Influence of the nano-hybrid pour point depressant on flow properties of waxy crude oil

Fuel ◽  
2016 ◽  
Vol 167 ◽  
pp. 40-48 ◽  
Author(s):  
Cunzhe He ◽  
Yanfen Ding ◽  
Juan Chen ◽  
Feng Wang ◽  
Chong Gao ◽  
...  
Author(s):  
Rituraj Singh ◽  
Prasenjit Talukdar

In the aura of this research we developed the grafted nanocomposite pour point depressant by culmination of a set of monomers namely acrylamide, maleic anhydride, styrene, and octadecyl methacrylate and further grafted to nano silica for improving the flow properties and thereby decrease the temperature of pour point value of the NorthEast Indian waxy based crude oil. Moreover, to emphasize and understand the central effects of different concentrations of synthesized nanocomposite pour point depressants on the pour point of waxy crude oil, several important experiments were undergone and later its results were compared with the commercial pour point depressant. In addition, the rheological props of the sample crude were also analyzed with and without additives. The results shows that the synthesized nanocomposite has more effectively reduced the viscosity as well as pour point of the sample to desired value when compared to that of the commercially used pour point depressant.


SPE Journal ◽  
2021 ◽  
pp. 1-13
Author(s):  
Biswadeep Pal ◽  
Tarun Kumar Naiya

Summary Pour-point depressants (PPDs) were synthesized from natural sources and used in waxy crude oil transportation to reduce the pour point and improve flow. A biodegradable PPD (BPPD) was synthesized and tested to mitigate crude oil flow assurance problems in the present work. The transesterification process was used to synthesize coconut oil ethyl ester (COEE, termed as BPPD). Fourier transform electron spectroscopy (FTIR), proton nuclear magnetic resonance (H-NMR), and microscopic analysis were performed for better understanding of mechanisms for both BPPD and a commercially available PPD named PPD-A. The pour point of crude oil was reduced by 12 and 9°C after the addition of 800 ppm BPPD and PPD-A, respectively. The microscopic analysis confirms that the crystals of wax converted to very fine and dispersed particles during mixing of additives, which in turn increase flowability. BPPD performs better to reduce interfacial tension than PPD-A. The maximum reduction of 19% in interfacial tension was observed after the addition of 800 ppm BPPD. BPPD alters the wettability of the pipeline surface from intermediate wet to water-wet within 60 seconds, which results in reduced slip velocity and consequently lessens the deposition of wax. As a result, crude oils will not stick to the wall of the pipe surface and will experience less resistance to flow through pipelines. FTIR analysis indicated that long-chain alkane and aromatic groups are responsible for a higher pour point, and their concentration level was reduced after the addition of BPPD. The viscosity of crude oil was reduced by almost 94% after the addition of 800 ppm BPPD with crude oil, which in turn minimizes pumping costs for crude oil. As a result, the total project cost was reduced substantially. Biodegradability tests confirm that the BPPD is biodegradable and nontoxic. Due to its biodegradability and nontoxic nature, BPPD has a promising capacity to be used in the petroleum industry for easier pipeline transportation of waxy crude.


2018 ◽  
Vol 57 (25) ◽  
pp. 8612-8619 ◽  
Author(s):  
Yongwen Ren ◽  
Long Fang ◽  
Zhaojun Chen ◽  
Hui Du ◽  
Xiaodong Zhang

2017 ◽  
Vol 39 (8) ◽  
pp. 1165-1171 ◽  
Author(s):  
Na Li ◽  
GuoLiang Mao ◽  
XianZhi Shi ◽  
ShiWei Tian ◽  
Yang Liu

2012 ◽  
Vol 524-527 ◽  
pp. 1844-1847 ◽  
Author(s):  
Hong Zhang ◽  
Wen Fa Xiao

The situation of low temperature crude oil pipeline carrying is universal. The rapid developing of pipe line supposes higher asking on new carrying technology. The problem of long distance carrying at normal temperature of high waxy crude oil is impel to resolve and its potential social economic profit is obvious. As the pipeline is designed at high production period of field so there must have low carrying situation at beginning and ending time. At the situation the high waxy crude oil and high pour point crude oil will face on great resistance and blockage problem. Further more the pipeline has to make great energy expense on high temperature carrying. So take new carrying technology to realize atmosphere temperature carrying is crucial of resolving low temperature carrying. The method of adding chemical pour point depressant(PPD)/flow improver additives (FIA) into crude oil directly was widely used at present. The progress of the additives and its study methods was summarized in the paper and supply some reference for the technology of PPD/FIA.


Sign in / Sign up

Export Citation Format

Share Document