Cylindrical Cavity Expansion from a Finite Radius

Author(s):  
Haiying Huang ◽  
Emmanuel Detournay
2013 ◽  
Vol 634-638 ◽  
pp. 2781-2786 ◽  
Author(s):  
Zhi Gang Jiang ◽  
Dian Yi Song ◽  
Fei Liu

A finite cylindrical cavity expansion model for metal targets was proposed in consideration of the lateral free boundary and strain-hardening effect. Analytical solutions of radial pressure on the cavity wall were obtained. An engineering model for the penetration of rigid sharp-nosed projectiles into thick cylindrical metal targets with finite radius was developed. The influence of the radius ratio of target to projectile on penetration depth was studied. The present engineering model has good agreement with ballistic experiments and numerical simulation. The influence of the lateral free boundary of target on penetration depth needs to be considered for radius ratio of target to projectile less than 20.


2021 ◽  
pp. 204141962110272
Author(s):  
Chaomei Meng ◽  
Dianyi Song ◽  
Qinghua Tan ◽  
Zhigang Jiang ◽  
Liangcai Cai ◽  
...  

Cellular steel-tube-confined concrete (CSTCC) targets show improved anti-penetration performance over single-cell STCC targets due to the confinement effect of surrounding cells on the impacted cell. Dynamic finite cylindrical cavity-expansion (FCCE) models including radial confinement effect were developed to predict the depth of penetration (DOP) for CSTCC targets normally penetrated by rigid sharp-nosed projectiles, and stiffness of radial confinement was achieved with the elastic solution of infinite cylindrical shell in Winkler medium. Steady responses of dynamic FCCE models were obtained on the assumption of incompressibility of concrete, failure of comminuted zone with Heok–Brown criterion and two possible response modes of the confined concrete in the impacted cell. Furthermore, a DOP model for CSTCC targets normally impacted by rigid projectiles was also proposed on the basis of the dynamic FCCE approximate model. Lastly, relevant penetration tests of CSTCC targets normally penetrated by 12.7 mm armor piecing projectile (APP) were taken as examples to validate the dynamic FCCE models and the corresponding DOP model. The results show that the DOP results based on dynamic FCCE model agree well with those of the CSTCC targets normally penetrated by rigid conical or other sharp-nosed projectiles.


Sign in / Sign up

Export Citation Format

Share Document