The heat and flow characteristics of mist/steam two-phase flow in U-shaped internal cooling passage of gas turbine blade are studid numerically in this paper. The standard k-ε model was used as the turbulence model combined with the DPM model to calculate the influence of mist/steam mass ratio and mist diameter on flow and heat transfer of U-passage with different shaped ribs. The result indicates that under the same working condition, the U-shaped channel with 45 deg. V-shaped ribs has better heat transfer performance than other channels and heat transfer non-uniformity of the U-shaped channel with 75 deg. ribs is the worst among all channels studied in this paper. The heat transfer performance of the U-shaped channel with V-shaped ribs is higher than that of the channel with paralleled ribs. As for the mist/steam cooling in U-shaped passage with same ribs structure, heat transfer non-uniformity increases with the increasing of heat transfer performance. When mists diameter increases from 5μm to 15μm, the heat transfer performance of the Second-Flow-Passage increases obviously and the heat transfer non-uniformity increases at the same time. The heat transfer performance has not been further enhanced when the mists diameter continuously increases after mist diameter are larger than 10μm.
Acceleration of Two-Phase Flow by Boiling : 1st Report, Experimental Study of Heat Transfer Performance
