We analyze data from two orthogonal seismic lines 336 m in length collected at Piñon Flat, California, over weathered granodiorite bedrock. Each line was made up of 10 reversed segments 84 m in length. We analyzed the first arrivals from these data and found dramatic variations in velocity along the profiles. An upper layer (approximately 2-m thick) known from trenching to be composed of soil and sandy grus had measured velocities ranging from 400 to 700 m/s. Velocities inferred from refraction analysis of first arrivals of the reversed lines revealed a heterogeneous lower layer below the soil with measured velocities of 1600–2700 m/s by a depth of 15 m. We interpret these data to be measuring velocities of a deeply weathered unit characterized by granodiorite corestones embedded in a matrix of saprolite. The most remarkable feature of these data emerged from attempting to process the same data as reflection data. Simple bandpass filtering in the 250–400 Hz band revealed a bright, impulsive arrival with three characteristic properties: (1) irregular velocity moveout that is inconsistent with that expected from a layered earth model, (2) the arrival is at a nearly constant time‐depth on all data, and (3) the arrival tends to be followed by a ringing coda whose frequency varies from trace to trace. This arrival ties exactly with a velocity discontinuity measured in a borehole located on one of the profiles that we interpret as the base of the weathered layer. We suggest this arrival is a specular reflection from a weathering front that occurs along horizontal sheeting joints at a fixed depth below the surface. This surface acts as an effective mirror for high‐frequency seismic waves which are then channeled upward through an intact, high-Q path of unaltered blocks of granodiorite to define the observed signals at the surface.
Earthquakes Ripple Through 3D Printed Models of Los Angeles
