Cloud Point Extraction Preconcentration of Trace Cadmium as 1-Phenyl-3-methyl-4-benzoyl-5-pyrazolone Complex and Determination by Flame Atomic Absorption Spectrometry

2005 ◽  
Vol 152 (1-2) ◽  
pp. 47-51 ◽  
Author(s):  
Pei Liang ◽  
Jing Li ◽  
Xiaoying Yang
Keyword(s):  
Atomic Absorption Spectrometry ◽  
Atomic Absorption ◽  
Cloud Point ◽  
Flame Atomic Absorption Spectrometry ◽  
Cloud Point Extraction ◽  
Absorption Spectrometry ◽  
Flame Atomic Absorption ◽  
Trace Cadmium ◽  
Extraction Preconcentration

Cloud point extraction–flame atomic absorption spectrometry method for preconcentration and determination of trace cadmium in water samples

2014 ◽  
Vol 70 (4) ◽  
pp. 605-611 ◽  
Author(s):  
Jinyan Ning ◽  
Yang Jiao ◽  
Jiao Zhao ◽  
Lifen Meng ◽  
Yaling Yang
Keyword(s):  
Atomic Absorption Spectrometry ◽  
Atomic Absorption ◽  
Cloud Point ◽  
Flame Atomic Absorption Spectrometry ◽  
Water Samples ◽  
Cloud Point Extraction ◽  
Absorption Spectrometry ◽  
Flame Atomic Absorption ◽  
Relative Standard ◽  
Trace Cadmium

A method based on cloud point extraction (CPE) separation/preconcentration of trace cadmium (Cd) as a prior step to its determination by flame atomic absorption spectrometry has been developed. Cadmium reacted with 8-hydroxyquinoline to form hydrophobic chelates, which were extracted into the micelles of nonionic surfactant oligoethylene glycol monoalkyl ether (Genapol X-080) in an alkaline medium. Octanol was used to depress the cloud point of Genapol X-080 in the extraction process. The chemical variables that affect the CPE, such as pH of complexation reaction, amount of chelating agent, Genapol X-080 and octanol were evaluated and optimized. Under optimized conditions, linearity was obeyed in the range of 10–500 μg/L, with the correlation coefficient of 0.9993. For 5 mL of sample solution, the enhancement factor was about 20. The limit of detection and limit of quantification of the method were 0.21 and 0.63 μg/L, respectively. The relative standard deviations (n = 6) was 3.2% for a solution containing 100 μg/L of Cd. The accuracy of the preconcentration system was evaluated by recovery measurements on spiked water samples. Recoveries of spiked samples varied in the range of 94.1–103.8%.

scholarly journals MICELLE-MEDIATED EXTRACTION AS A TOOL FOR SEPARATION AND PRECONCENTRATION IN COPPER ANALYSIS

2010 ◽  
Vol 7 (3) ◽  
pp. 278-283
Author(s):  
F. Ahmadia ◽  
A. Khanmohammadi ◽  
A. Malekpour
Keyword(s):  
Atomic Absorption Spectrometry ◽  
Atomic Absorption ◽  
Cloud Point ◽  
Flame Atomic Absorption Spectrometry ◽  
Cloud Point Extraction ◽  
Absorption Spectrometry ◽  
Hno3 Solution ◽  
Flame Atomic Absorption ◽  
Separation And Preconcentration ◽  
Triton X

A cloud point extraction method was presented for preconcentration of copper in various samples. After complexation with 4-Amino-2,3-dimethyl-1-phenyl-3-pyrazoline-5-one (ADPP) or N-Benzoyl-N-phenylhydroxylamine (BPA)  in water, analyte ions are quantitatively extracted to the phase rich in Triton X-114 after centrifugation. 2.0 mol L-1 HNO3 solution in methanol was added to the surfactant-rich phase prior to its analysis by flame atomic absorption spectrometry (FAAS). The adopted concentrations for ADPP, Triton X-114, HNO3 and parameters such as bath temperature, centrifuge rate and time were optimized. Detection limits (3SDb/m) of 1.3 and 1.9 ng mL-1 for ADPP and BPA along with enrichment factors of 30 and 38 for ADPP and BPA were achieved. The high efficiency of cloud point extraction to carry out the determination of analyte in complex matrices was demonstrated. The proposed method was applied to the analysis of biological, industrial, natural and wastewater, soil and blood samples.   Keywords: 4-Amino-2,3-dimethyl-1-phenyl-3-pyrazoline-5-one (ADPP), N-Benzoyl-N-phenylhydroxylamine (BPA) ,   Cloud Point Extraction, Triton X-114, Flame Atomic Absorption Spectrometry.

Sign in / Sign up

Export Citation Format

Share Document