The hybridization of clay minerals with conducting polymers receives great interest for different potential applications, including environmental remediation. This work studies and compares the electrochemical properties of two different clays, montmorillonite (Mont) and diatomite (Diat), and their respective clay/PEDOT-PSS hybrid materials in H2SO4 medium. The hybrid materials were prepared by electropolymerization of EDOT in the presence of PSS. The physico-chemical and electrochemical properties of both clays were analyzed by different techniques, and the influence of the clay properties on electropolymerization and the electroactivity of the resulting clay/PEDOT-PSS hybrids was investigated. Specifically, the Fe2+/Fe3+ redox probe and the oxidation of diclofenac, as a model pharmaceutical emerging pollutant, were used to test the electron transfer capability and oxidative response, respectively, of the clay/PEDOT-PSS hybrids. The results demonstrate that, despite its low electrical conductivity, the Mont is an electroactive material itself with good electron-transfer capability. Conversely, the Diat shows no electroactivity. The hybridization with PEDOT generally enhances the electroactivity of the clays, but the clay properties affect the electropolymerization efficiency and hybrids electroactivity, so the Mont/PEDOT displays improved electrochemical properties. It is demonstrated that clay/PEDOT-PSS hybrids exhibit diclofenac oxidation capability and diclofenac concentration sensitivity.
Preparation and Characterization of Montmorillonite/PEDOT-PSS and Diatomite/PEDOT-PSS Hybrid Materials. Study of Electrochemical Properties in Acid Medium
