Three-dimensional eddy current calculation using finite element method with A-V in conductor and Omega in vacuum

1988 ◽  
Vol 24 (1) ◽  
pp. 118-121 ◽  
Author(s):  
A. Kameari
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Eddy Current ◽  
Three Dimensional ◽  
Current Calculation ◽  
Element Method

A MSFEM to simulate the eddy current problem in laminated iron cores in 3D

2019 ◽  
Vol 38 (5) ◽  
pp. 1667-1682 ◽  
Author(s):  
Karl Hollaus
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Eddy Current ◽  
Eddy Currents ◽  
Three Dimensional ◽  
Harmonic Balance Method ◽  
Three Dimensions ◽  
Magnetic Vector Potential ◽  
Content Type ◽  
Element Method

Purpose The simulation of eddy currents in laminated iron cores by the finite element method (FEM) is of great interest in the design of electrical devices. Modeling each laminate by finite elements leads to extremely large nonlinear systems of equations impossible to solve with present computer resources reasonably. The purpose of this study is to show that the multiscale finite element method (MSFEM) overcomes this difficulty. Design/methodology/approach A new MSFEM approach for eddy currents of laminated nonlinear iron cores in three dimensions based on the magnetic vector potential is presented. How to construct the MSFEM approach in principal is shown. The MSFEM with the Biot–Savart field in the frequency domain, a higher-order approach, the time stepping method and with the harmonic balance method are introduced and studied. Findings Various simulations demonstrate the feasibility, efficiency and versatility of the new MSFEM. Originality/value The novel MSFEM solves true three-dimensional eddy current problems in laminated iron cores taking into account of the edge effect.

Towards Predicting Relative Belt Edge Endurance With the Finite Element Method

1990 ◽  
Vol 18 (4) ◽  
pp. 216-235 ◽  
Author(s):  
J. De Eskinazi ◽  
K. Ishihara ◽  
H. Volk ◽  
T. C. Warholic
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Three Dimensional ◽  
The Finite Element Method ◽  
Shear Deformations ◽  
Element Analysis ◽  
Vertical Loading ◽  
Predicted Values ◽  
Element Method

Abstract The paper describes the intention of the authors to determine whether it is possible to predict relative belt edge endurance for radial passenger car tires using the finite element method. Three groups of tires with different belt edge configurations were tested on a fleet test in an attempt to validate predictions from the finite element results. A two-dimensional, axisymmetric finite element analysis was first used to determine if the results from such an analysis, with emphasis on the shear deformations between the belts, could be used to predict a relative ranking for belt edge endurance. It is shown that such an analysis can lead to erroneous conclusions. A three-dimensional analysis in which tires are modeled under free rotation and static vertical loading was performed next. This approach resulted in an improvement in the quality of the correlations. The differences in the predicted values of various stress analysis parameters for the three belt edge configurations are studied and their implication on predicting belt edge endurance is discussed.

Sign in / Sign up

Export Citation Format

Share Document