Gelation mechanism and physical properties of glucono-δ-lactone induced alginate sodium/casein composite gels

The physical properties of solid gel electrolytes of either polyvinylidene diflurohexafluoropropylene or a combination of polyvinylidene hexafluoropropylene and polyacrylic acid, and the molten salts 1-ethyl-3-methylimidazolium tetrafluoroborate, 1,2-dimethyl-3-n-propylimidazolium tetrafluoroborate, and the new molten salts 1,2-dimethyl-3-n-butylimidazolium tetrafluoroborate, and 1,2-dimethyl-3-n-butylimidazolium hexafluorophosphate were characterized by temperature dependent ionic conductivity measurements for both the pure molten salt and of the molten salt with 0.5 M Li+ present. Ionic conductivity data indicate that for each of the molten salts, the highest concentration of molten salt allowable in a single component polymer gel was 85%, while gels composed of 90%molten salt were possible when using both polyvinylidene hexafluorophosphate and polyacrylic acid. For polymer gel composites prepared using lithium containing ionic liquids, the optimum polymer gel composite consisted of 85% of the 0.5 M Li+/ionic liquid, 12.75% polyvinylidene hexafluoropropylene, and 2.25% poly (1-carboxyethylene). The highest ionic conductivity observed was for the gel containing 90%1-ethyl-3-methyl-imidazolium tetrafluoroborate, 9.08 mS/cm. For the lithium containing ionic liquid gels, their ionic conductivity ranged from 1.45 to 0.05 mS/cm, which is comparable to the value of 0.91 mS/cm, observed for polymer composite gels containing 0.5 M LiBF4 in propylene carbonate.

Download Full-text

The Photometric Properties of the Ap Stars

International Astronomical Union Colloquium ◽

10.1017/s0252921100080684 ◽

1976 ◽

Vol 32 ◽

pp. 365-377 ◽

Cited By ~ 2

Author(s):

B. Hauck

Keyword(s):

Physical Properties ◽

Ap Stars

The Ap stars are numerous - the photometric systems tool It would be very tedious to review in detail all that which is in the literature concerning the photometry of the Ap stars. In my opinion it is necessary to examine the problem of the photometric properties of the Ap stars by considering first of all the possibility of deriving some physical properties for the Ap stars, or of detecting new ones. My talk today is prepared in this spirit. The classification by means of photoelectric photometric systems is at the present time very well established for many systems, such as UBV, uvbyβ, Vilnius, Geneva and DDO systems. Details and methods of classification can be found in Golay (1974) or in the proceedings of the Albany Colloquium edited by Philip and Hayes (1975).

Download Full-text

The Infection of Cells by Bullet-Shaped Viruses

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100063779 ◽

1969 ◽

Vol 27 ◽

pp. 372-373

Author(s):

Frederick A. Murphy ◽

Alyne K. Harrison ◽

Sylvia G. Whitfield

Keyword(s):

Electron Microscopy ◽

Physical Properties ◽

Host Cell ◽

Thin Section ◽

Cultured Cells ◽

Cell Infection ◽

Thin Section Electron Microscopy ◽

Section Electron ◽

Section Electron Microscopy

The bullet-shaped viruses are currently classified together on the basis of similarities in virion morphology and physical properties. Biologically and ecologically the member viruses are extremely diverse. In searching for further bases for making comparisons of these agents, the nature of host cell infection, both in vivo and in cultured cells, has been explored by thin-section electron microscopy.

Download Full-text

Transmission electron microscopy of composite materials

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100107125 ◽

1988 ◽

Vol 46 ◽

pp. 1012-1015

Author(s):

K.P.D. Lagerlof

Keyword(s):

Composite Materials ◽

Physical Properties ◽

Structural Defects ◽

Structural Composites ◽

Multiphase Materials ◽

Structural Reinforcement ◽

Transmission Electron ◽

Reinforced Fiber ◽

Particulate Reinforced Composites ◽

Definition Of

Although most materials contain more than one phase, and thus are multiphase materials, the definition of composite materials is commonly used to describe those materials containing more than one phase deliberately added to obtain certain desired physical properties. Composite materials are often classified according to their application, i.e. structural composites and electronic composites, but may also be classified according to the type of compounds making up the composite, i.e. metal/ceramic, ceramic/ceramie and metal/semiconductor composites. For structural composites it is also common to refer to the type of structural reinforcement; whisker-reinforced, fiber-reinforced, or particulate reinforced composites [1-4].For all types of composite materials, it is of fundamental importance to understand the relationship between the microstructure and the observed physical properties, and it is therefore vital to properly characterize the microstructure. The interfaces separating the different phases comprising the composite are of particular interest to understand. In structural composites the interface is often the weakest part, where fracture will nucleate, and in electronic composites structural defects at or near the interface will affect the critical electronic properties.

Download Full-text