scholarly journals Surgical Technique of Supine Percutaneous Nephrolithotomy in Children

2021 ◽  
Vol 30 (04) ◽  
pp. e300-e303
Author(s):  
Stefania Prada ◽  
Nicolas Fernandez ◽  
Julián Chavarriaga ◽  
Jaime Perez ◽  
Hugo López-Ramos

AbstractPercutaneous nephrolithotomy (PCNL) in children has become more widely used due to its high efficacy and safety and to the development of miniaturized instruments. A supine approach is promising due to advantages such as better ventilation, reproducibility, and ergonomics. The purpose of the present study is to describe our surgical technique with special considerations in the pediatric population. We used an oblique supine position supported by one silicone gel positioning pad under the hip and another under the ipsilateral flank. The anatomical landmarks used to guide the puncture were the 11th and 12th ribs, the posterior axillary line, and the iliac crest. Initially, a ureteral catheter was introduced endoscopically. A retrograde pyelography was performed to guide the puncture, which was performed using a biplanar technique. A hydrophilic guide wire was then advanced through the needle. Dilation was performed with Alken telescopic dilators until 14 Ch. Fragmentation was performed either with a 13 Ch semirigid cystoscope or a flexible ureteroscope using a holmium: yttrium aluminum garnet (Ho:Yag) laser. We left a double J catheter. Supine PCNL in the pediatric population has comparable efficacy in terms of stone free rate to that of the prone approach as well as less complications. Certain considerations in children are careful padding and placement of the patient close to the edge of the table. Puncture should be guided by ultrasound to reduce radiation exposure. Miniaturized equipment is not widely available, so adaptation of adult equipment for the pediatric population is sometimes necessary.

2012 ◽  
Vol 38 (2) ◽  
pp. 74-79
Author(s):  
Esat Kaan Akbay ◽  
Burak Turna ◽  
Servet Celik ◽  
Emil Mukhtarov ◽  
Ahmet Baris Altay ◽  
...  

2019 ◽  
Vol 4 (4) ◽  
pp. 2473011419S0041
Author(s):  
Kristen L. Stupay ◽  
Jorge Briceno ◽  
Brian Velasco ◽  
John Y. Kwon

Category: Ankle, Hindfoot Introduction/Purpose: Operative management of displaced intra-articular calcaneus fractures frequently involves placement of P: A screws in order to maintain calcaneal length and axial alignment. While plate fixation may still be more commonly utilized, screw-only fixation for the treatment of these fractures has been demonstrated by several authors to be safe and effective. Directing fixation from the tuber into the anterior process can be challenging. Understanding the calcaneal long-axis as it relates to the long-axis of the foot, a measurement we call the Tuber-to-Anterior Process Angle (TAPA), can facilitate the ease and accuracy of guide-wire and cannulated screw placement. The goals of this study are to define the TAPA, and to report a surgical technique which uses this angle to facilitate axial screw placement. Methods: Eight cadaver feet were utilized. A longitudinal pin was placed from the center of the posterior calcaneal tuber to the 2nd metatarsal heads. Next, the calcaneocuboid joint was exposed, and a wedge of cuboid was removed. A calcaneal pin was then placed, exiting at the center of the anterior process. The tips of two small K-wires were impacted into the medial and lateral-most aspects of the articular surface. A true axial view of each specimen was obtained. On these images, a digital line was drawn from the posterior tuber starting point and the central calcaneal pin, representing the calcaneal long-axis. The angle subtended by this line and the long-axis of the foot represents the TAPA. Digital lines were drawn between the posterior tuber starting point and the medial and lateral K-wires, and the range between their subtending angles represents the axial plane tolerance for screw placement within the anterior process. Results: The average TAPA measured 10.9 ± 1.3 degrees (range: 8.4-13.0). The average angle, as measured to the medial extent of the anterior calcaneus, measured 2.8 ± 1.3 degrees (range: 0.4-4.3). The average angle, as measured to the lateral extent of the anterior calcaneus, measured 19.0 ± 2.7 degrees (range: 15.7-22.7). Conclusion: Knowledge of the Tuber-to-Anterior Process Angle (TAPA), found to be 10.9 degrees (± 1.8 degrees) laterally deviated from the long-axis of the foot, simplifies placement of posterior-to-anterior screws in the calcaneus. Understanding this relationship reduces reliance on intraoperative axial fluoroscopy and increases operative efficiency. Furthermore, this knowledge can be applied during other procedures in which axial screw placement is performed, such as with corrective calcaneal osteotomy.


2016 ◽  
Vol 4 (3) ◽  
pp. 41-44
Author(s):  
I.A. Aboyan ◽  
◽  
S.V. Grachev ◽  
S.M. Pakus ◽  
D.I. Pakus ◽  
...  

2008 ◽  
Vol 22 (2) ◽  
pp. 273-276 ◽  
Author(s):  
Pascal Mouracade ◽  
Romain Spie ◽  
Herve Lang ◽  
Didier Jacqmin ◽  
Christian Saussine

Sign in / Sign up

Export Citation Format

Share Document