Energy Storage Systems (EES) are key to further increase the penetration in energy grids of intermittent renewable energy sources, such as wind, by smoothing out power fluctuations. In order this to be economically feasible; however, the ESS need to be sized correctly and managed efficiently. In the study, the use of discrete wavelet transform (Daubechies Db4) to decompose the power output of utility-scale wind turbines into high and low-frequency components, with the objective of smoothing wind turbine power output, is discussed and applied to four-year Supervisory Control And Data Acquisition (SCADA) real data from multi-MW, on-shore wind turbines provided by the industrial partner. Two main research requests were tackled: first, the effectiveness of the discrete wavelet transform for the correct sizing and management of the battery (Li-Ion type) storage was assessed in comparison to more traditional approaches such as a simple moving average and a direct use of the battery in response to excessive power fluctuations. The performance of different storage designs was compared, in terms of abatement of ramp rate violations, depending on the power smoothing technique applied. Results show that the wavelet transform leads to a more efficient battery use, characterized by lower variation of the averaged state-of-charge, and in turn to the need for a lower battery capacity, which can be translated into a cost reduction (up to −28%). The second research objective was to prove that the wavelet-based power smoothing technique has superior performance for the real-time control of a wind park. To this end, a simple procedure is proposed to generate a suitable moving window centered on the actual sample in which the wavelet transform can be applied. The power-smoothing performance of the method was tested on the same time series data, showing again that the discrete wavelet transform represents a superior solution in comparison to conventional approaches.
WAVELET-BASED TRANSMISSION LINE FAULT DETECTION AND CLASSIFICATION