Nonlinear vibration analysis of coated blisks in the presence of stiffness mistuning identification

This paper aims to investigate nonlinear vibration characteristics of rotor system considering cogging and harmonic effects. Firstly, relative permeance with eccentric was established and then corrected by correction factor caused by the cogging effect. Based on the new formula of relative permeance, the expression of unbalanced magnetic force was obtained, and the coefficient of cogging effect was defined. Motion equations of rotor system were established, and Runge–Kutta method was used to solve the equations. Results showed that errors between finite and analytical results were smaller considering cogging and harmonic effects. When the harmonics were taken into consideration, the vibration of rotor increases sharply. When the cogging and harmonics were taken into consideration simultaneously, the vibration of rotor decreased instead, which means that stator slots have the effect of reducing vibration in rotor system. Rotor vibration was axis symmetry with static eccentricity rather than central symmetry with no eccentricity, and double, four times, and six times supply frequency always existed in the components of main frequency with eccentric.

Download Full-text

Nonlinear Vibration Analysis of an Elastic Rotor Supported on Angular Contact Ball Bearings Considering Six Degrees of Freedom and Waviness on Balls and Races

Journal of Vibration and Acoustics ◽

10.1115/1.4027712 ◽

2014 ◽

Vol 136 (4) ◽

Cited By ~ 15

Author(s):

C. K. Babu ◽

N. Tandon ◽

R. K. Pandey

Keyword(s):

Nonlinear Vibration ◽

Elastic Deformation ◽

Vibration Analysis ◽

Degrees Of Freedom ◽

Ball Bearings ◽

Rigid Rotor ◽

Six Degrees Of Freedom ◽

Extension Work ◽

Inner Race ◽

Rotor Model

Nonlinear vibration analysis of an elastically deformable shaft supported on two lubricated angular contact ball bearings is reported herein considering six-degrees of freedom (6-DOF) and waviness on races and balls. This is an extension work of the investigation published by the authors Babu, C. K., Tandon, N., and Pandey, R. K., 2012, “Vibration Modeling of a Rigid Rotor Supported on the Lubricated Angular Contact Ball Bearings Considering Six Degree of Freedom and Waviness on Balls and Races,” ASME J. Vib. Acoust., 134, p. 011006. Elastic deformation of shaft, frictional moment, and waviness on races and balls have been incorporated in the model for the vibration investigations of rotor's CG. Two noded 3D Timoshenko beam element having 6-DOF has been employed in the computation of the shaft's deformation. Governing equations with appropriate boundary conditions have been solved using 4th order Runge–Kutta method. It is observed that vibration amplitude enhances considerably after incorporating the elastic deformation in comparison to the amplitude achieved using rigid rotor model approach. Moreover, the influence of outer race's radial waviness is large on the amplitudes of vibrations in comparison to radial waviness of inner race. However, it is worth noting here that in case of rigid rotor model the presence of radial waviness on inner race yields high amplitudes of vibrations.

Download Full-text