Programmable fractional sample delay filters with flatness compromise between magnitude response and group delay

Author(s):  
Soo-Chang Pei ◽  
Bi-Ruei Chiou ◽  
Peng-Hua Wang
2013 ◽  
Vol 2013 ◽  
pp. 1-14 ◽  
Author(s):  
Madhu Jain ◽  
Maneesha Gupta ◽  
N. K. Jain

Proposed work deals with the design of a family of stable IIR digital integrators via use of minimax and pole, zero, and constant optimization methods. First the minimax optimization method is used to design a family of second-, third-, and fourth-order digital integrators by optimizing the magnitude response in a min-max sense under the satisfactory condition of constant group delay. Then the magnitude and group delay response is further improved using pole, zero, and constant optimization method. Subsequently, by modifying the transfer function of all of the designed integrators appropriately, new differentiators are obtained. Simulation results show that proposed approach outperforms existing design methods in terms of both magnitude and phase response.


2015 ◽  
Vol 63 (1) ◽  
pp. 209-216 ◽  
Author(s):  
J. Konopacki ◽  
K. Mościńska

Abstract FIR filters are often applied, as they possess many advantages, including linear-phase response and well elaborated design methods. However, group delay introduced by FIR filters is usually large. The reduction of group delay can be obtained by restriction of the linear phase requirement only to the passband. One of the problems that appear while designing FIR filters with a prescribed value of group delay is the choice of the filter order. In the paper a formula for filter order calculation for the given filter parameters and dedicated for equiripple or quasi-equiripple approximation of the magnitude response has been derived based on experiments. Numerous examples that explain how to use the derived formula have been included.


2020 ◽  
Vol 5 (11) ◽  
pp. 1365-1367
Author(s):  
Slavisa Ilić ◽  
Ahmad Mohammed Salih ◽  
Majid Hamid Abdullah ◽  
Dragiša Milić

A new design method for maximally flat IIR fullband differentiators with flat group delay responses is derived in this paper. The design method starts from the flatness conditions of magnitude response and group delay response at the origin. After mathematical manipulations it shows that presented design method reduces to solving the system of linear equations. By increasing the orders of polynomials in numerator and denominator, degrees of flatness are increased, that is improvement in magnitude responses and group delay responses in terms of flatness is obtained.


2012 ◽  
Vol 58 (2) ◽  
pp. 177-192 ◽  
Author(s):  
Marek Parfieniuk ◽  
Alexander Petrovsky

Near-Perfect Reconstruction Oversampled Nonuniform Cosine-Modulated Filter Banks Based on Frequency Warping and Subband MergingA novel method for designing near-perfect reconstruction oversampled nonuniform cosine-modulated filter banks is proposed, which combines frequency warping and subband merging, and thus offers more flexibility than known techniques. On the one hand, desirable frequency partitionings can be better approximated. On the other hand, at the price of only a small loss in partitioning accuracy, both warping strength and number of channels before merging can be adjusted so as to minimize the computational complexity of a system. In particular, the coefficient of the function behind warping can be constrained to be a negative integer power of two, so that multiplications related to allpass filtering can be replaced with more efficient binary shifts. The main idea is accompanied by some contributions to the theory of warped filter banks. Namely, group delay equalization is thoroughly investigated, and it is shown how to avoid significant aliasing by channel oversampling. Our research revolves around filter banks for perceptual processing of sound, which are required to approximate the psychoacoustic scales well and need not guarantee perfect reconstruction.


2014 ◽  
Vol 35 (12) ◽  
pp. 2921-2926
Author(s):  
Chen-xi Lu ◽  
Hong-yu Li ◽  
Feng Nian ◽  
Ke-ming Feng

Sign in / Sign up

Export Citation Format

Share Document