The effect of pulsating parameters on the spatiotemporal variation of flow and heat transfer characteristics in a ribbed channel of a gas turbine blade with the pulsating inlet flow

2020 ◽  
Vol 153 ◽  
pp. 119609 ◽  
Author(s):  
Daren Zheng ◽  
Xinjun Wang ◽  
Qi Yuan
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Turbine Blade ◽  
Spatiotemporal Variation ◽  
Gas Turbine Blade ◽  
Heat Transfer Characteristics ◽  
Inlet Flow ◽  
Ribbed Channel ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer

Study On Flow and Heat Transfer Characteristics of a New-Proposed Alternating Elliptical U-Channel in the Mid-Chord Region of Gas Turbine Blade

2021 ◽  
Author(s):  
Kun Xiao ◽  
Juan He ◽  
Zhenping Feng
Keyword(s):  
Heat Transfer ◽  
Aspect Ratio ◽  
Gas Turbine ◽  
Turbine Blade ◽  
Thermal Performance ◽  
Cooling Channel ◽  
Gas Turbine Blade ◽  
Heat Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Bend Channel

Abstract This paper proposed an alternating elliptical U-bend cooling channel which can be applied in the mid-chord region of gas turbine blade and manufactured by precision casting, based on the optimal flow field structure deduced from the Field Synergy Principle, and investigated the flow and heat transfer characteristics in this alternating elliptical U-bend cooling channel thoroughly. Numerical simulations were performed by using 3D steady solver of Reynolds-averaged Navier-Stokes equations (RANS) with the standard k-e turbulence model. The influence of alternating of cross section on heat transfer and pressure drop of the channel was studied by comparing with the smooth elliptical U-bend channel. On this basis, the effect of aspect ratio (length ratio of the major axis to the minor axis) and alternating angle were further investigated. The results showed that, in the first pass of the alternating elliptical U-bend channel, for different Re, four or eight longitudinal vortices were generated. In the second pass, the alternating elliptical channel restrained the flow separation to a certain extent and a double-vortex structure was formed. The average Nusselt number of the alternating elliptical U-bend channel was significantly higher than that of the straight channel, but the pressure loss only increased slightly. With the increase of aspect ratio, the thermal performance of the channel increased, and when the alternating angle is between 40° and 90°, the thermal performance nearly kept constant and also the best.

Detailed Studies on the Flow Field and Heat Transfer Characteristics Inside a Realistic Serpentine Cooling Channel With a S-Shaped Inlet

2018 ◽  
Author(s):  
Ken-ichi Funazaki ◽  
Hikaru Odagiri ◽  
Takeshi Horiuchi ◽  
Masahide Kazari
Keyword(s):  
Heat Transfer ◽  
Flow Field ◽  
Flow Visualization ◽  
Gas Turbine ◽  
Turbine Blade ◽  
Cooling Channel ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Inner Surface

Accurate temperature prediction of turbine blades for gas turbine is very important to assure the life-span of the blade under a hostile hot gas environment and intense centrifugal force. Therefore, there have been a number of studies carried out to clarify the cooling performance of serpentine cooling channel inside a turbine blade for gas turbine, however, it remains to be quite difficult to make an accurate numerical prediction of the performance. Apart from the effects of disk rotation as well as large temperature gradient near the wall, such a poor predictability can be attributed to the complicated vortical motions caused by the rib-roughened cooling channel whose cross-sectional shape varies along the channel and by the existence of u-bends. Furthermore, since the cooling channel inside a real turbine blade usually has a curved or S-shaped inlet, which may induce flow separation as well as swirl developed in the inlet, it can be imagined that the flow and heat transfer inside the cooling channel is likely to become much more complicated than that with a straight inlet. Despite this situation, only few studies are made in order to examine the flow and heat transfer characteristics inside the cooling channel with s-shaped inlet. Accordingly, this study aims at detailed experimental and numerical investigations on the flow and heat transfer characteristics of a realistic serpentine rib-roughened cooling channel with an s-shaped inlet, which is modeled from an actual HP turbine blade for gas turbine. This study employs a transient TLC (Thermochromic Liquid Crystal) technique to measure the heat transfer characteristics, along with the flow visualization on the inner surface of the channel using oil mixed with titanium powder. Note that a special focus in this flow visualization is placed on the area of s-shaped inlet. As for the flow measurement, 2D-PIV (Particle Image Velocimetry) method is used to understand time-dependent vortical structures of the flow field that can have significant impacts on the heat transfer. RANS-based numerical simulation is also executed to predict the heat transfer distribution on the inner surface of the cooling channel.

Flow and Heat Transfer Characteristics in Models of Turbine Blade Tip-Walls With Three Kinds of Turning Vanes

2018 ◽  
Author(s):  
Bin Wu ◽  
Xing Yang ◽  
Lv Ye ◽  
Zhao Liu ◽  
Yu Jiang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Turbine Blade ◽  
Double Layer ◽  
Pressure Loss ◽  
Stokes Equations ◽  
Wall Heat Transfer ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Blade Tip

In this paper, effects of three kinds of turning vanes on flow and heat transfer of turbine blade tip-walls with a U-shaped channel have been numerically studied. Numerical simulations are performed to solve three-dimensional, steady, Reynolds-averaged Navier-Stokes equations with the standard k-ω turbulence model. The aspect ratio (AR) and the hydraulic diameter of the channel are 2 and 93.13 mm, respectively. The effects of single-layer, double-layer and double-layer dome-shaped turning vanes in the turn region on the tip-wall heat transfer and overall pressure loss of rectangular U-shaped channels are analyzed. Detailed flow and heat transfer characteristics over the tip-walls, as well as the overall performance, are presented and compared with each other. Results show that the tip-wall heat transfer coefficients with double-layer dome-shaped turning vanes are the highest among the three cases. Double-layer dome-shaped turning vanes can promote the lateral spreading of secondary flow and effectively increase the uniformity of heat transfer on the tip-wall. More importantly, this structure can make the cooling air expand and accelerate at the center region of the top of the U-shaped channel, resulting in more heat to be removed from the tip-wall. Additionally, double-layer dome-shaped turning vanes can effectively reduce the pressure loss of the channel.

Sign in / Sign up

Export Citation Format

Share Document