The Analyses of 45-Degree Bunsen Burner Test and Oil Burner Test for Cargo Liners

§ 1. In § 10 of our paper “On Electrical Properties of Fumes proceeding from Flames and Burning Charcoal,” communicated to this Society on 5th April, results of observations on the leakage between two parallel metal plates with an initial difference of electric potential of 6·2 volts between them, when the fumes from flames and burnings were allowed to pass between them and round them, were given. The first part (§§ 1–4) of the present short paper gives results of observations on the leakage between two copper plates 1 centimetre apart, when one of them is kept at a constant high positive or negative potential; and the other, after being metallically connected with the electrometer-sheath, is disconnected, and left to receive electricity through fumes between the two.The method of observation (see fig. 1) was as follows:—Two copper plates were fixed in a block of paraffin at the top of a round tinned iron funnel 96 centimetres long and 15·6 centimetres internal diameter. A spirit-lamp or a Bunsen burner, the only two flames used in these experiments, was placed at the bottom of the funnel, 86 centimetres below the two copper plates. One terminal of a voltaic battery was connected to one plate, B, and the other terminal was connected to the sheath of a Kelvin quadrant electrometer. The other copper plate was connected to one of the pair of quadrants of the electrometer in such a way that by pulling a silk cord with a hinged platinum wire at its end, this copper plate and this pair of quadrants could be insulated from the sheath of the electrometer and the rest of the apparatus.

Download Full-text

Investigations of Gaseous Alternative Fuels at Atmospheric and Elevated Temperature and Pressure Conditions

Volume 2: Combustion, Fuels and Emissions, Parts A and B ◽

10.1115/gt2010-23270 ◽

2010 ◽

Cited By ~ 3

Author(s):

Audrius Bagdanavicius ◽

Nasser Shelil ◽

Philip J. Bowen ◽

Nick Syred ◽

Andrew P. Crayford

Keyword(s):

Carbon Dioxide ◽

Elevated Temperature ◽

Turbulence Intensity ◽

Alternative Fuels ◽

Burning Velocity ◽

Gas Mixture ◽

Bunsen Burner ◽

Swirl Burner ◽

Temperature And Pressure ◽

Methane Carbon

Increasing interest in alternative fuels for gas turbines stimulates research in gaseous fuels other than natural gas. Various gas mixtures, based on methane as the main component, are considered as possible fuels in the future. In particular, methane enrichment with hydrogen or dilution with carbon dioxide is of considerable interest. Some experiments and numerical calculations have been undertaken to investigate methane-hydrogen and methane-carbon dioxide gas flames, however most of these investigations are limited by particular pressure or temperature conditions. This paper presents the investigation of the combustion of methane–carbon dioxide mixtures at atmospheric and elevated temperature and pressure conditions. Two experimental rigs were used, a Bunsen burner and swirl burner. Bunsen burner experiments were performed in the High Pressure Optical Chamber, which is located within the Gas Turbine Research Centre of Cardiff University — at 3 bara and 7 bara pressure, and 473 K, 573 K and 673 K temperature conditions for lean and rich mixtures. Planar Laser Tomography (PLT) was applied to investigate turbulent burning velocity. Burning velocity of the gas mixture was calculated using two different image processing techniques and the difference in the results obtained using these two techniques is presented and discussed. Laser Doppler anemometry (LDA) was utilised to define turbulence characteristics such as turbulence intensity and integral length scale. Due to the variability of the velocity flow field and turbulence intensity across Bunsen burners, the importance of measuring position and conditions is discussed. The sensitivity of this variance on the flame regime as defined in the Borghi diagram is evaluated. In the second part of the study, a generic swirl burner was used to define the flame flashback limits for methane–carbon dioxide mixtures at atmospheric conditions. The gas mixture stability graphs are plotted, and the effect of CO2 addition are discussed.

Download Full-text