Analytical model and experimental validation of surface roughness for incremental sheet metal forming parts

2019 ◽  
Vol 146 ◽  
pp. 103453 ◽  
Author(s):  
Zhidong Chang ◽  
Jun Chen
Keyword(s):  
Surface Roughness ◽  
Sheet Metal ◽  
Analytical Model ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Experimental Validation ◽  
Incremental Sheet Metal Forming

scholarly journals Effect of Process Parameters and Preheating Temperature on Surface Roughness and Thickness Distribution in Hole Flanging using Incremental Sheet Metal Forming

2019 ◽  
Vol 8 (12S2) ◽  
pp. 84-87
Keyword(s):  
Surface Roughness ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Thickness Distribution ◽  
Research Work ◽  
Preheating Temperature ◽  
Incremental Sheet Metal Forming ◽  
Best Parameter ◽  
Hole Flanging

Incremental Sheet metal forming is a die less method of forming which offers high formability. In this research work; effect of step depth, tool rotation speed and preheating temperature on surface roughness and thinning of flange wall is investigated in hole flanging using incremental forming. The parameter optimization is carried out by Taguchi method. Grey relational analysis is carried out to obtain best parameter combination.

scholarly journals Influence of process parameters on surface roughness and forming time of Al-1100 sheet in incremental sheet metal forming

2019 ◽  
Vol 13 (2) ◽  
pp. 4911-4927
Author(s):  
Swagatika Mohanty ◽  
Srinivasa Prakash Regalla ◽  
Yendluri Venkata Daseswara Rao
Keyword(s):  
Surface Roughness ◽  
Response Surface ◽  
Sheet Metal ◽  
Process Parameters ◽  
Sheet Metal Forming ◽  
Feed Rate ◽  
Metal Forming ◽  
Wall Angle ◽  
Surface Method ◽  
Incremental Sheet Metal Forming

Product quality and production time are critical constraints in sheet metal forming. These are normally measured in terms of surface roughness and forming time, respectively. Incremental sheet metal forming is considered as most suitable for small batch production specifically because it is a die-less manufacturing process and needs only a simple generic fixture. The surface roughness and forming time depend on several process parameters, among which the wall angle, step depth, feed rate, sheet thickness, and spindle speed have a greater impact on forming time and surface roughness. In the present work, the effect of step depth, feed rate and wall angle on the surface roughness and forming time have been investigated for constant 1.2 mm thick Al-1100 sheet and at a constant spindle speed of 1300 rpm. Since the variable effects of these parameters necessitate multi-objective optimization, the Taguchi L9 orthogonal array has been used to plan the experiments and the significance of parameters and their interactions have been determined using analysis of variance (ANOVA) technique. The optimum response has been brought out using response surfaces. Finally, the findings of response surface method have been validated by conducting additional experiments at the intermediate values of the parameters and these results were found to be in agreement with the predictions of Taguchi method and response surface method.

Formability and Surface Finish Studies in Single Point Incremental Forming

2011 ◽  
Author(s):  
A. Bhattacharya ◽  
Samarjit Singh ◽  
K. Maneesh ◽  
N. Venkata Reddy ◽  
Jian Cao
Keyword(s):  
Surface Roughness ◽  
Sheet Metal ◽  
Surface Finish ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Incremental Forming ◽  
Experimental Results ◽  
Wall Angle ◽  
Incremental Sheet Metal Forming ◽  
Tool Diameter

Incremental sheet metal forming (ISMF) has demonstrated its great potential to form complex three-dimensional parts without using a component specific tooling. The die-less nature in incremental forming provides a competitive alternative for economically and effectively fabricating low-volume functional sheet parts. However, ISMF has limitations with respect to maximum formable wall angle, geometrical accuracy and surface finish of the component. In the present work, an experimental study is carried out to study the effect of incremental sheet metal forming process variables on maximum formable angle and surface finish. Box-Behnken method is used to design the experiments for formability study and full factorial method is used for surface finish study. Analysis of experimental results indicates that formability in incremental forming decreases with increase in tool diameter. Formable angle first increases and then decreases with incremental depth and it is also observed that the variation in the formable angle is not significant in the range of incremental depths considered to produce good surface finishes during the present study. A simple analysis model is used to estimate the stress values during incremental sheet metal forming assuming that the deformation occurs predominantly under plane strain condition. A stress based criterion is used along with the above mentioned analysis to predict the formability in ISMF and its predictions are in very good agreement with the experimental results. Surface roughness decreases with increase in tool diameter for all incremental depths. Surface roughness increases first with increase in incremental depth up to certain angle and then decreases. Surface roughness value decreases with increase in wall angle.

scholarly journals Effect of Process Parameters and Preheating Temperature on Surface Roughness and Thickness Distribution in Hole Flanging using Incremental Sheet Metal Forming

2019 ◽  
Vol 9 (2) ◽  
pp. 666-669
Keyword(s):  
Surface Roughness ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Thickness Distribution ◽  
Research Work ◽  
Preheating Temperature ◽  
Incremental Sheet Metal Forming ◽  
Best Parameter ◽  
Hole Flanging

Incremental Sheet metal forming is a die less method of forming which offers high formability. In this research work; effect of step depth, tool rotation speed and preheating temperature on surface roughness and thinning of flange wall is investigated in hole flanging using incremental forming. The parameter optimization is carried out by Taguchi method. Grey relational analysis is carried out to obtain best parameter combination.

Formability and Surface Finish Studies in Single Point Incremental Forming

2011 ◽  
Vol 133 (6) ◽  
Author(s):  
A. Bhattacharya ◽  
K. Maneesh ◽  
N. Venkata Reddy ◽  
Jian Cao
Keyword(s):  
Surface Roughness ◽  
Sheet Metal ◽  
Surface Finish ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Incremental Forming ◽  
Experimental Results ◽  
Wall Angle ◽  
Incremental Sheet Metal Forming ◽  
Tool Diameter

Incremental sheet metal forming (ISMF) has demonstrated its great potential to form complex three-dimensional parts without using a component specific tooling. The die-less nature in incremental forming provides a competitive alternative for economically and effectively fabricating low-volume functional sheet parts. However, ISMF has limitations with respect to maximum formable wall angle, geometrical accuracy, and surface finish of the component. In the present work, an experimental study is carried out to study the effect of incremental sheet metal forming process variables on maximum formable angle and surface finish. Box–Behnken method is used to design the experiments for formability study and full factorial method is used for surface finish study. Analysis of experimental results indicates that formability in incremental forming decreases with increase in tool diameter. Formable angle first increases and then decreases with incremental depth and it is also observed that the variation in the formable angle is not significant in the range of incremental depths considered to produce good surface finishes during the present study. A simple analysis model is used to estimate the stress values during incremental sheet metal forming assuming that the deformation occurs predominantly under plane strain condition. A stress-based criterion is used along with the above mentioned analysis to predict the formability in ISMF and its predictions are in very good agreement with the experimental results. Surface roughness decreases with increase in tool diameter for all incremental depths. Surface roughness increases first with increase in incremental depth up to certain angle and then decreases. Surface roughness value decreases with increase in wall angle.

Surface Roughness in Incremental Sheet Metal Forming of AA5052

2013 ◽  
Vol 753-755 ◽  
pp. 203-206 ◽  
Author(s):  
On Uma Lasunon
Keyword(s):  
Surface Roughness ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Feed Rate ◽  
Metal Forming ◽  
Single Point ◽  
Forming Process ◽  
Wall Angle ◽  
Incremental Sheet Metal Forming ◽  
Depth Increment

This paper presents the effect of forming parameters on the arithmetic mean surface roughness (Ra) of aluminum alloy built by a single-point incremental sheet metal forming process. Three investigated parameters are feed rate (12.5, 25 and 50 in/min), depth increment (0.015 and 0.030 in), and wall angle (45° and 60°). The results show that wall angle, depth increment and its interaction play an important role on the surface roughness, while feed rate has little effect. The optimal forming conditions for minimum surface roughness are feed rate of 25 in/min, depth increment of 0.015 in and wall angle of 45°.

Comparison of incremental sheet metal forming process using newly designed multipoint tool with the existing single point tool by optimization and characterization methods on austenite stainless steel 202

2021 ◽  
pp. 095440542098609
Author(s):  
Ramkumar Kathalingam ◽  
Baskar Neelakandan ◽  
Elangovan Krishnan ◽  
Sathiya Narayanan Chinnayan ◽  
Selvarajan Arangulavan ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Incremental Forming ◽  
Single Point ◽  
Research Work ◽  
Forming Process ◽  
Wall Angle ◽  
Incremental Sheet Metal Forming

Incremental Sheet metal Forming (ISF) is a reliable process of converting a blank to work piece with better outputs compared to conventional forming process. The flexibility of ISF in producing the rapid prototype based on the customer needs is increased which is also desirable in the industry. But Single Point Incremental Forming (SPIF) process takes more time to form a product and hence the longer time is a barrier in implementing this process in industries. In this research work, the ISF process was made on sheet metal SS 202 using a newly designed multi-point tool and the obtained outputs were compared with the same material of sheet metal formed by traditionally available single point tool. This Multi Point Incremental Forming (MPIF) process takes lesser process time to give better formability, improved wall angle and good surface roughness. The input process parameters selected for the process are type of tool, speed, feed, Vertical Step Depth (VSD), and lubrication. They are arranged by using the taguchi Design of Experiments (DOE) approach. The responses considered are wall angle, formability, surface roughness, spring back and forming time. The multiple outputs obtained were optimized by Grey Relational Analysis (GRA) to predict the superior parameter. Confirmation test was also made to validate the output result. Fractography analysis was carried out to predict the fracture mechanism obtained during the forming process. The surface topography was also made on the surface of the formed area of the sheet metal. This research work concludes that newly designed MPIF outperforms SPIF.

Sign in / Sign up

Export Citation Format

Share Document