Aiming at the problem that the frequency offset in the non-cooperative communication system causes the received signal spectrum to shift, which exceeds the passband of the matched filter and affects the subsequent demodulation, a parameter estimation and signal detection algorithm based on adaptive capture is proposed by this paper, which is more convenient for hardware implementation and consumes less resources. The algorithm is divided into three parts. Firstly, use the correlation value between the signal and the preamble sequence as the basis for frequency capture. Secondly, the frequency is accurately estimated based on the interpolation algorithm. Finally, the phase-locked loop structure is used to track the frequency according to the characteristics of the frequency gradually changing and the signal frequency offset is eliminated in the Digital Down Converter stage. It provides necessary conditions for accurate signal detection and phase estimation. The simulation results show that the algorithm has high estimation accuracy, wide esti-mation range and low complexity. It can also achieve better estimation accuracy and detection performance under low signal-to-noise ratio.
States Correction by On-line Parameter Estimation and Fault Signal Detection Strategy Based on Minitram-gyro-sensor
