Effect of bipolar radiofrequency energy on human articular cartilage

2001 ◽  
Vol 17 (2) ◽  
pp. 117-123 ◽  
Author(s):  
Yan Lu ◽  
Ryland B. Edwards ◽  
Vicki L. Kalscheur ◽  
Shane Nho ◽  
Brian J. Cole ◽  
...  
2005 ◽  
Vol 33 (7) ◽  
pp. 1035-1039 ◽  
Author(s):  
Sean Caffey ◽  
Edward McPherson ◽  
Brian Moore ◽  
Thomas Hedman ◽  
C. Thomas Vangsness

Background Previous radiofrequency work has not rigidly controlled energy application to the articular cartilage, giving uncertain results published to date. Hypothesis At minimal settings, radiofrequency probes cause cell death in measurable areas when applied to human articular cartilage. Study Design Controlled laboratory study. Methods Simulating operating room conditions, 5 commercially available radiofrequency probes were attached to a customized jig to standardize a minimal contact pressure of each probe tip to 2.0 g. Keeping all variables the same, probes were placed on specific points of fresh grade II human cartilage with treatment times of 1 and 3 seconds at the manufacturer's recommended settings. Grade III cartilage was also tested with a treatment time of 3 seconds, and grade II cartilage was studied with the probe held 1 mm off the cartilage surface. Cartilage was blindly analyzed by confocal microscopy using a live/dead cell viability assay to determine the extent of cell death. Results Radiofrequency probes produced significant cellular death in the form of a half-circle into the cartilage to variable depths. For treatment times of 1 and 3 seconds, cell death measurements ranged from 404 to 539 μm and 1034 to 1283 μm, respectively. One probe failed to show any effect, with minimal evidence of cell death or cartilage smoothing. When probes were kept a 1.0-mm distance above the cartilage, no cell death or cartilage smoothing was noted. Radiofrequency treatment of grade III cartilage penetrated to the subchondral bone. There was no statistically significant difference between the damage caused by monopolar and bipolar probes when tested under these rigidly controlled conditions. Conclusion These results showed significant cellular death at these minimal conditions to the underlying chondrocytes with radiofrequency probes. Surgeons using this technology need to be aware of the power and dangerous potential these probes can have on articular cartilage.


2006 ◽  
Vol 34 (8) ◽  
pp. 1322-1327 ◽  
Author(s):  
Ko Yasura ◽  
Yasuaki Nakagawa ◽  
Masahiko Kobayashi ◽  
Hiroshi Kuroki ◽  
Takashi Nakamura

2020 ◽  
Author(s):  
Liangquan Peng ◽  
Yusheng Li ◽  
Kai Zhang ◽  
Qi Chen ◽  
Lulu Xiao ◽  
...  

Abstract Purpose: The purpose of this study was to compare the effect of bipolar radiofrequency energy (bRFE) on chondroplasty at the different time durations in an in vitro experiment that simulated an arthroscopic procedure. Methods: Six fresh bovine knees were used in our study. Six squares were marked on both the medical and lateral femoral condyles of each femur. Each square was respectively treated with bRFE for 0s, 10s, 20s, 30s, 40s and 50s. Full-thickness articular cartilage specimens were harvested from the treatment areas. Each specimen was divided into three distinct parts: one for hematoxylin/eosin staining histology, another for cartilage surface contouring assessment via scanning electron microscopy (SEM), and the last one for glycosaminoglycan (GAG) content measurement. Results: bRFE caused time-correlated damage to chondrocytes, and GAG content in the cartilage was negatively correlated to exposure time. bRFE caused time-correlated damage to chondrocytes. The GAG content in the cartilage negatively correlated with the exposure time. The sealing effect positively correlated with the exposure time. Additionally, it took at least 20 seconds of radiofrequency exposure to render a smooth cartilage surface and a score of 2 (normal) in the scoring system used. Conclusion: bRFE usage in chondroplasty could effectively trim and polish the cartilage lesion area; however, it induces a dose-dependent detrimental effect on chondrocytes and metabolic activity that negatively correlated with the treatment time. Therefore, cautions should be taken in the use of bRFE for treatment of articular cartilage injury.


2012 ◽  
Vol 134 (8) ◽  
Author(s):  
Nicholas Dutcheshen ◽  
Tristan Maerz ◽  
Patrick Rabban ◽  
Roger C. Haut ◽  
Keith D. Button ◽  
...  

Radio frequency energy (RFE) thermal chondroplasty has been a widely-utilized method of cartilage debridement in the past. Little is known regarding its effect on tissue mechanics. This study investigated the acute biomechanical effects of bipolar RFE treatment on human chondromalacic cartilage. Articular cartilage specimens were extracted (n = 50) from femoral condyle samples of patients undergoing total knee arthroplasty. Chondromalacia was graded with the Outerbridge classification system. Tissue thicknesses were measured using a needle punch test. Specimens underwent pretreatment load-relaxation testing using a spherical indenter. Bipolar RFE treatment was applied for 45 s and the indentation protocol was repeated. Structural properties were derived from the force-time data. Mechanical properties were derived using a fibril-reinforced biphasic cartilage model. Statistics were performed using repeated measures ANOVA. Cartilage thickness decreased after RFE treatment from a mean of 2.61 mm to 2.20 mm in Grade II, II-III, and III specimens (P < 0.001 each). Peak force increased after RFE treatment from a mean of 3.91 N to 4.91 N in Grade II and III specimens (P = 0.002 and P = 0.003, respectively). Equilibrium force increased after RFE treatment from a mean of 0.236 N to 0.457 N (P < 0.001 each grade). Time constant decreased after RFE treatment from a mean of 0.392 to 0.234 (P < 0.001 for each grade). Matrix modulus increased in all specimens following RFE treatment from a mean 259.12 kPa to 523.36 kPa (P < 0.001 each grade). Collagen fibril modulus decreased in Grade II and II-III specimens from 60.50 MPa to 42.04 MPa (P < 0.001 and P = 0.005, respectively). Tissue permeability decreased in Grade II and III specimens from 2.04 *10−15 m4/Ns to 0.91 *10−15 m4/Ns (P < 0.001 and P = 0.009, respectively). RFE treatment decreased thickness, time constant, fibril modulus, permeability, but increased peak force, equilibrium force, and matrix modulus. While resistance to shear and tension could be compromised due to removal of the superficial layer and decreased fibril modulus, RFE treatment increases matrix modulus and decreases tissue permeability which may restore the load- bearing capacity of the cartilage.


Sign in / Sign up

Export Citation Format

Share Document