On compressed sensing for EEG signals - validation with P300 speller paradigm

Author(s):  
Monica Fira ◽  
Liviu Goras
Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 3961
Author(s):  
Daniela De Venuto ◽  
Giovanni Mezzina

In this paper, we propose a breakthrough single-trial P300 detector that maximizes the information translate rate (ITR) of the brain–computer interface (BCI), keeping high recognition accuracy performance. The architecture, designed to improve the portability of the algorithm, demonstrated full implementability on a dedicated embedded platform. The proposed P300 detector is based on the combination of a novel pre-processing stage based on the EEG signals symbolization and an autoencoded convolutional neural network (CNN). The proposed system acquires data from only six EEG channels; thus, it treats them with a low-complexity preprocessing stage including baseline correction, windsorizing and symbolization. The symbolized EEG signals are then sent to an autoencoder model to emphasize those temporal features that can be meaningful for the following CNN stage. This latter consists of a seven-layer CNN, including a 1D convolutional layer and three dense ones. Two datasets have been analyzed to assess the algorithm performance: one from a P300 speller application in BCI competition III data and one from self-collected data during a fluid prototype car driving experiment. Experimental results on the P300 speller dataset showed that the proposed method achieves an average ITR (on two subjects) of 16.83 bits/min, outperforming by +5.75 bits/min the state-of-the-art for this parameter. Jointly with the speed increase, the recognition performance returned disruptive results in terms of the harmonic mean of precision and recall (F1-Score), which achieve 51.78 ± 6.24%. The same method used in the prototype car driving led to an ITR of ~33 bit/min with an F1-Score of 70.00% in a single-trial P300 detection context, allowing fluid usage of the BCI for driving purposes. The realized network has been validated on an STM32L4 microcontroller target, for complexity and implementation assessment. The implementation showed an overall resource occupation of 5.57% of the total available ROM, ~3% of the available RAM, requiring less than 3.5 ms to provide the classification outcome.


2017 ◽  
Author(s):  
Saleh Alzahrani ◽  
Charles W Anderson

Objective: The P300 signal is an electroencephalography (EEG) positive deflection observed 300 ms to 600 ms after an infrequent, but expected, stimulus is presented to a subject. The aim of this study was to investigate the capability of Emotiv EPOC+ headset to capture and record the P300 wave. Moreover, the effects of using different matrix sizes, flash duration, and colors were studied. Methods: Participants attended to one cell of either 6x6 or 3x3 matrix while the rows and columns flashed randomly at different duration (100 ms or 175 ms). The EEG signals were sent wirelessly to OpenViBE software, which is used to run the P300 speller. Results: The results provide evidence of capability of the Emotiv EPOC+ headset to detect the P300 signals from two channels, O1 and O2. In addition, when the matrix size increases, the P300 amplitude increases. The results also show that longer flash duration resulted in larger P300 amplitude. Also, the effect of using colored matrix was clear on the O2 channel. Furthermore, results show that participants reached accuracy above 70% after three to four training sessions. Conclusion: The results confirmed the capability of the Emotiv EPOC+ headset for detecting P300 signals. In addition, matrix size, flash duration, and colors can affect the P300 speller performance. Significance: Such an affordable and portable headset could be utilized to control P300-based BCI or other BCI systems especially for the out-of-the-lab applications.


2017 ◽  
Author(s):  
Saleh Alzahrani ◽  
Charles W Anderson

Objective: The P300 signal is an electroencephalography (EEG) positive deflection observed 300 ms to 600 ms after an infrequent, but expected, stimulus is presented to a subject. The aim of this study was to investigate the capability of Emotiv EPOC+ headset to capture and record the P300 wave. Moreover, the effects of using different matrix sizes, flash duration, and colors were studied. Methods: Participants attended to one cell of either 6x6 or 3x3 matrix while the rows and columns flashed randomly at different duration (100 ms or 175 ms). The EEG signals were sent wirelessly to OpenViBE software, which is used to run the P300 speller. Results: The results provide evidence of capability of the Emotiv EPOC+ headset to detect the P300 signals from two channels, O1 and O2. In addition, when the matrix size increases, the P300 amplitude increases. The results also show that longer flash duration resulted in larger P300 amplitude. Also, the effect of using colored matrix was clear on the O2 channel. Furthermore, results show that participants reached accuracy above 70% after three to four training sessions. Conclusion: The results confirmed the capability of the Emotiv EPOC+ headset for detecting P300 signals. In addition, matrix size, flash duration, and colors can affect the P300 speller performance. Significance: Such an affordable and portable headset could be utilized to control P300-based BCI or other BCI systems especially for the out-of-the-lab applications.


2020 ◽  
Vol 6 (6) ◽  
pp. 065024
Author(s):  
Manika Rani Dey ◽  
Arsam Shiraz ◽  
Saeed Sharif ◽  
Jaswinder Lota ◽  
Andreas Demosthenous

Sign in / Sign up

Export Citation Format

Share Document