A High-$Q$ Quadruple-Mode Rectangular Waveguide Resonator

2019 ◽  
Vol 29 (5) ◽  
pp. 324-326 ◽  
Author(s):  
Gowrish Basavarajappa ◽  
Raafat R. Mansour
Author(s):  
Tianyu Zheng ◽  
Massimiliano Casaletti ◽  
Zhuoxiang Ren ◽  
Ahmed F. Abdelshafy ◽  
Filippo Capolino ◽  
...  

2020 ◽  
Author(s):  
Matthew Puckett ◽  
Kaikai Liu ◽  
Nitesh Chauhan ◽  
Qiancheng Zhao ◽  
Naijun Jin ◽  
...  

Abstract High Q optical resonators that are a key component for ultra-narrow linewidth lasers, frequency stabilization, precision spectroscopy and quantum applications. Integration of these resonators in a photonic waveguide wafer-scale platform is key to reducing their cost, size and power as well as sensitivity to environmental disturbances. However, to date, the intrinsic Q of integrated all-waveguide resonators has been relegated to below 150 Million for a non-etched waveguide resonator and 230 Million for a waveguide-coupled etched silica microresonator. Here, we report an all-waveguide Si3N4 resonator with an intrinsic Q of 422 Million and a 3.4 Billion absorption loss limited Q. The resonator linewidth measures at 453 kHz intrinsic linewidth, 906 kHz loaded linewidth with finesse of 3005. The corresponding linear loss of 0.060 dB/m is the lowest reported to date for an all-waveguide design with deposited upper cladding oxide. These are the highest intrinsic and absorption loss limited Q factors and lowest linewidth reported to date for a photonic integrated all-waveguide resonator. This level of performance is achieved through a careful reduction of scattering and absorption loss components and redeposition of a thin nitride layer. We quantify, simulate and measure the various loss contributions including scattering and absorption and describe a surface-state dangling bond absorption that we believe is passivated by the redeposited layer. In addition to the ultra-high Q and narrow linewidth, the resonator has a large optical mode area and volume, both critical for ultra-low laser linewidths and ultra-stable, ultra-low frequency noise reference cavities. These results demonstrate the performance of bulk optic and etched resonators can be realized in a photonic integrated solution, paving the way towards photonic integration compatible Billion Q cavities for precision scientific systems and applications such as nonlinear optics, atomic clocks, quantum photonics and high-capacity fiber communications systems on-chip.


IEEE Access ◽  
2017 ◽  
Vol 5 ◽  
pp. 12526-12532 ◽  
Author(s):  
Farouk Grine ◽  
Tarek Djerafi ◽  
Mohamed Taoufik Benhabiles ◽  
Ke Wu ◽  
Mohamed Lahdi Riabi

2020 ◽  
Vol 12 (10) ◽  
pp. 1005-1011 ◽  
Author(s):  
Lyudmila P. Mospan ◽  
Sergiy O. Steshenko

AbstractA novel waveguide resonator is proposed in the paper. The resonator is composed of three rectangular partial-height posts inserted along a rectangular waveguide cross-section. A pair of lateral posts is mounted symmetrically whereas the third antipodal post is centered. The resonator enables bandreject, singlet-type, and pseudoelliptic responses. The operating regimes are achieved by a manipulation with the pair of lateral posts, namely by changing their heights or their locations in a waveguide cross-section. A filtering function is realized as the third mode is exploited as the resonant one. Measurement data are presented for WR90 waveguide. An explanation of the resonant phenomena in post-based sections in terms of eigen regimes and interacting oscillations is proposed.


Sign in / Sign up

Export Citation Format

Share Document