Grid-connected Photovoltaic models for three-phase load flow analysis

2010 ◽  
Author(s):  
Syafii ◽  
Khalid Mohamed Nor ◽  
Mamdouh Abdel-Akher
Keyword(s):  
Flow Analysis ◽  
Load Flow ◽  
Load Flow Analysis ◽  
Three Phase

scholarly journals Modelling of Electric Grid to Enhance Generated Power Evacuation

2021 ◽  
pp. 163-173
Author(s):  
Donald Eloebhose ◽  
Nelson Ogbogu
Keyword(s):  
Power Plants ◽  
Short Circuit ◽  
Flow Analysis ◽  
Load Flow ◽  
System Stability ◽  
Contingency Analysis ◽  
Load Flow Analysis ◽  
Electric Power Grid ◽  
Three Phase ◽  
Rivers State

The study of evacuation of power from the power plants in Rivers State Nigeria, connecting to the 330kV transmission network of the Transmission Company of Nigeria (TCN). The Power World Simulator Educational version was used in the modelling and simulation of the electric power grid. The study of load flow analysis, short circuit, transient and N-1 contingency analysis and their effect on the 330 kV/132kV transmission bus connected to the existing power plants in Rivers State Nigeria namely; Rivers IPP (180MW), Afam III (265.6MW), Afam IV & V (351.00 MW) and Afam VI G. S (650.00 MW) was carried out. From the short circuit study, it is observed that when a bus is faulted with a 3-phase fault, the three-phase voltages of the system drastically become zero in all the phases. The other buses of the network experience an increase in voltage and all the buses fed have the same effect as the bus under fault, though the effect is felt more on the buses. However, with the introduction of substation splitting at Afam III and ongoing Afam IV substations, the short circuit level will be reduced by 15%; leading to improvement in the overall system stability.

scholarly journals A new method to incorporate three-phase power transformer model into distribution system load flow analysis

2021 ◽  
Vol 10 (3) ◽  
pp. 262
Author(s):  
Rudy Gianto ◽  
Purwoharjono Purwoharjono
Keyword(s):  
Distribution System ◽  
Power Transformer ◽  
Flow Analysis ◽  
Test System ◽  
Load Flow ◽  
Simple Method ◽  
System Load ◽  
Load Flow Analysis ◽  
Three Phase ◽  
Transformer Model

This paper proposes a new and simple method to incorporate three-phase power transformer model into distribution system load flow (DSLF) analysis. The objective of the present work is to find a robust and efficient technique for modeling and integrating power transformer in the DSLF analysis. The proposed transformer model is derived based on nodal admittance matrix and formulated by using the symmetrical component theory. Load flow formulation in terms of branch currents and nodal voltages is also proposed in this paper to enable integrating the model into the DSLF analysis. Singularity that makes the calculations in forward/backward sweep (FBS) algorithm is difficult to be carried out. It can be avoided in the method. The proposed model is verified by using the standard IEEE test system.

Sign in / Sign up

Export Citation Format

Share Document