A Crystal Plasticity Model for Porous HCP Crystals in Titanium Alloys under Multiaxial Loading Conditions

2021 ◽  
pp. 111400
Author(s):  
Qingcheng Yang ◽  
Somnath Ghosh
Keyword(s):  
Titanium Alloys ◽  
Crystal Plasticity ◽  
Plasticity Model ◽  
Multiaxial Loading ◽  
Loading Conditions ◽  
Crystal Plasticity Model

scholarly journals An enhanced damage plasticity model for predicting the cyclic behavior of plain concrete under multiaxial loading conditions

2021 ◽  
Author(s):  
Mohammad Reza Azadi Kakavand ◽  
Ertugrul Taciroglu
Keyword(s):  
Uniaxial Tension ◽  
Damage Mechanics ◽  
Plain Concrete ◽  
Cyclic Behavior ◽  
Plasticity Model ◽  
Multiaxial Loading ◽  
Loading Conditions ◽  
Confined Compression ◽  
Concrete Damage ◽  
Concrete Damage Plasticity

AbstractSome of the current concrete damage plasticity models in the literature employ a single damage variable for both the tension and compression regimes, while a few more advanced models employ two damage variables. Models with a single variable have an inherent difficulty in accounting for the damage accrued due to tensile and compressive actions in appropriately different manners, and their mutual dependencies. In the current models that adopt two damage variables, the independence of these damage variables during cyclic loading results in the failure to capture the effects of tensile damage on the compressive behavior of concrete and vice-versa. This study presents a cyclic model established by extending an existing monotonic constitutive model. The model describes the cyclic behavior of concrete under multiaxial loading conditions and considers the influence of tensile/compressive damage on the compressive/tensile response. The proposed model, dubbed the enhanced concrete damage plasticity model (ECDPM), is an extension of an existing model that combines the theories of classical plasticity and continuum damage mechanics. Unlike most prior studies on models in the same category, the performance of the proposed ECDPM is evaluated using experimental data on concrete specimens at the material level obtained under cyclic multiaxial loading conditions including uniaxial tension and confined compression. The performance of the model is observed to be satisfactory. Furthermore, the superiority of ECDPM over three previously proposed constitutive models is demonstrated through comparisons with the results of a uniaxial tension-compression test and a virtual test.

Multi-level direct crystal plasticity model of polycrystalline specimen: Grains generation

2021 ◽  
Author(s):  
Artyom A. Tokarev ◽  
Anton Yu. Yants ◽  
Alexey I. Shveykin ◽  
Nikita S. Kondratiev
Keyword(s):  
Crystal Plasticity ◽  
Plasticity Model ◽  
Polycrystalline Specimen ◽  
Crystal Plasticity Model ◽  
Multi Level

Crystal Plasticity Predictions of Forward-Reverse Simple Shear Flow Stress

2011 ◽  
Vol 702-703 ◽  
pp. 204-207 ◽  
Author(s):  
Young Ung Jeong ◽  
Frédéric Barlat ◽  
Myoung Gyu Lee
Keyword(s):  
Flow Stress ◽  
Crystal Plasticity ◽  
Simple Shear ◽  
Bauschinger Effect ◽  
Texture Evolution ◽  
Simple Shear Flow ◽  
Plasticity Model ◽  
Lower Yield Stress ◽  
Crystal Plasticity Model ◽  
Stress Reversals

The flow stress behavior of a bake-hardenable steel during a few simple shear cycles is investigated using a crystal plasticity model. The simple shear test provides a stable way to reverse the loading direction. Stress reversals were accompanied with a lower yield stress, i.e., the Bauschinger effect, followed by a transient hardening stage with a plateau region and, permanent softening. The origins of these three distinct stages are discussed using a crystal plasticity model. To this end, the representative discrete grain set is tuned to capture such behavior by coupling slip system hardening appropriately. The simulated results are compared with experimental forward-reverse simple shear stress-strain curves. It is shown that the characteristic flow stress stages are linked to texture evolution and to the Bauschinger effect acting on the different slip systems.

scholarly journals Crystal Plasticity Model of Reactor Pressure Vessel Embrittlement in GRIZZLY

2015 ◽  
Author(s):  
Pritam Chakraborty ◽  
Suleyman Bulent Biner ◽  
Yongfeng Zhang ◽  
Benjamin Whiting Spencer
Keyword(s):  
Crystal Plasticity ◽  
Pressure Vessel ◽  
Reactor Pressure Vessel ◽  
Plasticity Model ◽  
Crystal Plasticity Model ◽  
Reactor Pressure
Sign in / Sign up

Export Citation Format

Share Document