Integration of solar latent heat storage towards optimal small-scale combined heat and power generation by Organic Rankine Cycle

2020 ◽  
Vol 29 ◽  
pp. 101367 ◽  
Author(s):  
Jesus Lizana ◽  
Chiara Bordin ◽  
Talieh Rajabloo
2012 ◽  
Vol 2012.22 (0) ◽  
pp. 331-332
Author(s):  
VanThang Doan ◽  
Sinichiro Wakashima ◽  
Noboru Yamada ◽  
Akira Hoshi

Author(s):  
Wahiba Yaïci ◽  
Evgueniy Entchev

Abstract A continued increase in both energy demand and greenhouse gas emissions (GHGs) call for utilising energy sources effectively. In comparison with traditional energy set-ups, micro-combined heat and power (micro-CHP) generation is viewed as an effective alternative; the aforementioned system’s definite electrical and thermal generation may be attributed to an augmented energy efficiency, decreased capacity as well as GHGs percentage. In this regard, organic Rankine cycle (ORC) has gained increasing recognition as a system, which is capable for generating electrical power from solar-based, waste heat, or thermal energy sources of a lower quality, for instance, below 120 °C. This study focuses on investigating a solar-based micro-CHP system’s performance for use in residential buildings through utilising a regenerative ORC. The analysis will focus on modelling and simulation as well as optimisation of operating condition of several working fluids (WFs) in ORC in order to use a heat source with low-temperature derived from solar thermal collectors for both heat and power generation. A parametric study has been carried out in detail for analysing the effects of different WFs at varying temperatures and flowrates from hot and cold sources on system performance. Significant changes were revealed in the study’s outcomes regarding performance including efficiency as well as power obtained from the expander and generator, taking into account the different temperatures of hot and cold sources for each WF. Work extraction carried out by the expander and electrical power had a range suitable for residential building applications; this range was 0.5–5 kWe with up to 60% electrical isentropic efficiency and up to 8% cycle efficiency for 50–120 °C temperature from a hot source. The operation of WFs will occur in the hot source temperature range, allowing the usage of either solar flat plate or evacuated tube collectors.


2019 ◽  
Vol 140 ◽  
pp. 461-476 ◽  
Author(s):  
Irene Garcia-Saez ◽  
Juan Méndez ◽  
Carlos Ortiz ◽  
Drazen Loncar ◽  
José A. Becerra ◽  
...  

Recycling ◽  
2019 ◽  
Vol 4 (3) ◽  
pp. 26
Author(s):  
Monika Czop ◽  
Nikolina Poranek ◽  
Adrian Czajkowski ◽  
Łukasz Wagstyl

The article compares the energetic qualities of fuels from waste with hard coal. A cogeneration system has been modeled based on the organic Rankine cycle (ORC) powered by the investigated fuels in order to identify possibilities as well as problems in use of fuels from waste in an exemplary cogeneration unit in distributed generation. The emission of thermal transition of the investigated fuels has been calculated on the basis of their energetic use in order to determine the aggregate impact on the environment, people’s health and the ecosystem. In order to conduct the research, Ebsilon Professional and SIMAPro software were used. The article demonstrated the energetic and ecological validity of the use of fuels form waste in small-scale combined heat and power (CHP). The energetic potential and influence on the environment, people’s health and the ecosystem depends on the quality of fuel, but the strict regulations for generating fuels from waste and the flexibility in forming them, allow for a product which is more beneficial economically and ecologically than hard coal.


2017 ◽  
Author(s):  
G. C. Glatzmaier ◽  
J. Rea ◽  
M. L. Olsen ◽  
C. Oshman ◽  
C. Hardin ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document