scholarly journals Planting-Time and Rescue Applications of Furadan 4F for Control of Northern and Western Corn Rootworm Larvae in South Dakota, 1994

1995 ◽  
Vol 20 (1) ◽  
pp. 165-165
Author(s):  
B. W. Fuller ◽  
M. A. Boetel ◽  
J. M. Jenson ◽  
D. J. Thompson
1995 ◽  
Vol 20 (1) ◽  
pp. 161-161
Author(s):  
M. A. Boetel ◽  
B. W. Fuller ◽  
J. M. Jensen ◽  
D. J. Thompson

Abstract Cornfields were chosen at Aurora and Cavour South Dakota based on corn rootworm egg and adult surveys. Therefore, offering the potential for significant larval pressures during this study. The experiment was conducted to compare efficacy of preplant-incorporation (PPI) with traditional planting-time insecticide application methods (banded or in-furrow) for controlling rootworm larvae. The PPI treatments were applied using a hand-held spray boom equipped with 4 Teejet 8002 nozzles spaced 46 cm apart. Delivery rate was 20 gpa at 25 psi while travelling at 3 mph. Immediately following liquid applications, the soil was tilled with a tandem disk harrow at a 5 to 8 cm depth for insecticide incorporation. Granular materials were applied using Noble metering units on an adapted Kinze 4-row corn planter using band or in-furrow insecticide placement methods. Metering units were calibrated on the planter prior to insecticide applications. Treatment plots (15.25 m long rows spaced 96.5 cm apart) were arranged in a RCBD with 4 replications. Band treatments were applied in an 18-cm swath in front of the furrow-closing wheels, and incorporated by the wheels and drag chains. In-furrow applications consisted of directing granules immediately between double-disk furrow openers. Pioneer TR-3751’ (100-day) corn seed was planted at approximately 23,000 kernels per acre at each location. Five roots per replicate were dug, washed, examined for feeding damage and rated using the Iowa 1 to 6 scale. Data were analyzed with SAS’s General Linear Models procedure, and means were compared using DMRT.


1994 ◽  
Vol 19 (1) ◽  
pp. 186-186
Author(s):  
M. A. Boetel ◽  
B. W. Fuller ◽  
J. M. Jenson ◽  
W. W. Chambers

1994 ◽  
Vol 19 (1) ◽  
pp. 188-188
Author(s):  
M. A. Boetel ◽  
B. W. Fuller ◽  
J. M. Jenson

Abstract Three studies were conducted at 3 SD sites (Delmont, Garretson, and Sinai) to evaluate insecticide application rates and techniques (hand and in-furrow) for control of NCR and WCR larvae. A randomized complete block design with 4 replications was used in these studies. Individual treatment plots were single 15.25 m long rows spaced 96.5 cm apart. Insecticide granules were applied with modified, ground-driven Noble metering units mounted on a specially-adapted Kinze 4-row corn planter. Metering units were calibrated on the planter prior to insecticide applications. Banded treatments were applied in an 18 cm swath in front of the furrow-closing wheels, and incorporated by the wheels and drag chains. In-furrow applications consisted of directing granules immediately between double disk furrow openers. Corn was seeded at 23,000 kernels per acre at all locations. Five roots per replicate were dug for each treatment. Roots were then washed, examined for feeding damage, and rated using the Iowa 1 to 6 scale.


Sign in / Sign up

Export Citation Format

Share Document