Differences in patellofemoral contact stresses between mobile-bearing and fixed-bearing total knee arthroplasties: a dynamic in vitro measurement

2008 ◽  
Vol 129 (7) ◽  
pp. 901-907 ◽  
Author(s):  
Adrian Skwara ◽  
Carsten O. Tibesku ◽  
Sven Ostermeier ◽  
Christina Stukenborg-Colsman ◽  
Susanne Fuchs-Winkelmann
2015 ◽  
Vol 3 (2) ◽  
Author(s):  
Burak Kaymaz ◽  
Cihan Sevinçhan ◽  
Umut Hatay Gölge ◽  
Gurdal Nusran ◽  
Ferdi Göksel ◽  
...  

2009 ◽  
Vol 32 (4) ◽  
pp. 213-223 ◽  
Author(s):  
Thomas M. Grupp ◽  
Dave Stulberg ◽  
Christian Kaddick ◽  
Allan Maas ◽  
Bernhard Fritz ◽  
...  

The objective of our study was to evaluate the in vitro wear behavior of fixed bearing designs for total knee arthroplasty in relation to contact mechanics and resultant kinematics for different degrees of congruency. A finite element model was created for three knee articulations with increasing degrees of tibio-femoral congruency (flat, curved, and dished design). For the three different knee design configurations, in vitro wear simulation was performed according to ISO 14243–1. Contact areas increased with increasing knee congruency, whereas the peak surface contact stresses decreased. The wear rates for the knee design configurations differed substantially between the three test groups (flat, curved, and dished). Our observations demonstrate that increased congruency in conjunction with decreased surface contact stresses significantly contributes to reducing wear in fixed bearing knee articulations.


2005 ◽  
Vol &NA; (432) ◽  
pp. 204-209 ◽  
Author(s):  
J L Rees ◽  
D J Beard ◽  
A J Price ◽  
H S Gill ◽  
P McLardy-Smith ◽  
...  

2018 ◽  
Vol 100-B (10) ◽  
pp. 1336-1344 ◽  
Author(s):  
A. J. Powell ◽  
E. Crua ◽  
B. C. Chong ◽  
R. Gordon ◽  
A. McAuslan ◽  
...  

Aims This study compares the PFC total knee arthroplasty (TKA) system in a prospective randomized control trial (RCT) of the mobile-bearing rotating-platform (RP) TKA against the fixed-bearing (FB) TKA. This is the largest RCT with the longest follow-up where cruciate-retaining PFC total knee arthroplasties are compared in a non-bilateral TKA study. Patients and Methods A total of 167 patients (190 knees with 23 bilateral cases), were recruited prospectively and randomly assigned, with 91 knees receiving the RP and 99 knees receiving FB. The mean age was 65.5 years (48 to 82), the mean body mass index (BMI) was 29.7 kg/m2 (20 to 52) and 73 patients were female. The Knee Society Score (KSS), Knee Society Functional Score (KSFS), Oxford Knee Score (OKS), Western Ontario and McMaster Universities Arthritis Index (WOMAC), and 12-Item Short-Form Health Survey Physical and Mental Component Scores (SF-12 PCS, SF-12 MCS) were gathered and recorded preoperatively, at five-years’ follow-up, and at ten years’ follow-up. Additionally, Knee Injury and Osteoarthritis Outcome Scores (KOOS) were collected at five- and ten-year follow-ups. The prevalence of radiolucent lines (RL) on radiographs and implant survival were recorded at five- and ten-year follow-ups. Results At the ten-year follow-up, the RP group (n = 39) had a statistically significant superior score in the OKS (p = 0.001), WOMAC (p = 0.023), SF-12 PCS (p = 0.019), KOOS Activities of Daily Living (ADL) (p = 0.010), and KOOS Sport and Recreation (Sport/Rec) (p = 0.006) compared with the FB group (n = 46). The OKS, SF-12 PCS, and KOOS Sport/Rec at ten years had mean scores above the minimal clinically important difference (MCID) threshold. There was no significant difference in prevalence of radiolucency between groups at five-years’ follow-up (p = 0.449), nor at ten-years’ follow-up (p = 0.08). Implant survival rate at 14 years postoperative was 95.2 (95% CI 90.7 to 99.8) and 94.7 (95% CI 86.8 to 100.0) for the RP and FB TKAs, respectively. Conclusion At ten-year follow-up, the mobile-bearing knee joint arthroplasty had statistically and clinically relevant superior OKS, SF-12 PCS, and KOOS (Sport/Rec) than the fixed-bearing platform. No difference was seen in prevalence of radiolucent lines. There was a greater than 94% implant survival rate for both cohorts at 14 years. Cite this article: Bone Joint J 2018;100-B:1336–44.


Author(s):  
Rohan M. Bhalekar ◽  
Matthew E. Nargol ◽  
Nish Shyam ◽  
Antoni V. F. Nargol ◽  
Stephen R. Wells ◽  
...  

Aims The aim of this study was to investigate whether wear and backside deformation of polyethylene (PE) tibial inserts may influence the cement cover of tibial trays of explanted total knee arthroplasties (TKAs). Methods At our retrieval centre, we measured changes in the wear and deformation of PE inserts using coordinate measuring machines and light microscopy. The amount of cement cover on the backside of tibial trays was quantified as a percentage of the total surface. The study involved data from the explanted fixed-bearing components of four widely used contemporary designs of TKA (Attune, NexGen, Press Fit Condylar (PFC), and Triathlon), revised for any indication, and we compared them with components that used previous generations of PE. Regression modelling was used to identify variables related to the amount of cement cover on the retrieved trays. Results A total of 114 explanted fixed-bearing TKAs were examined. This included 76 used with contemporary PE inserts which were compared with 15 used with older generation PEs. The Attune and NexGen (central locking) trays were found to have significantly less cement cover than Triathlon and PFC trays (peripheral locking group) (p = 0.001). The median planicity values of the PE inserts used with central locking trays were significantly greater than of those with peripheral locking inserts (205 vs 85 microns; p < 0.001). Attune and NexGen inserts had a characteristic pattern of backside deformation, with the outer edges of the PE deviating inferiorly, leaving the PE margins as the primary areas of articulation. Conclusion Explanted TKAs with central locking mechanisms were significantly more likely to debond from the cement mantle. The PE inserts of these designs showed characteristic patterns of deformation, which appeared to relate to the manufacturing process and may be exacerbated in vivo. This pattern of deformation was associated with PE wear occurring at the outer edges of the articulation, potentially increasing the frictional torque generated at this interface.


Sign in / Sign up

Export Citation Format

Share Document