In this work, a bow thruster is proposed to be used onboard small and medium-size watercraft, like motor yachts, fishing boats, patrol boats, ocean exploration vessels etc. with conventional or unconventional hull designs including displacement hull, planing hull, catamarans, SWATHs, SES, and so on. As oftentimes the case, a magnetic coupling is employed. Specifically, magnetic coupling is used to transfer torque from a brushless motor’s stator to its rotor through a magnetic field rather than a physical mechanical connection. Such magnetic coupling is very convenient for liquid pumps and as, in our case, propeller systems, since a static, physical barrier can be placed between the stationary and rotating part of the system to separate the fluid from the electrically supplied stator operating in air. Therefore, magnetic couplings preclude the use of shaft seals, which eventually wear out and fail from the sliding of two surfaces against each other. In this work, a system identification process of a rim driven bow thruster is implemented employing data series obtained by tests on a prototype scale model. System Identification leads to a black-box model of the system. The model derived can be extrapolated by grey-box modeling techniques for further design improvements. A control system for the proposed thruster is developed and validated through both computer and hardware-in-the-loop simulation, after its implementation onboard a broadly used industrial Programmable Logic Controller (PLC). The mathematical model of the bow thruster mechanism is developed and the performance is analysed by using Matlab/Simulink.
LPV system identification for control using the local approach
