scholarly journals The dorsal skinfold chamber as Tympanic membrane model

2021 ◽  
Author(s):  
C Lachmann ◽  
D Strüder ◽  
SM Van Bonn ◽  
B Vollmar ◽  
R Mlynski
1997 ◽  
Author(s):  
Benedikt W. Sedlmaier ◽  
Alexander Bloedow ◽  
Sergije Jovanovic

2021 ◽  
pp. 1-15
Author(s):  
Daniel Strüder ◽  
Christoph Lachmann ◽  
Sara Maria van Bonn ◽  
Eberhard Grambow ◽  
Sebastian P. Schraven ◽  
...  

<b><i>Background:</i></b> Tympanic membrane perforations (TMPs) are a common complication of trauma and infection. Persisting perforations result from the unique location of the tympanic membrane. The wound is surrounded by air of the middle ear and the external auditory canal. The inadequate wound bed, growth factor, and blood supply lead to circular epithelialization of the perforation’s edge and premature interruption of defect closure. Orthotopic animal models use mechanical or chemical tympanic membrane laceration to identify bioactive wound dressings and overcome premature epithelialization. However, all orthotopic models essentially lack repetitive visualization of the biomaterial-wound interface. Therefore, recent progress in 3D printing of customized wound dressings has not yet been transferred to the unique wound setup of the TMP. Here, we present a novel application for the mice dorsal skinfold chamber (DSC) with an epithelialized full-thickness defect as TMP model. <b><i>Methods:</i></b> A circular 2-mm defect was cut into the extended dorsal skinfold using a biopsy punch. The skinfold was either perforated through both skin layers without prior preparation or perforated on 1 side, following resection of the opposing skin layer. In both groups, the wound was sealed with a coverslip or left unclosed (<i>n</i> = 4). All animals were examined for epithelialization of the edge (histology), size of the perforation (planimetry), neovascularization (repetitive intravital fluorescence microscopy), and inflammation (immunohistology). <b><i>Results:</i></b> The edge of the perforation was overgrown by the cornified squamous epithelium in all pre­parations. Reduction in the perforation’s size was enhanced by application of a coverslip. Microsurgical preparation before biopsy punch perforation and sealing with a coverslip enabled repetitive high-quality intravital fluorescence microscopy. However, spontaneous reduction of the perforation occurred frequently. Therefore, the direct biopsy punch perforation without microsurgical preparation was favorable: spontaneous reduction did not occur throughout 21 days. Moreover, the visualization of the neovascularization was sufficient in intravital microscopy. <b><i>Conclusions:</i></b> The DSC full-thickness defect is a valuable supplement to orthotopic TMP models. Repetitive intravital microscopy of the epithelialized edge enables investigation of the underlying pathophysiology during the transition from the inflammation to the proliferation phase of wound healing. Using established analysis procedures, the present model provides an effective platform for the screening of bioactive materials and transferring progress in tissue engineering to the special conditions of tympanic membrane wound healing.


2000 ◽  
Vol 21 (3) ◽  
pp. 322-328 ◽  
Author(s):  
T ZAHNERT ◽  
K HUTTENBRINK ◽  
D MURBE ◽  
M BORNITZ

Author(s):  
Byeong Jin Kim ◽  
Jae-Ryong Kim ◽  
Woo Kil Park ◽  
Kyung Wook Heo
Keyword(s):  

1994 ◽  
Vol 22 (2) ◽  
pp. 99-120 ◽  
Author(s):  
T. B. Rhyne ◽  
R. Gall ◽  
L. Y. Chang

Abstract An analytical membrane model is used to study how wheel imperfections are converted into radial force variation of the tire-wheel assembly. This model indicates that the radial run-out of the rim generates run-out of the tire-wheel assembly at slightly less than the one to one ratio that was expected. Lateral run-out of the rim is found to generate radial run-out of the tire-wheel assembly at a ratio that is dependent on the tire design and the wheel width. Finite element studies of a production tire validate and quantify the results of the membrane model. Experiments using a specially constructed precision wheel demonstrate the behavior predicted by the models. Finally, a population of production tires and wheels show that the lateral run-out of the rims contribute a significant portion to the assembly radial force variation. These findings might be used to improve match-mounting results by taking lateral rim run-out into account.


2018 ◽  
Vol 60 (3) ◽  
pp. 67 ◽  
Author(s):  
Şefik Güran ◽  
Zehra Dilşad Çoban ◽  
Orhan Fermanlı ◽  
Emre Aydıngöz ◽  
Emre İpek

1987 ◽  
Vol 16 (3) ◽  
pp. 159-166
Author(s):  
Konrád S. Konrádsson ◽  
Alf Ivarsson ◽  
Graham Bank

Sign in / Sign up

Export Citation Format

Share Document