scholarly journals Numerical Investigation of Wave-Body Interactions in Shallow Water

2014 ◽  
Author(s):  
Yi Luo ◽  
Torgeir Vada ◽  
Marilena Greco
Keyword(s):  
Free Surface ◽  
Boundary Conditions ◽  
Numerical Study ◽  
Surface Boundary ◽  
Regular Waves ◽  
Incoming Wave ◽  
Surface Boundary Conditions ◽  
First Case ◽  
Non Linear ◽  
Linear Effects

Present investigation is based on a numerical study using a time-domain Rankine panel method. The effort and novelty is to extend the applicability of the solver to shallower waters and to steeper waves by including additional non-linear effects, but in a way so to limit the increase in computational costs. The challenge is to assess the improvement with respect to the basic formulation and the recovery of linear theory in the limit of small waves. The wave theories included in the program are Airy, Stokes 5th order and Stream function. By their comparison the effect of the incoming-wave non-linearities can be investigated. For the free-surface boundary conditions two alternative formulations are investigated, one by Hui Sun [1] and one developed here. The two formulations combined with the above-mentioned wave theories are applied to two relevant problems. The first case is a fixed vertical cylinder in regular waves, where numerical results are compared with the model tests by Grue & Huseby [2]. The second case is a freely floating model of a LNG carrier (with zero forward speed) in regular waves, where computations are compared with the experimental results from the EC project “Extreme Seas”. This comparison revealed several challenges such as how to interpret/post process the experimental data. Some of these are described in the paper. After careful handling of both computed and measured data the comparisons show reasonable agreement. It is proven that including more non-linear effects in the free-surface boundary conditions can significantly improve the results. The formulation by Hui Sun gives better results compared to the linear condition, but the present formulation is shown to provide a further improvement, which can be explained through the nonlinear terms included/retained in the two approaches.

Novel free surface boundary conditions for spilling breaking waves

2020 ◽  
Vol 159 ◽  
pp. 103717
Author(s):  
Nikta Iravani ◽  
Peyman Badiei ◽  
Maurizio Brocchini
Keyword(s):  
Free Surface ◽  
Boundary Conditions ◽  
Breaking Waves ◽  
Surface Boundary ◽  
Surface Boundary Conditions

REEF3D::FNPF: A Flexible Fully Nonlinear Potential Flow Solver

2019 ◽  
Author(s):  
Hans Bihs ◽  
Weizhi Wang ◽  
Tobias Martin ◽  
Arun Kamath
Keyword(s):  
Wave Propagation ◽  
Free Surface ◽  
Boundary Conditions ◽  
Potential Flow ◽  
Surface Boundary ◽  
Flow Solver ◽  
Surface Boundary Conditions ◽  
Nonlinear Potential ◽  
Numerical Wave ◽  
Computational Resources

Abstract In situations where the calculation of ocean wave propagation and impact on offshore structures is required, fast numerical solvers are desired in order to find relevant wave events in a first step. After the identification of the relevant events, Computational Fluid Dynamics (CFD) based Numerical Wave Tanks (NWT) with an interface capturing two-phase flow approach can be used to resolve the complex wave structure interaction, including breaking wave kinematics. CFD models emphasize detail of the hydrodynamic physics, which makes them not the ideal candidate for the event identification due to the large computational resources involved. In the current paper a new numerical wave model is represented that solves the Laplace equation for the flow potential and the nonlinear kinematic and dynamics free surface boundary conditions. This approach requires reduced computational resources compared to CFD based NWTs. In contrast to existing approaches, the resulting fully nonlinear potential flow solver REEF3D::FNPF uses a σ-coordinate grid for the computations. Solid boundaries are incorporated through a ghost cell immersed boundary method. The free surface boundary conditions are discretized using fifth-order WENO finite difference methods and the third-order TVD Runge-Kutta scheme for time stepping. The Laplace equation for the potential is solved with Hypres stabilized bi-conjugated gradient solver preconditioned with geometric multi-grid. REEF3D::FNPF is fully parallelized following the domain decomposition strategy and the MPI communication protocol. The model is successfully tested for wave propagation benchmark cases for shallow water conditions with variable bottom as well as deep water.

A Comparison of Dirichlet and Neumann Wavemakers for the Numerical Generation and Propagation of Nonlinear Long-Crested Surface Waves

2004 ◽  
Vol 126 (4) ◽  
pp. 287-296
Author(s):  
R. E. Baddour ◽  
W. Parsons
Keyword(s):  
Free Surface ◽  
Boundary Conditions ◽  
Surface Boundary ◽  
Good Resolution ◽  
Homogeneous Fluid ◽  
Surface Boundary Conditions ◽  
Lateral Boundary Conditions ◽  
Curvilinear Coordinate ◽  
Numerical Generation ◽  
Neumann Model

We are studying numerically the problem of generation and propagation of long-crested gravity waves in a tank containing an incompressible inviscid homogeneous fluid initially at rest with a horizontal free surface of finite extent and of infinite depth. A nonorthogonal curvilinear coordinate system, which follows the free surface, is constructed and the full nonlinear kinematic and dynamic free surface boundary conditions are utilized in the algorithm. “Wavemakers” are modeled using both the Dirichlet and Neumann lateral boundary conditions and a full comparison is given. Overall, the Dirichlet model was more stable than the Neumann model, with an upper limit steepness S=2A/λ of 0.08 using good resolution compared with the Neumann’s maximum of 0.05.

A numerical nonlinear analysis of two-dimensional ventilating entry of surface-piercing hydrofoils with effects of gravity

2010 ◽  
Vol 658 ◽  
pp. 383-408 ◽  
Author(s):  
VIMAL VINAYAN ◽  
SPYROS A. KINNAS
Keyword(s):  
Free Surface ◽  
Boundary Conditions ◽  
Numerical Scheme ◽  
Suction Side ◽  
Nonlinear Boundary Conditions ◽  
Surface Boundary ◽  
Two Dimensional ◽  
Surface Boundary Conditions ◽  
Dimensional Boundary ◽  
Nonlinear Free Surface

The presence of the free surface adds an element of difficulty to the development of numerical and theoretical methods for the performance prediction of surface-piercing hydrofoils. Existing methods of analysis for two-dimensional surface-piercing hydrofoils or blade sections of a surface-piercing propeller solve either a linear problem, assuming a thin section and ventilated surface along with linear free-surface boundary conditions, or a nonlinear problem in a self-similar setting. Both these approaches cannot be used when the effects of gravity are important, which is the case when a craft is operating at low speeds. A two-dimensional boundary-element-method-based numerical scheme is presented here that overcomes these drawbacks by solving the fully ventilated flow past a surface-piercing hydrofoil of finite dimensions and includes the whole gamut of nonlinear free-surface interactions. The unique aspect of the numerical scheme is that fully nonlinear boundary conditions are applied on the free surface which allows for the accurate modelling of the jet generated on the wetted boundary and the ventilated surface formed on the suction side as a result of the passage of the hydrofoil through the free surface. Moreover, the effects of gravity can be considered to take into account the influence of the Froude number. Ventilated-surface shapes predicted by the present scheme are compared with existing experimental results and are shown to be in good agreement.

Sign in / Sign up

Export Citation Format

Share Document