogram linkage (with equal lengths of rocker links) arranged in parallel, which can convert a limited circular motion to a linear rigid-body motion without any reference guide way. This linear rigid-body motion is achieved since the double parallelogram linkage can guarantee the translation of the motion stage, and Robert’s linkage ensures the approximate straight line motion of its pivot joint connecting to the double parallelogram linkage. This novel RLRBML is under the linear rigid-body motion mode if the four rocker links in the double parallelogram linkage are not parallel. The motion stage is in the lockup mode if all of the four rocker links in the double parallelogram linkage are kept parallel in a tilted position (but the inner/outer two rocker links are still parallel). In the lockup mode, the motion stage of the RLRBML is prohibited from moving even under power off, but the double parallelogram linkage is still moveable for its own rotation application. It is noted that further RLRBMLs can be obtained from the above RLRBML by replacing Robert’s linkage with any other straight line motion linkage (such as Watt’s linkage). Additionally, a compact RLRBML and two single-mode linear rigid-body motion linkages are presented.

Polynomial approximation of rational Bézier curves with constraints

2011 ◽  
Vol 59 (4) ◽  
pp. 607-622 ◽  
Author(s):  
Stanisław Lewanowicz ◽  
Paweł Woźny ◽  
Paweł Keller
Keyword(s):  
Polynomial Approximation ◽  
Bezier Curves ◽  
Bézier Curves ◽  
Rational Bézier Curves

Bézier Curves on Riemannian Manifolds and Lie Groups With Kinematics Applications

1994 ◽  
Author(s):  
Frank C. Park ◽  
Bahram Ravani
Keyword(s):  
Riemannian Manifold ◽  
Rigid Body ◽  
Lie Groups ◽  
Riemannian Manifolds ◽  
Group Structure ◽  
Recursive Algorithm ◽  
Bezier Curves ◽  
Bézier Curves ◽  
Spatial Displacements ◽  
Natural Way

Abstract In this article we generalize the concept of Bézier curves to curved spaces, and illustrate this generalization with an application in kinematics. We show how De Casteljau’s algorithm for constructing Bézier curves can be extended in a natural way to Riemannian manifolds. We then consider a special class of Riemannian manifold, the Lie groups. Because of their algebraic group structure Lie groups admit an elegant, efficient recursive algorithm for constructing Bézier curves. Spatial displacements of a rigid body also form a Lie group, and can therefore be interpolated (in the Bezier sense) using this recursive algorithm. We apply this algorithm to the kinematic problem of trajectory generation or motion interpolation for a moving rigid body.

Computation of Nonlinear Response of Hydraulically Actuated Structures

1997 ◽  
Author(s):  
T. D. Burton ◽  
C. P. Baker ◽  
J. Y. Lew
Keyword(s):  
Rigid Body ◽  
Flexible Structures ◽  
Rigid Body Motion ◽  
Body Motion ◽  
Flexible Beam ◽  
Test Bed ◽  
Ode Models ◽  
Hydraulically Actuated ◽  
Pressure Dynamics ◽  
Low Order

Abstract The maneuvering and motion control of large flexible structures are often performed hydraulically. The pressure dynamics of the hydraulic subsystem and the rigid body and vibrational dynamics of the structure are fully coupled. The hydraulic subsystem pressure dynamics are strongly nonlinear, with the servovalve opening x(t) providing a parametric excitation. The rigid body and/or flexible body motions may be nonlinear as well. In order to obtain accurate ODE models of the pressure dynamics, hydraulic fluid compressibility must generally be taken into account, and this results in system ODE models which can be very stiff (even if a low order Galerkin-vibration model is used). In addition, the dependence of the pressure derivatives on the square root of pressure results in a “faster than exponential” behavior as certain limiting pressure values are approached, and this may cause further problems in the numerics, including instability. The purpose of this paper is to present an efficient strategy for numerical simulation of the response of this type of system. The main results are the following: 1) If the system has no rigid body modes and is thus “self-centered,” that is, there exists an inherent stiffening effect which tends to push the motion to a stable static equilibrium, then linearized models of the pressure dynamics work well, even for relatively large pressure excursions. This result, enabling linear system theory to be used, appears of value for design and optimization work; 2) If the system possesses a rigid body mode and is thus “non-centered,” i.e., there is no stiffness element restraining rigid body motion, then typically linearization does not work. We have, however discovered an artifice which can be introduced into the ODE model to alleviate the stiffness/instability problems; 3) in some situations an incompressible model can be used effectively to simulate quasi-steady pressure fluctuations (with care!). In addition to the aforementioned simulation aspects, we will present comparisons of the theoretical behavior with experimental histories of pressures, rigid body motion, and vibrational motion measured for the Battelle dynamics/controls test bed system: a hydraulically actuated system consisting of a long flexible beam with end mass, mounted on a hub which is rotated hydraulically. The low order ODE models predict most aspects of behavior accurately.

Structures of the Phosphazenes [ClC(NPCl3)2]+PCl6 − and [CH3C(NPCl3)2]+SbCl6 − at 90 K

1997 ◽  
Vol 53 (6) ◽  
pp. 953-960 ◽  
Author(s):  
F. Belaj
Keyword(s):  
Rigid Body ◽  
Motion Analysis ◽  
Rigid Body Motion ◽  
Body Motion ◽  
Torsion Angles ◽  
Ionic Compounds ◽  
Intramolecular Motions

The asymmetric units of both ionic compounds [N-(chloroformimidoyl)phosphorimidic trichloridato]trichlorophosphorus hexachlorophosphate, [ClC(NPCl3)2]+PCl^{-}_{6} (1), and [N-(acetimidoyl)phosphorimidic trichloridato]trichlorophosphorus hexachloroantimonate, [CH3C(NPCl3)2]+SbCl^{-}_{6} (2), contain two formula units with the atoms located on general positions. All the cations show cis–trans conformations with respect to their X—C—N—P torsion angles [X = Cl for (1), C for (2)], but quite different conformations with respect to their C—N—P—Cl torsion angles. Therefore, the two NPCl3 groups of a cation are inequivalent, even though they are equivalent in solution. The very flexible C—N—P angles ranging from 120.6 (3) to 140.9 (3)° can be attributed to the intramolecular Cl...Cl and Cl...N contacts. A widening of the C—N—P angles correlates with a shortening of the P—N distances. The rigid-body motion analysis shows that the non-rigid intramolecular motions in the cations cannot be explained by allowance for intramolecular torsion of the three rigid subunits about specific bonds.

Sign in / Sign up

Export Citation Format

Share Document