Reynolds number effect on the response of a rough wall turbulent boundary layer to local wall suction

2021 ◽  
Vol 916 ◽  
Author(s):  
F. Ghanadi ◽  
L. Djenidi

Abstract

2018 ◽  
Vol 851 ◽  
pp. 1-22 ◽  
Author(s):  
L. Djenidi ◽  
K. M. Talluru ◽  
R. A. Antonia

This paper examines the Reynolds number ($Re$) dependence of a zero-pressure-gradient (ZPG) turbulent boundary layer (TBL) which develops over a two-dimensional rough wall with a view to ascertaining whether this type of boundary layer can become independent of $Re$. Measurements are made using hot-wire anemometry over a rough wall that consists of a periodic arrangement of cylindrical rods with a streamwise spacing of eight times the rod diameter. The present results, together with those obtained over a sand-grain roughness at high Reynolds number, indicate that a $Re$-independent state can be achieved at a moderate $Re$. However, it is also found that the mean velocity distributions over different roughness geometries do not collapse when normalised by appropriate velocity and length scales. This lack of collapse is attributed to the difference in the drag coefficient between these geometries. We also show that the collapse of the $U_{\unicode[STIX]{x1D70F}}$-normalised mean velocity defect profiles may not necessarily reflect $Re$-independence. A better indicator of the asymptotic state of $Re$ is the mean velocity defect profile normalised by the free-stream velocity and plotted as a function of $y/\unicode[STIX]{x1D6FF}$, where $y$ is the vertical distance from the wall and $\unicode[STIX]{x1D6FF}$ is the boundary layer thickness. This is well supported by the measurements.


2007 ◽  
Vol 570 ◽  
pp. 307-346 ◽  
Author(s):  
P. J. A. PRIYADARSHANA ◽  
J. C. KLEWICKI ◽  
S. TREAT ◽  
J. F. FOSS

The mean wall-normal gradients of the Reynolds shear stress and the turbulent kinetic energy have direct connections to the transport mechanisms of turbulent-boundary-layer flow. According to the Stokes–Helmholtz decomposition, these gradients can be expressed in terms of velocity–vorticity products. Physical experiments were conducted to explore the statistical properties of some of the relevant velocity–vorticity products. The high-Reynolds-number data (Rθ≃O(106), where θ is the momentum thickness) were acquired in the near neutrally stable atmospheric-surface-layer flow over a salt playa under both smooth- and rough-wall conditions. The low-Rθdata were from a database acquired in a large-scale laboratory facility at 1000 >Rθ> 5000. Corresponding to a companion study of the Reynolds stresses (Priyadarshana & Klewicki,Phys. Fluids, vol. 16, 2004, p. 4586), comparisons of low- and high-Rθas well as smooth- and rough-wall boundary-layer results were made at the approximate wall-normal locationsyp/2 and 2yp, whereypis the wall-normal location of the peak of the Reynolds shear stress, at each Reynolds number. In this paper, the properties of thevωz,wωyanduωzproducts are analysed through their statistics and cospectra over a three-decade variation in Reynolds number. Hereu,vandware the fluctuating streamwise, wall-normal and spanwise velocity components and ωyand ωzare the fluctuating wall-normal and spanwise vorticity components. It is observed thatv–ωzstatistics and spectral behaviours exhibit considerable sensitivity to Reynolds number as well as to wall roughness. More broadly, the correlations between thevand ω fields are seen to arise from a ‘scale selection’ near the peak in the associated vorticity spectra and, in some cases, near the peak in the associated velocity spectra as well.


Sign in / Sign up

Export Citation Format

Share Document