Probability of Debonding and Effective Elastic Properties of Particle-Reinforced Composites

2017 ◽  
Vol 33 (6) ◽  
pp. 789-796 ◽  
Author(s):  
L. C. Bian ◽  
W. Liu ◽  
J. Pan
Keyword(s):  
Elastic Properties ◽  
Effective Properties ◽  
Effective Elastic Modulus ◽  
Reinforced Composites ◽  
Effective Elastic Properties ◽  
Linear Elastic ◽  
Mechanics Model ◽  
Equivalent Inclusion ◽  
Particle Reinforced Composites ◽  
Good Agreement

AbstractIn this paper, the effective properties of particle-reinforced composites with a weakened interphase are investigated. The particle and interphase are regarded as an equivalent-inclusion, and the interphase zone around the particle is modeled as a linear elastic spring layer. A modified micro-mechanics model is proposed to obtain the effective elastic modulus. Moreover, a statistical debonding criterion is proposed to characterize the varying probability of the evolution of interphase debonding. Numerical examples are considered to illustrate the effect of imperfect interphases on the effective properties of particle-reinforced composites. It is found that the effective elastic properties obtained in the present work are in a good agreement with the existing data from the literatures.

Determination of effective properties of granite rock: A numerical investigation

MRS Advances ◽  
2018 ◽  
Vol 3 (37) ◽  
pp. 2159-2168
Author(s):  
Rehema Ndeda ◽  
S. E. M Sebusang ◽  
R. Marumo ◽  
Erich O. Ogur
Keyword(s):  
Elastic Properties ◽  
Close Agreement ◽  
Effective Properties ◽  
Volume Element ◽  
The Finite Element Method ◽  
Effective Elastic Properties ◽  
Spherical Inclusions ◽  
Periodic Microstructures ◽  
Crack Profile

ABSTRACTMacroscopic strength of the rock depends on the behavior of the micro constituents, that is, the minerals, pores and crack profile. It is important to determine the effect of these constituents on the overall behavior of the rock. This study seeks to estimate the effective elastic properties of granite using the finite element method. A representative volume element (RVE) of suitable size with spherical inclusions of different distribution is subjected to loading and the effective elastic properties determined. The results are compared to those obtained from analytical methods. The elastic properties are obtained in both the axial and transverse direction to account for anisotropy. It is observed that there is congruence in the results obtained both analytically and numerically. The method of periodic microstructures exhibits close agreement with the numerical results.

Micromechanics-based analyses of short fiber-reinforced composites with functionally graded interphases

2019 ◽  
Vol 54 (8) ◽  
pp. 1031-1048 ◽  
Author(s):  
Yang Yang ◽  
Qi He ◽  
Hong-Liang Dai ◽  
Jian Pang ◽  
Liang Yang ◽  
...  
Keyword(s):  
Aspect Ratio ◽  
Elastic Properties ◽  
Effective Properties ◽  
Micromechanical Model ◽  
Short Fiber ◽  
Functionally Graded ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
The Matrix

A micromechanical model for short fiber-reinforced composites (SFRCs) with functionally graded interphases and a systematic prediction scheme to determine the effective properties are presented. The matrix and the fibers are regarded to be linear elastic, isotropic, and homogeneous. Fibers are assumed to be ellipsoids coated perfectly by functionally graded interphases, which is supposed to be formed chemically or physically by the constituents near the interface. First, to analyze the grading interphase effect, layer-wise concept is followed to divide the functionally graded interphases into multi-homogeneous sub-layers. Next, to take the effect of functionally graded interphases into account, a combination of multi-inclusion method and Mori–Tanaka method is applied to predict effective elastic properties of this unidirectional SFRCs with respect to the content and aspect ratio of the inclusions. By employing coordinate transformation, spatially elastic moduli are obtained. Finally, Voigt homogenization scheme is used to obtain the overall, averaged, symmetrical elastic properties of the SFRCs. Numerical examples and analyses demonstrate the applicability of the proposed method and indicate the influences of graded interphase, orientation, and aspect ratio of inclusions as well as properties and contents of the constituents on the overall properties of SFRCs.

Digital rock physics and laboratory considerations on a high-porosity volcanic rock

2020 ◽  
Author(s):  
Laura L. Schepp ◽  
Benedikt Ahrens ◽  
Martin Balcewicz ◽  
Mandy Duda ◽  
Mathias Nehler ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Elastic Properties ◽  
Effective Properties ◽  
Rock Physics ◽  
Numerical Results ◽  
High Porosity ◽  
Effective Elastic Properties ◽  
Digital Rock Physics ◽  
Digital Rock ◽  
Laboratory Investigations

<p>Microtomographic imaging techniques and advanced numerical simulations are combined by digital rock physics (DRP) to obtain effective physical material properties. The numerical results are typically used to complement laboratory investigations with the aim to gain a deeper understanding of physical processes related to transport (e.g. permeability and thermal conductivity) and effective elastic properties (e.g. bulk and shear modulus). The present study focuses on DRP and laboratory techniques applied to a rock called reticulite, which is considered as an end-member material with respect to porosity, stiffness and brittleness of the skeleton. Classical laboratory investigations on effective properties, such as ultrasonic transmission measurements and uniaxial deformation experiments, are very difficult to perform on this class of high-porosity and brittle materials.</p><p>Reticulite is a pyroclastic rock formed during intense Hawaiian fountaining events. The open honeycombed network has a porosity of more than 80 % and consists of bubbles that are supported by glassy threads. The natural mineral has a strong analogy to fabricated open-cell foams. By comparing experimental with numerical results and theoretical estimates we demonstrate the potential of digital material methodology with respect to the investigation of porosity, effective elastic properties, thermal conductivity and permeability</p><p>We show that the digital rock physics workflow, previously applied to conventional rock types, yields reasonable results for a high-porosity rock and can be adopted for fabricated foam-like materials. Numerically determined effective properties of reticulite are in good agreement with the experimentally determined results. Depending on the fields of application, numerical methods as well as theoretical estimates can become reasonable alternatives to laboratory methods for high porous foam-like materials.</p>

Sign in / Sign up

Export Citation Format

Share Document