French RPV PTS Assessment: An Overview of EDF Research and Development in Progress on Thermalhydraulic, Materials and Mechanical Aspects

2003 ◽  
Author(s):  
Dominique Moinereau ◽  
Jean-Michel Frund ◽  
Henriette Churier-Bossennec ◽  
Georges Bezdikian ◽  
Alain Martin
Keyword(s):  
Structural Integrity ◽  
Three Dimensional ◽  
Crack Arrest ◽  
Pressure Vessels ◽  
Short Description ◽  
Constraint Effect ◽  
Materials Properties ◽  
Integrity Assessment ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

A significant extensive Research & Development work is conducted by Electricite´ de France (EDF) related to the structural integrity re-assessment of the French 900 and 1300 MWe reactor pressure vessels in order to increase their lifetime. Within the framework of this programme, numerous developments have been implemented or are in progress related to the methodology to assess flaws during a pressurized thermal shock (PTS) event. The paper contains three aspects: a short description of the specific French approach for RPV PTS assessment, a presentation of recent improvements on thermalhydraulic, materials and mechanical aspects, and finally an overview of the present R&D programme on thermalhydraulic, materials and mechanical aspects. Regarding the last aspect on present R&D programme, several projects in progress will be shortly described. This overview includes the redefinition of some significant thermalhydraulic transients based on some new three-dimensional CFD computations (focused at the present time on small break LOCA transient), the assessment of vessel materials properties, and the improvement of the RPV PTS structural integrity assessment including several themes such as warm pre-stress (WPS), crack arrest, constraint effect ....

Probabilistic Structural Integrity Analysis of Reactor Pressure Vessels During Pressurized Thermal Shock Events

2013 ◽  
Vol 136 (1) ◽  
Author(s):  
Koichi Masaki ◽  
Jinya Katsuyama ◽  
Kunio Onizawa
Keyword(s):  
Crack Initiation ◽  
Thermal Shock ◽  
Structural Integrity ◽  
Fracture Probability ◽  
Pressure Vessels ◽  
Sensitivity Analyses ◽  
Conditional Probabilities ◽  
Integrity Assessment ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

To apply a probabilistic fracture mechanics (PFM) analysis to the structural integrity assessment of a reactor pressure vessel (RPV), a PFM analysis code has been developed at JAEA. Using this PFM analysis code, pascal version 3, the conditional probabilities of crack initiation (CPIs) and fracture for an RPV during pressurized thermal shock (PTS) events have been analyzed. Sensitivity analyses on certain input parameters were performed to clarify their effect on the conditional fracture probability. Comparisons between the conditional probabilities and the temperature margin (ΔTm) based on the current deterministic analysis method were made for various model plant conditions for typical domestic older types of RPVs. From the analyses, a good correlation between ΔTm and the conditional probability of crack initiation was obtained.

Probabilistic Structural Integrity Analysis of Reactor Pressure Vessels During PTS Events

2012 ◽  
Author(s):  
Kunio Onizawa ◽  
Koichi Masaki ◽  
Jinya Katsuyama
Keyword(s):  
Crack Initiation ◽  
Structural Integrity ◽  
Fracture Probability ◽  
Pressure Vessels ◽  
Sensitivity Analyses ◽  
Conditional Probabilities ◽  
Integrity Assessment ◽  
Pressurized Thermal Shock ◽  
Integrity Analysis ◽  
Reactor Pressure

In order to apply a probabilistic fracture mechanics (PFM) analysis to the structural integrity assessment of a reactor pressure vessel (RPV), PFM analysis code has been developed at JAEA. Using the PFM analysis code, PASCAL version 3, the conditional probabilities of crack initiation and fracture for an RPV during pressurized thermal shock events have been analyzed. Sensitivity analyses on some input parameters were performed to clarify the effect on the conditional fracture probability. Comparison between the conditional probabilities and temperature margin (ΔTm) from current deterministic analysis method were made for some model plant conditions of domestic typical old-type RPVs. From the analyses, a good correlation between ΔTm and the conditional probability of crack initiation was obtained.

Development of Probabilistic Fracture Mechanics Analysis Code PASCAL Version 4 for Reactor Pressure Vessels

2018 ◽  
Author(s):  
Kai Lu ◽  
Koichi Masaki ◽  
Jinya Katsuyama ◽  
Yinsheng Li ◽  
Shumpei Uno
Keyword(s):  
Structural Integrity ◽  
Prediction Method ◽  
Pressure Vessels ◽  
Stress Distributions ◽  
Irradiation Embrittlement ◽  
Energy Agency ◽  
Integrity Assessment ◽  
Failure Frequency ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

In Japan, Japan Atomic Energy Agency has developed a PFM analysis code PASCAL (PFM Analysis of Structural Components in Aging LWRs) for structural integrity assessment of Japanese reactor pressure vessels (RPVs) considering neutron irradiation embrittlement and pressurized thermal shock transients. By reflecting the latest knowledge and findings, the PASCAL code has been continuously improved. In this paper, the development of PASCAL Version 4 (hereafter, PASCAL4) is described. Several analysis functions incorporated into PASCAL4 for evaluating the failure frequency of RPVs are introduced, for example, the evaluation function of confidence level of failure frequency considering epistemic and aleatory uncertainties in probabilistic variables, the recent stress intensity factor (KI) solutions and KI calculation methods considering complicated stress distributions, and the recent Japanese irradiation embrittlement prediction method. Finally, using PASCAL4, a PFM analysis example for a Japanese model RPV is presented.

Structural integrity assessment of reactor pressure vessels during pressurized thermal shock

2008 ◽  
Vol 22 (8) ◽  
pp. 1451-1459 ◽  
Author(s):  
Myung Jo Jhung ◽  
Seok Hun Kim ◽  
Young Hwan Choi ◽  
Sunggyu Jung ◽  
Jong Min Kim ◽  
...  
Keyword(s):  
Thermal Shock ◽  
Structural Integrity ◽  
Pressure Vessels ◽  
Integrity Assessment ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

Good Practice Handbook for PTS Evaluation (Result of the IAEA Co-Ordinated Project on PTS)

2009 ◽  
Author(s):  
Vladislav Pistora ◽  
Milan Brumovsky ◽  
Nigel Taylor
Keyword(s):  
Thermal Shock ◽  
Best Practice ◽  
Structural Integrity ◽  
Good Practice ◽  
Pressure Vessels ◽  
Research Project ◽  
Integrity Assessment ◽  
Pressurized Thermal Shock ◽  
Sensitivity Studies ◽  
Reactor Pressure

Integrity and lifetime of reactor pressure vessels are practically determined by their behavior during “pressurized thermal shock” (PTS) emergency regimes as the most severe regimes during reactor operation. Assessment of these potential regimes is carried out mostly in deterministic way but used procedures are different in different countries. Proper and reliable evaluation of these PTS regimes depends on many parameters and approaches used during computations. During the period 2005 – 2008, the Coordinated Research Project 9 (CRP 9) “Review and Benchmark of Calculation Methods for Structural Integrity Assessment of RPVs During PTS” was organised by the IAEA. The overall objective of this Coordinated Research Project was to perform benchmark deterministic calculations of a typical pressurised thermal shock (PTS) regime and finally to recommend the best practice for PTS assessment. This paper describes main results and collected experience within this project that were bases for the preparation of the “Good Practice Handbook for Deterministic Evaluation of the Integrity of a Reactor Pressure Vessel during a Pressurised Thermal Shock” that will be issued as an IAEA TECDOC. Main parameters discussed in this handbook are: - selection of overcooling sequences; - thermal-hydraulics analyses; - temperature and stress field calculations; - crack tip loading incl.K estimations; - integrity assessment; - analyses of nozzles; - national practices; - results from sensitivity studies. Finally, recommendations for reliable and correct PTS evaluation are given.

NESC-VII: Fracture Mechanics Analyses of WPS Experiments on Large-Scale Cruciform Specimen

2011 ◽  
Author(s):  
Shengjun Yin ◽  
Paul T. Williams ◽  
B. Richard Bass
Keyword(s):  
Fracture Mechanics ◽  
Large Scale ◽  
Structural Integrity ◽  
National Laboratory ◽  
Pressure Vessels ◽  
Cooperative Action ◽  
Oak Ridge ◽  
Integrity Assessment ◽  
Feasibility Test ◽  
Reactor Pressure

This paper describes numerical analyses performed to simulate warm pre-stress (WPS) experiments conducted with large-scale cruciform specimens within the Network for Evaluation of Structural Components (NESC-VII) project. NESC-VII is a European cooperative action in support of WPS application in reactor pressure vessel (RPV) integrity assessment. The project aims in evaluation of the influence of WPS when assessing the structural integrity of RPVs. Advanced fracture mechanics models will be developed and performed to validate experiments concerning the effect of different WPS scenarios on RPV components. The Oak Ridge National Laboratory (ORNL), USA contributes to the Work Package-2 (Analyses of WPS experiments) within the NESC-VII network. A series of WPS type experiments on large-scale cruciform specimens have been conducted at CEA Saclay, France, within the framework of NESC VII project. This paper first describes NESC-VII feasibility test analyses conducted at ORNL. Very good agreement was achieved between AREVA NP SAS and ORNL. Further analyses were conducted to evaluate the NESC-VII WPS tests conducted under Load-Cool-Transient-Fracture (LCTF) and Load-Cool-Fracture (LCF) conditions. This objective of this work is to provide a definitive quantification of WPS effects when assessing the structural integrity of reactor pressure vessels. This information will be utilized to further validate, refine, and improve the WPS models that are being used in probabilistic fracture mechanics computer codes now in use by the NRC staff in their effort to develop risk-informed updates to Title 10 of the U.S. Code of Federal Regulations (CFR), Part 50, Appendix G.

Structural Integrity Assessment of Doel 3 and Tihange 2 RPVs Affected by Hydrogen Flakes: Refined X-FEM Analyses

2016 ◽  
Author(s):  
Pierre Dulieu ◽  
Valéry Lacroix
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Extended Finite Element Method ◽  
Structural Integrity ◽  
Pressure Vessels ◽  
Extended Finite Element ◽  
Integrity Assessment ◽  
Safety Case ◽  
Component Manufacturing ◽  
Reactor Pressure

During the 2012 outage at Doel 3 and Tihange 2 Nuclear Power Plants, specific ultrasonic in-service inspections revealed a large number of quasi-laminar indications in the base metal of the reactor pressure vessels, mainly in the lower and upper core shells. The observed indications could subsequently be attributed to hydrogen flaking induced during the component manufacturing process. As a consequence, a Flaw Acceptability Assessment had to be performed as a part of the Safety Case demonstrating the fitness-for-service of these units. In that framework, detailed analyses using eXtended Finite Element Method were conducted to model the specific character of hydrogen flakes. Their quasi-laminar orientation as well as their high density required setting up 3D multi-flaws model accounting for flaw interaction. These calculations highlighted that even the most penalizing flaw configurations are harmless in terms of structural integrity despite the consideration of higher degradation of irradiated material toughness.

Development of Probabilistic Evaluation Models of Fracture Toughness KIc and KIa for Japanese RPV Steels

2015 ◽  
Author(s):  
Jinya Katsuyama ◽  
Genshichiro Katsumata ◽  
Kunio Onizawa ◽  
Kazuya Osakabe ◽  
Kentaro Yoshimoto
Keyword(s):  
Fracture Toughness ◽  
Structural Integrity ◽  
Fracture Probability ◽  
Pressure Vessels ◽  
Confidence Limits ◽  
Lognormal Distributions ◽  
Integrity Assessment ◽  
Probabilistic Evaluation ◽  
Evaluation Models ◽  
Reactor Pressure

Probabilistic fracture mechanics (PFM) analysis code PASCAL3 has been developed to apply the PFM analysis to the structural integrity assessment of domestic reactor pressure vessels (RPVs). In this paper, probabilistic evaluation models of fracture toughness KIc and KIa which have the largest scatter among the associated factors based on the database of Japanese RPV steels are presented. We developed probabilistic evaluation models for KIc and KIa based on the Weibull and lognormal distributions, respectively. The models are compared with the existing lower bound of fracture toughness in the Japanese code and probabilistic model in USA. As the results, the 5% confidence limits of the models established in present work corresponded to lower bounds of fracture toughness in the Japanese code. The comparison in the models between present work and USA showed significant differences that may have an influence on fracture probability of RPV.

Sign in / Sign up

Export Citation Format

Share Document