Effects of Transpiration on the Unsteady Separated Stagnation-Point Flow and Heat Transfer Over a Moving Porous Plate

2020 ◽  
Vol 142 (7) ◽  
Author(s):  
S. Dholey
Keyword(s):  
Heat Transfer ◽  
Stagnation Point ◽  
Porous Plate ◽  
The Other ◽  
Stagnation Point Flow ◽  
Strength Parameter ◽  
Physical Parameters ◽  
Flow Solution ◽  
Flow And Heat Transfer ◽  
Attached Flow

Abstract The combined influence of normal transpiration and tangential movement of a porous surface on the unsteady separated stagnation-point flow and heat transfer of a viscous fluid is studied. This study is based on five physical parameters, namely (i) flow strength parameter a, (ii) suction/injection parameter d, (iii) plate velocity parameter λ, (iv) unsteadiness parameter β, and (v) Prandtl number Pr. This analysis shows an interesting relation β = 2a which allows us to derive some closed-form analytic solutions depending upon the unlikely values of d. For suction d > 0, two attached flow solutions (AFS) without point of inflection are found in the range (−ad2/4−3<λ<−3), whereas for λ > −3 only one solution of the same type is found for any given value of d. Besides them, the numerical computations reveal two types of AFS—one without and the other with a point of inflection in the range (−1.24658 ≤λ≤ −1.07) when d = β = 0. The present analysis confirms the nonexistence of the second attached flow solution after a certain value of suction d depending upon the choice of the values of λ in this range. A reverse flow solution (RFS) along with the above two solutions is found for a negative value of β which continues even for large rate of suction d. The asymptotic solutions of this flow problem have also been derived for large values of d which provide with the exact results after a certain value of d depending upon the values of the other parameters.

Numerical solutions of non-alignment stagnation-point flow and heat transfer over a stretching/shrinking surface in a nanofluid

2016 ◽  
Vol 26 (6) ◽  
pp. 1747-1767 ◽  
Author(s):  
Ioan Pop ◽  
Kohi Naganthran ◽  
Roslinda Nazar
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Numerical Solutions ◽  
Dual Solutions ◽  
Stagnation Point Flow ◽  
Content Type ◽  
Boundary Layer Equations ◽  
Flow And Heat Transfer ◽  
Shrinking Surface

Purpose – The purpose of this paper is to analyse numerically the steady stagnation-point flow of a viscous and incompressible fluid over continuously non-aligned stretching or shrinking surface in its own plane in a water-based nanofluid which contains three different types of nanoparticles, namely, Cu, Al2O3 and TiO2. Design/methodology/approach – Similarity transformation is used to convert the system of boundary layer equations which are in the form of partial differential equations into a system of ordinary differential equations. The system of similarity governing equations is then reduced to a system of first-order differential equations and solved numerically using the bvp4c function in Matlab software. Findings – Unique solution exists when the surface is stretched and dual solutions exist as the surface shrunk. For the dual solutions, stability analysis has revealed that the first solution (upper branch) is stable and physically realizable, while the second solution (lower branch) is unstable. The effect of non-alignment is huge for the shrinking surface which is in contrast with the stretching surface. Practical implications – The results obtained can be used to explain the characteristics and applications of nanofluids, which are widely used as coolants, lubricants, heat exchangers and micro-channel heat sinks. This problem also applies to some situations such as materials which are manufactured by extrusion, production of glass-fibre and shrinking balloon. In this kind of circumstance, the rate of cooling and the stretching/shrinking process play an important role in moulding the final product according to preferable features. Originality/value – The present results are original and new for the study of fluid flow and heat transfer over a stretching/shrinking surface for the problem considered by Wang (2008) in a viscous fluid and extends to nanofluid by using the Tiwari and Das (2007) model.

Stability analysis on the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet with heat source effect

2018 ◽  
Vol 28 (11) ◽  
pp. 2650-2663 ◽  
Author(s):  
Fatinnabila Kamal ◽  
Khairy Zaimi ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Stability Analysis ◽  
Heat Source ◽  
Skin Friction ◽  
Stagnation Point ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type ◽  
Source Effect ◽  
Flow And Heat Transfer

PurposeThis paper aims to analyze the behavior of the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet in the presence of the viscous dissipation and heat source effects.Design/methodology/approachThe governing partial differential equations are converted into ordinary differential equations by similarity transformations before being solved numerically using the bvp4c function built in Matlab software. Effects of suction/injection parameter and heat source parameter on the skin friction and heat transfer coefficients as well as the velocity and temperature profiles are presented in the forms of tables and graphs. A temporal stability analysis will be conducted to verify which solution is stable for the dual solutions exist for the shrinking case.FindingsThe analysis indicates that the skin friction coefficient and the local Nusselt number as well as the velocity and temperature were influenced by suction/injection parameter. In contrast, only the local Nusselt number, which represents heat transfer rate at the surface, was affected by heat source effect. Further, numerical results showed that dual solutions were found to exist for the certain range of shrinking case. Then, the stability analysis is performed, and it is confirmed that the first solution is linearly stable and has real physical implication, while the second solution is not.Practical implicationsIn practice, the study of the steady two-dimensional stagnation-point flow and heat transfer past a permeable stretching/shrinking sheet in the presence of heat source effect is very crucial and useful. The problems involving fluid flow over stretching or shrinking surfaces can be found in many industrial manufacturing processes such as hot rolling, paper production and spinning of fibers. Owing to the numerous applications, the study of stretching/shrinking sheet was subsequently extended by many authors to explore various aspects of skin friction coefficient and heat transfer in a fluid. Besides that, the study of suction/injection on the boundary layer flow also has important applications in the field of aerodynamics and space science.Originality/valueAlthough many studies on viscous fluid has been investigated, there is still limited discoveries found on the heat source and suction/injection effects. Indeed, this paper managed to obtain the second (dual) solutions and stability analysis is performed. The authors believe that all the results are original and have not been published elsewhere.

Unsteady separated stagnation-point flow and heat transfer past a stretching/shrinking sheet in a copper-water nanofluid

2019 ◽  
Vol 29 (8) ◽  
pp. 2588-2605 ◽  
Author(s):  
Natalia C. Roşca ◽  
Alin V. Roşca ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Stagnation Point ◽  
Design Methodology ◽  
Similarity Transformation ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose The purpose of this paper is to theoretically investigate the unsteady separated stagnation-point flow and heat transfer past an impermeable stretching/shrinking sheet in a copper (Cu)-water nanofluid using the mathematical nanofluid model proposed by Tiwari and Das. Design/methodology/approach A similarity transformation is used to reduce the governing partial differential equations to a set of nonlinear ordinary (similarity) differential equations which are then solved numerically using the function bvp4c from Matlab for different values of the governing parameters. Findings It is found that the solution is unique for stretching case; however, multiple (dual) solutions exist for the shrinking case. Originality/value The authors believe that all numerical results are new and original, and have not been published elsewhere.

Sign in / Sign up

Export Citation Format

Share Document