Power imbalance estimation in distribution networks with renewable energy resources

Author(s):  
V. Terzija ◽  
M. Kayikci ◽  
Deyu Cai
Author(s):  
Bilal Naji Alhasnawi ◽  
Basil H. Jasim ◽  
Zain-Aldeen S. A. Rahman ◽  
Josep M. Guerrero ◽  
M. Dolores Esteban

The increasing integration of Renewable Energy Resources (RERs) in distribution networks forms the Networked Renewable Energy Resources (NRERs). The cooperative Peer-to-Peer (P2P) control architecture is able to fully exploit the resilience and flexibility of NRERs. This study proposes a multi-agent system to achieve P2P control of NRERs based Internet of Things (IoT). The control system is fully distributed and contains two control layers operated in the agent of each RER. For primary control, a droop control is adopted by each RER-agent for localized power sharing. For secondary control, a distributed diffusion algorithm is proposed for arbitrary power sharing among RERs. The proposed levels communication system is implemented to explain the data exchange between the distribution network system and the cloud server. The local communication level utilizes the Internet Protocol (IP)/Transmission Control Protocol (TCP), and Message Queuing Telemetry Transport (MQTT) is used as the protocol for the global communication level. The effectiveness of the proposed system is validated by numerical simulation with the modified IEEE 9 node test feeder. The controller proposed in this paper achieved savings of 20.65% for the system, 25.99% for photovoltaic, 35.52 for diesel generator, 24.59 for batteries, and 52.34% for power loss.


2019 ◽  
Vol 8 (4) ◽  
pp. 1884-1889

As the issue of global warming is worsening, the shift towards using renewable energy resources is becoming more of an obligation rather than an option. With the continual decline in the cost of distributed small and medium-scale renewables and government sponsored programs, the outlook of growth of these converter-based resources remain high. Renewable energy resources are connected at the end-user terminals, in close proximity to the load at the distribution network. Such connection in the locale brings perceived benefits of transmission loss reduction, increased energy efficiency and improved voltage regulation. Yet, distributed renewable generation have noticeable effects on system’s power quality. This paper investigates the impacts of distributed wind generation on the voltage sag of distribution systems. A systematic approach is constructed to capture voltage sag occurrence incidents, due to wind generation connected at distribution nodes, and trigger the dynamic voltage restorer (DVR) into active operation mode to rectify the voltage sag problem. A test feeder system is represented using MATLAB/Simulink with wind turbines connected at several nodes of the system. A model for the DVR is developed in Simulink. It was then integrated with the test feeder system. Simulation results show that the incorporation of increased proportions of wind generation into the distribution network may give rise to negative operating conflicts as far as the voltage sag is concerned. Results manifest that the DVR is capable of effective correction of the voltage sag, caused by a three phase short-circuit fault, in presence of high penetration levels of variable wind generation connected at disparate locations in the distribution network.


2021 ◽  
pp. 281-327
Author(s):  
Rayees Ahmad Thokar ◽  
Vipin Chandra Pandey ◽  
Nikhil Gupta ◽  
K. R. Niazi1 ◽  
Anil Swarnkar ◽  
...  

In conventional power system the transmission and distribution (T&D) losses is a major concern. Renewable energy resources placed at load centers can reduce the T&D losses. For power system planners and researchers it is essential to find the optimal size and position of renewable energy resources to be place in distribution networks. Renewable energy source such as solar energy is abundantly present in the environment. With the help of solar photovoltaic (SPV) system solar energy can be converted to electrical energy. Placement of SPV in distribution system is an interesting area for researchers and planners, the random placement of SPV in distribution system leads to more power losses and poor voltage profile. In this article mathematical modelling of time varying nature of SPV and variable load has been explained and particle swarm optimization (PSO) method is proposed to find the best size and location of the SPV system. This method is tested on IEEE 33 bus system. For the validation of result existing technique based on analytical expression is selected. It is found that PSO gives better result in compare to analytical method.


Sign in / Sign up

Export Citation Format

Share Document