Solution to a complex problem after failed limb salvage surgery of the distal femur: A case report describing the tibial turn-up procedure

Author(s):  
Chiao Yee Lim ◽  
Hirohisa Katagiri ◽  
Hideki Murata ◽  
Junji Wasa ◽  
Michihito Miyagi ◽  
...  
2020 ◽  
Vol 18 (1) ◽  
Author(s):  
Jungo Imanishi ◽  
Masayuki Tanabe ◽  
Taisei Kurihara ◽  
Tomoaki Torigoe ◽  
Jun Kikkawa ◽  
...  

Abstract Background Prosthetic reconstruction for distal femoral osteosarcoma is challenging for younger children. We herein report a successful case of limb-sparing surgery for a younger patient with distal femoral osteosarcoma requiring osteo-articular resection. Case presentation A 5-year-old girl with high-grade conventional osteosarcoma in the left distal femur underwent a series of surgeries. After three cycles of neoadjuvant chemotherapy, limb-salvage surgery was planned because femoral rotationplasty had been refused. At 6 years and 2 months old, distal femoral resection and temporary spacer insertion using a 7-mm-diameter intramedullary nail and molded polymethylmethacrylate was performed. At 7 years and 8 months old, secondary surgery was performed because the first spacer had been dislocated and the residual femur became atrophic. The distal end of the residual femur was removed by 1 cm, but the periosteum and induced membrane around polymethylmethacrylate was preserved. In order to stabilize the spacer against the tibia, a custom-made ceramic spacer with a smooth straight 8-mm-diameter stem was utilized. The bone-spacer junction was fixed with polymethylmethacrylate and then covered with the preserved periosteum and induced membrane. After surgery, the bone atrophy improved. At 9 years and 7 months old, the second spacer was removed because it had loosened, and the knee joint was reconstructed using a custom-made growing femoral prosthesis with a curved porous 8.5-mm-diameter stem. Cancellous bone tips from the proximal tibia were grafted around the bone-prosthesis junction underneath the induced membrane. At 10 years and 5 months old, the patient was able to walk unsupported and a radiograph showed further thickening of the cortex of the residual femur without any stress shielding. Although having 5 cm of limb length discrepancy, the patient and her mother were satisfied with the function. The MSTS score was 24 out of 30 points. Repeated limb length extensions are planned. Conclusions This case report provides an example of limb-salvage surgery after distal femoral resection in a small child. The use of a temporary spacer utilizing partial cementation and preservation of the periosteum and induced membrane appears to afford a viable limb-salvage option after distal femoral resection for younger children.


2020 ◽  
Author(s):  
Tao Cai ◽  
Chunlin Zhang ◽  
Lei Zhang ◽  
Kunpeng Zhu ◽  
Jianping Hu ◽  
...  

Abstract Purpose The purpose of this study was to introduce the surgical technique and functional outcome of joint-sparing limb salvage surgery with metaphyseal osteotomy by dependent design of three-dimensional printed prothesis for children with osteosarcoma in distal femur.Methods Between 2012 to 2019, we performed twelve joint sparing limb salvage surgeries (JSLSS) with metaphyseal osteotomy for the children of osteosarcoma in the distal femur with our dependent design of 3D-printed guided plate and prothesis. The clinical assessment including resection margin, limb-length discrepancy, orthopaedic complications and functional outcome would be analyzed.Results The mean operation time for JSLSS was 107.6 minutes and the average blood loss was 194.5ml with the dependent design of 3D-printed prosthesis. With the assistance of guide plate, the mean margin of the osteosarcoma from the epiphyseal plate was 1.6 cm and the mean limb-length discrepancy was 2.2 cm with maximum follow-up period of seven years (mean 45.3 months, range 12-84 months). All the patients could bend their knee through >90° flexion, achieved similar results for ROMs in 6DOF during gait compared with normal data of Chinese knees, and the mean MSTS score was 94.7 for the patients with JSLSS. One patient had a superficial infection and there was one patient of local recurrence happened during the follow-up with the necrosis rate less than 90% by preoperative chemotherapy. None aseptic loosening happened in distal femur for the patients in this group with dependent design of 3D-printed prosthesis.Conclusion Joint-sparing limb salvage surgery by metaphyseal osteotomy with the dependent design of 3D-printed prosthesis and guide plate would be a good choice for the children with osteosarcoma in distal femur.


2020 ◽  
Author(s):  
Jungo Imanishi ◽  
Masayuki Tanabe ◽  
Taisei Kurihara ◽  
Tomoaki Torigoe ◽  
Jun Kikkawa ◽  
...  

Abstract Background: Prosthetic reconstruction for distal femoral osteosarcoma is challenging for younger children. We herein report a successful case of limb-sparing surgery for a younger patient with distal femoral osteosarcoma requiring osteo-articular resection. Case Presentation: A 5-year-old girl with high-grade conventional osteosarcoma in the left distal femurunderwent a series of surgeries. After three cycles of neoadjuvant chemotherapy, limb salvage surgery was planned because femoral rotationplasty had been refused. At 6 years and 2 months old, distal femoral resection and temporary spacer insertion using a 7-mm-diameter intramedullary nail and molded polymethylmethacrylate was performed. At 7 years and 8 months old, secondary surgery was performed because the first spacer had been dislocated and the residual femur became atrophic. The distal end of the residual femur was removed by 1 cm, but the periosteum and induced membrane around polymethylmethacrylate was preserved. In order to stabilize the spacer against the tibia, a custom-made ceramic spacer with a smooth straight 8-mm-diameter stem was utilized. The bone-spacer junction was fixed with polymethylmethacrylate, and then covered with the preserved periosteum and induced membrane. After surgery, the bone atrophy improved. At 9 years and 7 months old, the second spacer was removed because it had loosened, and the knee joint was reconstructed using a custom-made growing femoral prosthesis with a curved porous 8.5-mm-diameter stem. Cancellous bone tips from the proximal tibia were grafted around the bone-prosthesis junction underneath the induced membrane. At 10 years and 5 months old, the patient was able to walk unsupported and a radiograph showed further thickening of the cortex of the residual femur without any stress shielding. Although having 5 cm of limb length discrepancy, the patient and her mother were satisfied with the function. The MSTS score was 24 out of 30 points. Repeated limb length extensions are planned.Conclusions: This case report provides an example of limb salvage surgery after distal femoral resection in a small child. The use of a temporary spacer utilizing partial cementation and preservation of the periosteum and induced membrane appears to afford a viable limb-salvage option after distal femoral resection for younger children.


2020 ◽  
Author(s):  
Jungo Imanishi ◽  
Masayuki Tanabe ◽  
Taisei Kurihara ◽  
Tomoaki Torigoe ◽  
Jun Kikkawa ◽  
...  

Abstract Background: Prosthetic reconstruction for distal femoral osteosarcoma is challenging for younger children. We herein report a successful case of limb-sparing surgery for a younger patient with distal femoral osteosarcoma requiring osteo-articular resection.Case Presentation: A 5-year-old girl with high-grade conventional osteosarcoma in the left distal femur underwent a series of surgeries. After three cycles of neoadjuvant chemotherapy, limb salvage surgery was planned because femoral rotationplasty had been refused. At 6 years and 2 months old, distal femoral resection and temporary spacer insertion using a 7-mm-diameter intramedullary nail and molded polymethylmethacrylate was performed. At 7 years and 8 months old, secondary surgery was performed because the first spacer had been dislocated and the residual femur became atrophic. The distal end of the residual femur was removed by 1 cm, but the periosteum and induced membrane around polymethylmethacrylate was preserved. In order to stabilize the spacer against the tibia, a custom-made ceramic spacer with a smooth straight 8-mm-diameter stem was utilized. The bone-spacer junction was fixed with polymethylmethacrylate, and then covered with the preserved periosteum and induced membrane. After surgery, the bone atrophy improved. At 9 years and 7 months old, the second spacer was removed because it had loosened, and the knee joint was reconstructed using a custom-made growing femoral prosthesis with a curved porous 8.5-mm-diameter stem. Cancellous bone tips from the proximal tibia were grafted around the bone-prosthesis junction underneath the induced membrane. At 10 years and 5 months old, the patient was able to walk unsupported and a radiograph showed further thickening of the cortex of the residual femur without any stress shielding. Although having 5 cm of limb length discrepancy, the patient and her mother were satisfied with the function. The MSTS score was 24 out of 30 points. Repeated limb length extensions are planned.Conclusions: This case report provides an example of limb salvage surgery after distal femoral resection in a small child. The use of a temporary spacer utilizing partial cementation and preservation of the periosteum and induced membrane appears to afford a viable limb-salvage option after distal femoral resection for younger children.


2020 ◽  
Author(s):  
Tao Cai ◽  
Chunlin Zhang ◽  
Lei Zhang ◽  
Kunpeng Zhu ◽  
Jianping Hu ◽  
...  

Abstract Purpose The purpose of this study was to introduce the surgical technique and functional outcome of joint-sparing limb salvage surgery with metaphyseal osteotomy by dependent design of three-dimensional printed prothesis for children with osteosarcoma in distal femur.Methods Between 2012 to 2019, we performed twelve joint sparing limb salvage surgeries (JSLSS) with metaphyseal osteotomy for the children of osteosarcoma in the distal femur with our dependent design of 3D-printed guided plate and prothesis. The clinical assessment including resection margin, limb-length discrepancy, orthopaedic complications and functional outcome would be analyzed.Results The mean operation time for JSLSS was 107.6 minutes and the average blood loss was 194.5ml with the dependent design of 3D-printed prosthesis. With the assistance of guide plate, the mean margin of the osteosarcoma from the epiphyseal plate was 1.6 cm and the mean limb-length discrepancy was 2.2 cm with maximum follow-up period of seven years (mean 45.3 months, range 12-84 months). All the patients could bend their knee through >90° flexion, achieved similar results for ROMs in 6DOF during gait compared with normal data of Chinese knees, and the mean MSTS score was 94.7 for the patients with JSLSS. One patient had a superficial infection and there was one patient of local recurrence happened during the follow-up with the necrosis rate less than 90% by preoperative chemotherapy. None aseptic loosening happened in distal femur for the patients in this group with dependent design of 3D-printed prosthesis.Conclusion Joint-sparing limb salvage surgery by metaphyseal osteotomy with the dependent design of 3D-printed prosthesis and guide plate would be a good choice for the children with osteosarcoma in distal femur.


2020 ◽  
Vol 4 (2) ◽  
pp. 76
Author(s):  
Supratim Bhattacharyya ◽  
KP Kunhi Mohammed ◽  
PrafullaKumar Das ◽  
BharatBhusan Satpathy

Sign in / Sign up

Export Citation Format

Share Document