PID Control Based Tuning Method Performance in Electropneumatic Ballast Tank System for Remotely Operated Underwater Crawler

2020 ◽  
Author(s):  
M. Fahezal Ismail ◽  
M. Afeez Salbani M. Khairy ◽  
S. Evanslee ◽  
E. Ali Hamdin ◽  
Zalhan M. Zin
Keyword(s):  
Pid Control ◽  
Ballast Tank ◽  
Method Performance ◽  
Tuning Method ◽  
Tank System

Research on Adaptive PID Control for Load Simulator with Varying Load

2014 ◽  
Vol 568-570 ◽  
pp. 1031-1035
Author(s):  
Ju Tian ◽  
Yao Chen
Keyword(s):  
Pid Control ◽  
Simple Structure ◽  
Control Method ◽  
Parameter Tuning ◽  
Hardware In The Loop ◽  
Tuning Method ◽  
Hydraulic Load ◽  
Variation Characteristics ◽  
Load Simulator ◽  
Adaptive Pid Control

The electro-hydraulic load simulator is an important equipment for aircraft hardware-in-the-loop simulation. An adaptive PID control method for compensating extraneous torque with simple structure and easy to implement is proposed according to the variation characteristics of load gradient in the load simulator. The control parameter tuning method is also given.

Application of Fuzzy PID Control in Sluice Control

2012 ◽  
Vol 241-244 ◽  
pp. 1248-1254
Author(s):  
Feng Chen Huang ◽  
Hui Feng ◽  
Zhen Li Ma ◽  
Xin Hui Yin ◽  
Xue Wen Wu
Keyword(s):  
Fuzzy Control ◽  
Pid Control ◽  
Information Integration ◽  
Pid Controller ◽  
Fuzzy Pid ◽  
Proportional Integral Derivative ◽  
Fuzzy Pid Control ◽  
Tuning Method ◽  
Fuzzy Pid Controller ◽  
Self Tuning

Fuzzy control, based on traditional Proportional-Integral-Derivative (PID) control, is used to improve the management of a hydro-junction’s sluice scheduling. In this study, we combined the PID and Fuzzy control theories and determined the PID parameters of the fuzzy self-tuning method of a hydro-junction’s sluice. A fuzzy self-tuning PID controller and its algorithm were designed. In hydro-junction sluice control, the Fuzzy PID controller can modify PID parameters in real-time, resulting in a more dynamic response. The application of the fuzzy self-tuning PID controller in the CiHuai River project information integration system yielded very good results.

scholarly journals SISTEM KENDALI PROPORSIONAL, INTEGRAL, DAN DERIVATIF (PID) PADA PERSAMAAN PANAS

2016 ◽  
Vol 16 (2) ◽  
pp. 10-15
Author(s):  
Muhammad Ikhwan ◽  
Said Munzir ◽  
Nurmaulidar Nurmaulidar
Keyword(s):  
Control System ◽  
Heat Source ◽  
Pid Control ◽  
Heat Equations ◽  
Laplace Domain ◽  
Reaction Method ◽  
Stable Position ◽  
Proportional Integral ◽  
Tuning Method

This research showed the application of Proportional, Integral, and Derivative (PID) control system on heat equations that has non-integer ordered solutions on Laplace domain. Zala tuning method and Ziegler-Nichols method; which is ultimate cycle and process reaction method, are used to determine the value of Kp, Ti and Td as constants in PID to maintain the temperature of 1oC on the position of x = 3 m from the heat source with k = 0,042 m2s-1 diffusivity. Based on the results, there were ten systems that were closest in the desired criteria. With regards to overshoot and the time taken to reach the stable position, therefore the ten systems that are produced have not many differences in strengths and weaknesses. 

PID Controller Design for Two Tanks Liquid Level Control System Using Matlab

2015 ◽  
Vol 5 (3) ◽  
pp. 436 ◽  
Author(s):  
Mostafa Abdul Fellani ◽  
Aboubaker M. Gabaj
Keyword(s):  
Pid Controller ◽  
Controller Design ◽  
Liquid Level ◽  
Level Control ◽  
Process Industries ◽  
Tuning Method ◽  
Pid Tuning ◽  
Tank System ◽  
Pid Controller Design ◽  
Tuning Methods

The industrial application of Coupled Tank System (CTS) is widely used especially in chemical process industries. The control of liquid level in tanks and flow between tanks is a problem in the process technologies. The process technologies require liquids to be pumped, stored in tanks, and then pumped to another tank systematically. This paper presents development of Proportional-Integral-Derivative (PID) controller for controlling the desired liquid level of the CTS. Various conventional techniques of PID tuning method will be tested in order to obtain the PID controller parameters. Simulation is conducted within MATLAB environment to verify the performances of the system in terms of Rise Time (Ts), Settling Time (Ts), Steady State Error (SSE) and Overshoot (OS). The trial and error method of tunning will be implemented and all the performance results will be analyzed using MATLAB. It has been demonstrated that performances of CTS can be improved with appropriate technique of PID tuning methods.

Study on Auto-Tuning PID Controller

2014 ◽  
Vol 1037 ◽  
pp. 225-227
Author(s):  
Yin Ping Chen
Keyword(s):  
Pid Control ◽  
Pid Controller ◽  
Control Method ◽  
Industrial Process ◽  
Parameter Tuning ◽  
Relay Feedback ◽  
Tuning Method ◽  
Common Control ◽  
Auto Tuning ◽  
Tuning Methods

PID control is the most common control method used in process control. The PID control parameters tuning methods are develop constantly. At present, in numerous tuning methods, there are mainly two methods applied better in the practical industrial process. One is based on pattern identification (based on rules); the other is based on relay feedback (based on model). They are collectively referred to as intelligent PID parameter tuning method. This paper studies on the PID parameter auto-tuning methods and introduces the results of the latest research on this subject. Finally, the development direction of auto-tuning PID controller was also prospected.

Sign in / Sign up

Export Citation Format

Share Document