The Mercury Gamma-Ray and Neutron Spectrometer (MGNS) Onboard the Mercury Planetary Orbiter of the BepiColombo Mission: Design Updates and First Measurements in Space

2021 ◽  
Vol 217 (5) ◽  
Author(s):  
I. G. Mitrofanov ◽  
A. S. Kozyrev ◽  
D. I. Lisov ◽  
M. L. Litvak ◽  
A. A. Malakhov ◽  
...  
2007 ◽  
Vol 131 (1-4) ◽  
pp. 339-391 ◽  
Author(s):  
John O. Goldsten ◽  
Edgar A. Rhodes ◽  
William V. Boynton ◽  
William C. Feldman ◽  
David J. Lawrence ◽  
...  

2007 ◽  
pp. 339-391
Author(s):  
John O. Goldsten ◽  
Edgar A. Rhodes ◽  
William V. Boynton ◽  
William C. Feldman ◽  
David J. Lawrence ◽  
...  

2016 ◽  
Author(s):  
S. K. Goyal ◽  
D. Banerjee ◽  
S. Vadawale ◽  
Dipak K. Panda ◽  
A. R. Patel ◽  
...  

2021 ◽  
Author(s):  
Johannes Benkhoff ◽  
Joe Zender ◽  
Go Murakami ◽  
Elsa Montagnon

<p>BepiColombo was launched on 20 October 2018 from the European spaceport Kourou in French Guyana and is now on route to Mercury to unveil Mercury’s secrets. BepiColombo a joint project between the European Space Agency (ESA) and the Japanese Aerospace Exploration Agency (JAXA) consists of two orbiters, the Mercury Planetary Orbiter (MPO) and the Mercury Magnetospheric Orbiter (Mio). It will perform measurements to increase our knowledge on the fundamental questions about Mercury’s evolution, composition, interior, magnetosphere, and exosphere.  </p><p>During its 7-year long journey to the innermost terrestrial planet Mio and MPO are connected to each on-top of the Mercury Transfer Module (MTM). The MTM contains a solar electric propulsion engine and will bring the two spacecraft to Mercury. In late 2025, this ‘stack’ configuration is abandoned, the MTM will be jettisoned and the individual elements spacecraft are brought in to their final Mercury orbit: 480x1500km for MPO, and 590x11640km for Mio.  </p><p>On its way BepiColombo with its state of the art and very comprehensive payload has several opportunities for scientific observations - during the cruise into the inner solar system and during its nine planetary flybys (one at Earth, two at Venus and six at Mercury). However, since the spacecraft is in a stacked configuration not all of the instruments can be operated during the cruise phase.</p><p>Some of the instruments have been already operated regularly or partially during the flybys in their “scientific” observation mode: e.g. the magnetometer (MPO-MAG), the accelerometer (ISA), the environmental sensor (BERM), the gamma-ray and neutron spectrometer (MGNS), the solar intensity x-ray and particle spectrometer (SIXS), the radio science experiment (MORE), using the X-band and the Ka-band, the thermal infrared spectrometer (MERTIS), the UV spectrometer (PHEBUS) and some sensors of the SERENA suite. Also, instruments or some parts of the instruments of the Japanese Mio spacecraft like the dust monitor (MDM), the plasma wave instrument (PWI), the particle and plasma experiments of MPPE and the magnetometer (MGF) were already successfully operated in their science modes. BepiColombo also took regular “selfie” images with their three monitoring cameras on the MTM. These cameras were also able to take a sequence of outreach images during the flybys at Earth and Venus in 2020. Other instruments such as cameras and NIR spectrometer (SIMBIO-SYS), the laser altimeter (BELA), the x-ray spectrometer (MIXS), and parts of the electron, neutron, and iron sensors of SERENA on MPO and MSASI and some dedicated sensors of PWI and MPPE are operational, but can only be used in their scientific modes after the Mercury in-orbit commissioning in early 2026 because their field of view is blocked by the underlying Transfer Module.</p><p>Despite the reduced instrument availability, scientific and engineering operations has been scheduled during the cruise phase, especially during the swing-bys. A status of the mission and instruments and a summary of first results from measurements taken during the first three years en route to Mercury will be given.</p>


2018 ◽  
Vol 123 (6) ◽  
pp. 4961-4978 ◽  
Author(s):  
Romina Nikoukar ◽  
David J. Lawrence ◽  
Patrick N. Peplowski ◽  
Ryan M. Dewey ◽  
Haje Korth ◽  
...  

Author(s):  
Shoshana Z. Weider

This is an advance summary of a forthcoming article in the Oxford Research Encyclopedia of Planetary Science. Please check back later for the full article. Although having knowledge of a terrestrial planet’s chemistry is fundamental to understanding the origin and composition of its rocks, until recently, the geochemistry of Mercury—the Solar System’s innermost planet—was largely unconstrained. Without the availability of geological specimens from Mercury, studying the planet’s surface and bulk composition relies on remote sensing techniques. Moreover, Mercury’s proximity to the Sun makes it difficult to study with Earth/space-based telescopes, or with planetary probes. Indeed, to date, only NASA’s Mariner 10 and MESSENGER missions have been sent to Mercury. The former made three “flyby” encounters of Mercury between 1974 and 1975, but did not carry any instrument to make geochemical or mineralogical measurements of the surface. Until the MESSENGER flyby and orbital campaigns (2008–2015), therefore, knowledge of Mercury’s chemical composition was severely limited and consisted of only a few facts. For example, it has long been known that Mercury has the highest uncompressed density of all the terrestrial planets (and thus a disproportionately large iron core). In addition, Earth-based spectral reflectance observations indicated a dark surface, largely devoid of iron within silicate minerals. To improve understanding of Mercury’s geochemistry, the MESSENGER payload included a suite of geochemical sensing instruments: namely the X-Ray Spectrometer, Gamma-Ray Spectrometer, and Neutron Spectrometer. Indeed, the datasets obtained from these instruments (as well as from other complementary instruments) during MESSENGER’s 3.5-year orbital mission allow a much more complete picture of Mercury’s geochemistry to be drawn, and quantitative abundance estimates for several major rock-forming elements in Mercury’s crust are now available. Overall, the MESSENGER data reveal a surface that is rich in Mg, but poor in Al and Ca, compared with typical terrestrial and lunar crustal materials. Mercury’s surface also contains high concentrations of the volatile elements Na, S, K, and Cl. Furthermore, the total surface Fe abundance is now known to be <2 wt%, and the planet’s low reflectance is thought to be primarily caused by the presence of C (in graphite) at a level of >1 wt%. Such data are key to constraining models for Mercury’s formation and early evolution. Large-scale spatial variations in the MESSENGER geochemical datasets have also led to the designation of several geochemical “terrains” across Mercury’s surface, which do not always align to otherwise mapped geological regions. Based on the MESSENGER geochemical results, several recent petrological experiments and calculations have been, and continue to be, performed to study Mercury’s surface mineralogy. The results show that there are substantial differences in the precise mineral compositions and abundances among the different terrains, but Mercury’s surface appears to be dominated by Mg-rich olivines and pyroxenes, as well as plagioclase and sulphide phases. Depending on the classification scheme used, Mercury’s ultramafic surface rocks can thus be described as similar in nature to terrestrial boninites, andesites, norites, or gabbros.


Sign in / Sign up

Export Citation Format

Share Document