The effect of different alkyl chains on the photovoltaic performance of D–π–A porphyrin-sensitized solar cells

2015 ◽  
Vol 39 (5) ◽  
pp. 3736-3746 ◽  
Author(s):  
Jiangzhao Chen ◽  
Songguk Ko ◽  
Linfeng Liu ◽  
Yusong Sheng ◽  
Hongwei Han ◽  
...  

Compared to the DSSCs based on WH-C1 and YD20 with short alkyl chains, the device sensitized by WH-C2 with the hexyloxy group shows a significantly enhanced Voc, Jsc and power conversion efficiency (η).

RSC Advances ◽  
2017 ◽  
Vol 7 (53) ◽  
pp. 33106-33112 ◽  
Author(s):  
Ikhtisham Mehmood ◽  
Yueli Liu ◽  
Keqiang Chen ◽  
Abdul Hakim Shah ◽  
Wen Chen

This paper explores that novel architecture of CuInSe2/Mn-CdS exhibits remarkable enhancement in photovoltaic performance of the QDSSCs, which presents an excellent power conversion efficiency of 3.96%.


Author(s):  
Canpu Yang ◽  
Peng Song ◽  
Reda El-Shishtawy ◽  
Fengcai Ma ◽  
Yuanzuo Li

To explore high efficiency dye-sensitized solar cells (DSSCs), two experimentally derived (single fence and double fence porphyrins) and two theoretically designed zinc porphyrin molecules with D-D-π-A-A configurations were studied. Density...


2014 ◽  
Vol 2 (29) ◽  
pp. 11229-11234 ◽  
Author(s):  
Xiongwu Kang ◽  
Junxiang Zhang ◽  
Anthony J. Rojas ◽  
Daniel O'Neil ◽  
Paul Szymanski ◽  
...  

A D–A–π–A′ dye for dye-sensitized solar cells was synthesized via sequential C–H direct arylation; the photovoltaic performance was enhanced by deposition of additional dye on TiO2


2014 ◽  
Vol 633 ◽  
pp. 39-44
Author(s):  
Quan Tong Li ◽  
J. Zhang ◽  
S.Q. Li ◽  
J. Xie ◽  
Hao Wang

In this work, highly-ordered TiO2 nanotubes arrays were fabricated by two-step anodic oxidation method to serve as photoanodes for dye-sensitized solar cells. We investigated the effect of TiCl4 treatment on the microstructure and morphologies of TiO2 nanotubes arrays. It is found that the TiCl4 treatment can generally introduce 10-15 nm TiO2 nanoparticles into the TiO2 nanotube arrays. The photovoltaic performance of dye-sensitized solar cells is related to the concentration and treated-time of TiCl4 treatment. A power conversion efficiency of 7.63% was achieved for dye-sensitized solar cell with photoanode treated by 0.04 M TiCl4 for 60min. The improved power conversion efficiency can be attributed to the increased available surface for dye adsorption in photoanodes.


2015 ◽  
Vol 39 (4) ◽  
pp. 2889-2900 ◽  
Author(s):  
Jiangzhao Chen ◽  
Songguk Ko ◽  
Linfeng Liu ◽  
Yusong Sheng ◽  
Hongwei Han ◽  
...  

Compared with WH-C3 and WH-C4, the WH-C5-sensitized device shows a significantly enhanced Voc, Jsc and power conversion efficiency (η).


2021 ◽  
Vol 11 (3) ◽  
pp. 674-678
Author(s):  
Shibing Zou ◽  
Lingting Song ◽  
Junhong Duan ◽  
Le Huang ◽  
Weiqing Liu ◽  
...  

2015 ◽  
Vol 19 (01-03) ◽  
pp. 175-191 ◽  
Author(s):  
Ganesh D. Sharma ◽  
Galateia E. Zervaki ◽  
Kalliopi Ladomenou ◽  
Emmanuel N. Koukaras ◽  
Panagiotis P. Angaridis ◽  
...  

Two porphyrin dyads with the donor-π-acceptor molecular architecture, namely ( ZnP )-[triazine-gly]-( H 2 PCOOH ) and ( ZnP )-[triazine-Npip]-( H 2 PCOOH ), which consist of a zinc-metalated porphyrin unit and a free-base porphyrin unit covalently linked at their peripheries to a central triazine group, substituted either by a glycine in the former or a N-piperidine group in the latter, have been synthesized via consecutive amination substitution reactions of cyanuric chloride. The UV-vis absorption spectra and cyclic-voltammetry measurements of the two dyads, as well as theoretical calculations based on Density Functional Theory, suggest that they have suitable frontier orbital energy levels for use as sensitizers in dye-sensitized solar cells. Dye-sensitized solar cells based on ( ZnP )-[triazine-gly]-( H 2 PCOOH ) and ( ZnP )-[triazine-Npip]-( H 2 PCOOH ) have been fabricated, and they were found to exhibit power conversion efficiency values of 5.44 and 4.15%, respectively. Photovoltaic measurements (J–V curves) and incident photon to current conversion efficiency spectra of the two solar cells suggest that the higher power conversion efficiency value of the former solar cell is a result of its enhanced short circuit current, open circuit voltage, and fill factor values, as well as higher dye loading. This is ascribed to the existence of two carboxylic acid anchoring groups in ( ZnP )-[triazine-gly]-( H 2 PCOOH ), compared to one carboxylic acid group in ( ZnP )-[triazine-Npip]-( H 2 PCOOH ), which leads to a more effective binding onto the TiO 2 photoanode. Electrochemical impedance spectra show evidence that the ( ZnP )-[triazine-gly]-( H 2 PCOOH ) based solar cell exhibits a longer electron lifetime and more effective suppression of charge recombination reactions between the injected electrons and electrolyte.


Sign in / Sign up

Export Citation Format

Share Document